# Makefile.in generated by automake 1.14.1 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2013 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/enblend-enfuse
pkgincludedir = $(includedir)/enblend-enfuse
pkglibdir = $(libdir)/enblend-enfuse
pkglibexecdir = $(libexecdir)/enblend-enfuse
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-slackware-linux-gnu
host_triplet = x86_64-slackware-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/_ac_latex_test.m4 \
	$(top_srcdir)/m4/ac_latex_class.m4 \
	$(top_srcdir)/m4/ac_latex_package.m4 \
	$(top_srcdir)/m4/ac_prog_ar.m4 \
	$(top_srcdir)/m4/ac_prog_latex.m4 \
	$(top_srcdir)/m4/ac_type_sig_atomic_t.m4 \
	$(top_srcdir)/m4/ax_boost_base.m4 \
	$(top_srcdir)/m4/ax_cxx_as_const.m4 \
	$(top_srcdir)/m4/ax_cxx_compile_stdcxx_11.m4 \
	$(top_srcdir)/m4/ax_openmp.m4 \
	$(top_srcdir)/m4/ax_prog_perl_modules.m4 \
	$(top_srcdir)/m4/ax_with_prog.m4 $(top_srcdir)/m4/lrint.m4 \
	$(top_srcdir)/m4/lrintf.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
VPATH = # must be empty to keep srcdir free of products
ACLOCAL = ${SHELL} /root/tmp/se/enblend-enfuse-4.2/missing aclocal-1.14
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AR = ar
AUTOCONF = ${SHELL} /root/tmp/se/enblend-enfuse-4.2/missing autoconf
AUTOHEADER = ${SHELL} /root/tmp/se/enblend-enfuse-4.2/missing autoheader
AUTOMAKE = ${SHELL} /root/tmp/se/enblend-enfuse-4.2/missing automake-1.14
AWK = gawk
BOOST_CPPFLAGS = -I/usr/include
BOOST_LDFLAGS = -L/usr/lib64
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -pthread -I/usr/include/OpenEXR -O2 -fPIC -I/opt/lcms26/include
CONVERT = /usr/bin/convert
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -pthread -I/usr/include/OpenEXR -O2 -fPIC -I/opt/lcms26/include -std=gnu++11 -O2 -DNDEBUG
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DL_IMPLEMENTATION = libdynamic_loader_a-posix_implementation.o
DOT = false
DVIPDF = /usr/share/texmf/bin/dvipdfm
DVIPS = /usr/share/texmf/bin/dvips
DYNAMIC_TEX_PREAMBLE = \def\finishdynamicpreamble{\relax}
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
EXTRA_LIBS = 
GNUPLOT = /usr/bin/gnuplot
GREP = /usr/bin/grep
HAVE_CXX11 = 1
HAVE_INLINE = 
HELP2MAN = ${SHELL} /root/tmp/se/enblend-enfuse-4.2/missing help2man
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LATEX = /usr/share/texmf/bin/latex
LATEX2HTML = false
LATEX2HTML_LIBDIR = 
LDFLAGS = -Wl,--as-needed -Wl,--no-copy-dt-needed-entries -L/opt/24747LCMS/lib64 -llcms2
LIBOBJS = 
LIBS = -ldl -lvigraimpex -lIlmImf -lImath -lHalf -lIex -lIexMath -lIlmThread -pthread -llcms2 -ltiff -lpng -ljpeg -lz -lgsl -lgslcblas -lm 
LTLIBOBJS = 
M4 = /usr/bin/m4
MAKEINDEX = /usr/share/texmf/bin/makeindex
MAKEINFO = ${SHELL} /root/tmp/se/enblend-enfuse-4.2/missing makeinfo
MKDIR_P = /usr/bin/mkdir -p
OBJEXT = o
OPENEXR_CFLAGS = -pthread -I/usr/include/OpenEXR
OPENEXR_LIBS = -lIlmImf -lImath -lHalf -lIex -lIexMath -lIlmThread -pthread
PACKAGE = enblend-enfuse
PACKAGE_BUGREPORT = https://bugs.launchpad.net/enblend
PACKAGE_NAME = enblend-enfuse
PACKAGE_STRING = enblend-enfuse 4.2
PACKAGE_TARNAME = enblend-enfuse
PACKAGE_URL = 4.2
PACKAGE_VERSION = 4.2
PATH_SEPARATOR = :
PDFLATEX = /usr/share/texmf/bin/pdflatex
PERL = /usr/bin/perl
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = /usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig
POW_LIB = 
PS2PDF = /usr/bin/ps2pdf
RANLIB = ranlib
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
SPLITHTML = false
STRIP = 
SVGCONVERT = /usr/bin/rsvg-convert
TEXLOGANALYSER = cat
VERSION = 4.2
VIGRAIMPEX_LIB = -lvigraimpex
abs_builddir = /root/tmp/se/enblend-enfuse-4.2/doc
abs_srcdir = /root/tmp/se/enblend-enfuse-4.2/doc
abs_top_builddir = /root/tmp/se/enblend-enfuse-4.2
abs_top_srcdir = /root/tmp/se/enblend-enfuse-4.2
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
am__include = include
am__leading_dot = .
am__quote = 
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
amsmath = yes
bindir = ${exec_prefix}/bin
bold_extra = yes
boretti_classesansparametre = yes
build = x86_64-slackware-linux-gnu
build_alias = x86_64-slackware-linux
build_cpu = x86_64
build_os = linux-gnu
build_vendor = slackware
builddir = .
color = yes
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = /usr/doc/enblend-enfuse-4.2
dvidir = ${docdir}
enumitem = yes
exec_prefix = ${prefix}
float = yes
footnote = yes
graphicx = yes
host = x86_64-slackware-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
hyperref = yes
hyphenat = yes
ifpdf = yes
includedir = ${prefix}/include
index = yes
infodir = /usr/info
install_sh = ${SHELL} /root/tmp/se/enblend-enfuse-4.2/install-sh
latex = latex
latexsym = yes
libdir = /usr/lib64
libexecdir = ${exec_prefix}/libexec
listings = yes
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/man
microtype = yes
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
ragged2e = yes
refrep = 
report = yes
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
shorttoc = no
srcdir = .
suffix = no
sysconfdir = /etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
url = yes
xstring = no
SUBDIRS = examples
TEXINPUTS = .:$(LATEX2HTML_LIBDIR):$(srcdir):
LATEX_FLAGS = -file-line-error -halt-on-error -interaction nonstopmode
TEXLOGANALYSER_FLAGS = $(if $(subst cat,,$(TEXLOGANALYSER)),-hrt,)
MAKEINDEX_FLAGS = $(if $(subst false,,$(AM_V_P)),,-q)
PAPERSIZE = a4
PRINT_RESOLUTION = 600
DVIPS_FLAGS = -q -t $(PAPERSIZE) -D$(PRINT_RESOLUTION) -Z
LATEX2HTML_FLAGS = -O -I . -I $(srcdir) -fix
SPLITHTML_FLAGS = -tocbis
GNUPLOT_FLAGS = --default-settings -e 'DATA_DIR="$(srcdir)"'
GNUPLOT_PNG_TERMINAL_OPTIONS = enhanced transparent truecolor size 720,540
GNUPLOT_EPSLATEX_TERMINAL_OPTIONS = color size 4.5in,3.375in
DOTPP = $(M4)
DOTPP_FLAGS = --fatal-warnings --prefix-builtins --synclines
DOTPP_PRELOAD = $(srcdir)/uml-dot.m4
DOT_FLAGS = 
DOT_EPS_FLAGS = -Gsize=4.75,8.5
DOT_PNG_FLAGS = -Gbgcolor=transparent -Gresolution=$(PRINT_RESOLUTION)
SVGCONVERT_FLAGS = --dpi-x=96 --dpi-y=96
SVGCONVERT_EPS_FLAGS = $(SVGCONVERT_FLAGS) --format=eps
SVGCONVERT_PNG_FLAGS = $(SVGCONVERT_FLAGS) --format=png
CLEANTEX = $(srcdir)/cleantex
CONFIG2TEX = $(srcdir)/config2tex
DOCSTRINGS = $(srcdir)/docstrings
UPDATED_ON = $(srcdir)/updated-on
UPDATED_ON_FLAGS = \
    --database=source-code-manager \
    --override='none:\datebyunknown' \
    --override='fs:\datebyfs' \
    --override='scm:\datebyscm'


########################################################################
config2tex_verbose = $(config2tex_verbose_$(V))
config2tex_verbose_ = $(config2tex_verbose_$(AM_DEFAULT_VERBOSITY))
config2tex_verbose_0 = @echo "  CFG2TEX  $@";
convert_verbose = $(convert_verbose_$(V))
convert_verbose_ = $(convert_verbose_$(AM_DEFAULT_VERBOSITY))
convert_verbose_0 = @echo "  CONVERT  $@";
docstrings_verbose = $(docstrings_verbose_$(V))
docstrings_verbose_ = $(docstrings_verbose_$(AM_DEFAULT_VERBOSITY))
docstrings_verbose_0 = @echo "  DOCSTR   $@";
dvips_verbose = $(dvips_verbose_$(V))
dvips_verbose_ = $(dvips_verbose_$(AM_DEFAULT_VERBOSITY))
dvips_verbose_0 = @echo "  DVIPS    $@";
dot_verbose = $(dot_verbose_$(V))
dot_verbose_ = $(dot_verbose_$(AM_DEFAULT_VERBOSITY))
dot_verbose_0 = @echo "  DOT      $@";
svgconvert_verbose = $(svgconvert_verbose_$(V))
svgconvert_verbose_ = $(svgconvert_verbose_$(AM_DEFAULT_VERBOSITY))
svgconvert_verbose_0 = @echo "  SVGCONV  $@";
gnuplot_verbose = $(gnuplot_verbose_$(V))
gnuplot_verbose_ = $(gnuplot_verbose_$(AM_DEFAULT_VERBOSITY))
gnuplot_verbose_0 = @echo "  GNUPLOT  $@";
install_verbose = $(install_verbose_$(V))
install_verbose_ = $(install_verbose_$(AM_DEFAULT_VERBOSITY))
install_verbose_0 = @echo "  INSTALL  $@";
latex_verbose = $(call latex_verbose_$(V),$(1))
latex_verbose_ = $(call latex_verbose_$(AM_DEFAULT_VERBOSITY),$(1))
latex_verbose_0 = @echo "  LATEX    [pass $(1)] $@";
makeindex_verbose = $(call makeindex_verbose_$(V),$(1))
makeindex_verbose_ = $(call makeindex_verbose_$(AM_DEFAULT_VERBOSITY),$(1))
makeindex_verbose_0 = @echo "  MKIDX    [$(1)] $@";

########################################################################
PS2PDF_FLAGS = -r$(PRINT_RESOLUTION)
DVIPDF_FLAGS = -p $(PAPERSIZE) -r $(PRINT_RESOLUTION) -v
SHOW_LATEX_LOG = \
    rc=$$?; \
    if $(AM_V_P) || test $$rc -ne 0; \
    then \
      cat $(1); \
    else \
      $(TEXLOGANALYSER) $(TEXLOGANALYSER_FLAGS) $(1); \
    fi; \
    test $$rc -eq 0

SHOW_LATEX2HTML_LOG = \
    rc=$$?; \
    if $(AM_V_P); \
    then \
      cat $(1); \
    else \
      $(EGREP) '(Warning:|^Fixpoint)' $(1); \
    fi; \
    test $$rc -eq 0


########################################################################
DOCSTRING_SOURCE_FILES = \
    $(wildcard \
        $(addprefix $(srcdir)/../src/, \
	    *.h \
	    *.cc \
	    layer_selection/*.h \
	    layer_selection/*.cc))


########################################################################
ENBLEND_SOURCE_FILES = \
    $(wildcard $(srcdir)/common-*.tex) \
    $(wildcard $(srcdir)/enblend-*.tex) \
    $(addprefix $(srcdir)/, \
        enblend.tex \
        static-preamble.tex  lead-in.tex  lead-out.tex \
        index-def.tex  index-use.tex \
        macros.tex  floatstyle-ruledbot.sty  exemplar.hva \
        htmlstyle.tex  url-def.tex \
    )

ENBLEND_HYBRID_MATERIAL = \
    log-transform.gp

ENBLEND_EXTRA_MATERIAL = \
    external-mask-workflow.dot \
    internal-enblend-flow.dot \
    internal-optimizer-chain.dot \
    photographic-workflow.dot \
    \
    seam-line-visualization.tif

ENBLEND_GENERATED_FILES = \
    config-h.tex \
    dynamic-preamble.tex \
    enblend-variables.tex \
    enblend-version.tex

ENBLEND_DVI_SEPARATE_PREREQUISITES = \
    $(addsuffix .pstex,$(basename $(ENBLEND_HYBRID_MATERIAL))) \
    $(addsuffix .eps,$(basename $(ENBLEND_EXTRA_MATERIAL)))

ENBLEND_HTML_SEPARATE_PREREQUISITES = \
    $(addsuffix .png,$(basename $(ENBLEND_HYBRID_MATERIAL))) \
    $(addsuffix .png,$(basename $(ENBLEND_EXTRA_MATERIAL)))


########################################################################
ENFUSE_SOURCE_FILES = \
    $(wildcard $(srcdir)/common-*.tex) \
    $(wildcard $(srcdir)/enfuse-*.tex) \
    $(addprefix $(srcdir)/, \
        enfuse.tex \
        static-preamble.tex  lead-in.tex  lead-out.tex \
        index-def.tex  index-use.tex \
        macros.tex  floatstyle-ruledbot.sty  exemplar.hva \
        htmlstyle.tex  url-def.tex \
    )

ENFUSE_HYBRID_MATERIAL = \
    entropy-cutoff.gp \
    entropy.gp \
    exposure-cutoff.gp \
    exposure-weights.gp \
    fullsine.gp \
    gaussian.gp \
    halfsine.gp \
    laplacian-of-gaussian.gp \
    log-transform.gp \
    lorentzian.gp \
    power.gp \
    sharp-edge.gp \
    smooth-edge.gp

ENFUSE_EXTRA_MATERIAL = \
    external-mask-workflow.dot \
    focus-stack-decision-tree.dot \
    photographic-workflow.dot \
    \
    local-analysis-window.svg

ENFUSE_GENERATED_FILES = \
    config-h.tex \
    dynamic-preamble.tex \
    enfuse-variables.tex \
    enfuse-version.tex

ENFUSE_DVI_SEPARATE_PREREQUISITES = \
    $(addsuffix .pstex,$(basename $(ENFUSE_HYBRID_MATERIAL))) \
    $(addsuffix .eps,$(basename $(ENFUSE_EXTRA_MATERIAL)))

ENFUSE_HTML_SEPARATE_PREREQUISITES = \
    $(addsuffix .png,$(basename $(ENFUSE_HYBRID_MATERIAL))) \
    $(addsuffix .png,$(basename $(ENFUSE_EXTRA_MATERIAL)))

EXTRA_DIST = \
    $(wildcard $(srcdir)/*.data) \
    $(wildcard $(srcdir)/*.dot) \
    $(wildcard $(srcdir)/*.gp) \
    $(wildcard $(srcdir)/*.pm) \
    $(wildcard $(srcdir)/*.svg) \
    $(wildcard $(srcdir)/*.tex) \
    $(wildcard $(srcdir)/*.tif) \
    $(addprefix $(srcdir)/, \
        uml-dot.m4 \
        endoc.ist floatstyle-ruledbot.sty  exemplar.hva \
        cleantex config2tex docstrings updated-on \
    )

all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local \
	distclean-tags

dvi: dvi-recursive

dvi-am: dvi-local

html: html-recursive

html-am: html-local

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am: install-dvi-local

install-exec-am:

install-html: install-html-recursive

install-html-am: install-html-local

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am: install-pdf-local

install-ps: install-ps-recursive

install-ps-am: install-ps-local

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am: pdf-local

ps: ps-recursive

ps-am: ps-local

uninstall-am:

.MAKE: $(am__recursive_targets) install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	check check-am clean clean-generic clean-local cscopelist-am \
	ctags ctags-am distclean distclean-generic distclean-local \
	distclean-tags distdir dvi dvi-am dvi-local html html-am \
	html-local info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-dvi-local \
	install-exec install-exec-am install-html install-html-am \
	install-html-local install-info install-info-am install-man \
	install-pdf install-pdf-am install-pdf-local install-ps \
	install-ps-am install-ps-local install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
	pdf-am pdf-local ps ps-am ps-local tags tags-am uninstall \
	uninstall-am


.NOTPARALLEL:
export TEXINPUTS

########################################################################

.PHONY: all-local
all-local: ps-local html-local

.PHONY: ps-local
ps-local: enblend.ps enfuse.ps

.PHONY: pdf-local
pdf-local: enblend.pdf enfuse.pdf

.PHONY: html-local
html-local: enblend.html enfuse.html

.PHONY: dvi-local
dvi-local: enblend.dvi enfuse.dvi

.PHONY: enblend
enblend: enblend.ps enblend.html

.PHONY: enfuse
enfuse: enfuse.ps enfuse.html

.PHONY: clean-local
clean-local:
	- rm -f *.eps *.png *.pstex *.gp
	- rm -f *.{g,o,p,a}nd *.{g,o,p,a}dx
	- rm -f *.idx *.ilg *.ind *.lo{a,f,t,x} *.toc
	- rm -f *.aux *.log *.dvi *.ps *.pdf
	- rm -f *.html *.haux *.hind *.hlog
	- rm -f en*.{htoc,hpnd,hond,hgnd,haux,hand,hdgx}
	- rm -f enblend.out enblend.image.{tex,out} enblend-{variables,version}.tex
	- rm -f enfuse.out enfuse.image.{tex,out} enfuse-{variables,version}.tex
	- rm -f *_motif.gif
	- rm -f enblend{-index.html,.css,[0-9][0-9][0-9].html}
	- rm -f enfuse{-index.html,.css,[0-9][0-9][0-9].html}

.PHONY: distclean-local
distclean-local: clean-local
	- rm -f config-h.tex dynamic-preamble.tex
	- rm -f *~

.PHONY: FORCE

.PHONY: split-html
split-html: split-enblend-html split-enfuse-html

.PHONY: split-enblend-html
split-enblend-html: enblend-index.html

.PHONY: split-enfuse-html
split-enfuse-html: enfuse-index.html
%.ps.pdf: %.ps
	$(AM_V_GEN)$(PS2PDF) $(PS2PDF_FLAGS) $< $@
%.dvi.pdf: %.dvi
	$(AM_V_GEN)$(DVIPDF) $(DVIPDF_FLAGS) -o $@ $<

%.ps: %.dvi
	$(dvips_verbose)$(DVIPS) $(DVIPS_FLAGS) -o $@ $<

%.dvi %.pdf: $(srcdir)/%.tex $(srcdir)/endoc.ist
	@- rm -f $(foreach ext,aux toc lo[^g] ?nd ?dx,$(basename $@).$(ext))
	$(call latex_verbose,1)$(LATEX_TRANSLATOR) $(LATEX_FLAGS) $(EXTRA_LATEX_FLAGS) $< >/dev/null; \
            $(call SHOW_LATEX_LOG,$*.log)
	$(call makeindex_verbose,general terms)$(MAKEINDEX) $(MAKEINDEX_FLAGS) -s $(srcdir)/endoc.ist -o $*.gnd $*.gdx
	$(call makeindex_verbose,command-line options)$(MAKEINDEX) $(MAKEINDEX_FLAGS) -o $*.ond $*.odx
	$(call makeindex_verbose,applications and programs)$(MAKEINDEX) $(MAKEINDEX_FLAGS) -o $*.pnd $*.pdx
	$(call makeindex_verbose,syntactic comments)$(MAKEINDEX) $(MAKEINDEX_FLAGS) -o $*.and $*.adx
	$(call latex_verbose,2)$(LATEX_TRANSLATOR) $(LATEX_FLAGS) $(EXTRA_LATEX_FLAGS) $< >/dev/null; \
            $(call SHOW_LATEX_LOG,$*.log)
	@ max_iter=5; \
          iter=2; \
          while [ $$iter -le $$max_iter ] && \
                $(GREP) '^LaTeX Warning: There were undefined references' $*.log >/dev/null && \
                $(GREP) '^LaTeX Warning: Label(s) may have changed' $*.log >/dev/null; \
          do \
            iter=$$((iter + 1)); \
            if $(AM_V_P); then :; else printf '  LATEX    [pass %d] %s\n' $$iter $@; fi; \
            $(LATEX_TRANSLATOR) $(LATEX_FLAGS) $(EXTRA_LATEX_FLAGS) $< >/dev/null; \
                $(call SHOW_LATEX_LOG,$*.log); \
          done; \
          if [ $$iter -le $$max_iter ]; \
          then \
            printf 'Fixpoint reached in %i step(s)\n' $$iter; \
          else \
            printf 'Fixpoint NOT reached after %i steps; still undefined or loose labels\n' $$iter; \
            $(GREP) '^LaTeX Warning: Reference' $*.log; \
            false; \
          fi

%-index.html: %.html
	$(AM_V_GEN)$(SPLITHTML) $(SPLITHTML_FLAGS) -o $@ $<

%.html: $(srcdir)/%.tex
	$(AM_V_GEN)$(LATEX2HTML) $(LATEX2HTML_FLAGS) $< >$*.hlog 2>&1; \
            $(call SHOW_LATEX2HTML_LOG,$*.hlog)

%.cleantex.gp: $(srcdir)/%.gp
	$(AM_V_at)$(CLEANTEX) $^ > $@

%.png: %.cleantex.gp
	$(gnuplot_verbose)$(GNUPLOT) $(GNUPLOT_FLAGS) \
            -e 'set output "$@"; set terminal pngcairo $(GNUPLOT_PNG_TERMINAL_OPTIONS)' $<

# NOTE: `set output' gets the Encapsulated PostScript file's name
# right.  The `mv' command matches the LaTeX envelope's name to it.
%.pstex: $(srcdir)/%.gp
	$(gnuplot_verbose)$(GNUPLOT) $(GNUPLOT_FLAGS) \
            -e 'set output "$(basename $@).tex"; set terminal epslatex $(GNUPLOT_EPSLATEX_TERMINAL_OPTIONS)' $< && \
        mv $(basename $@).tex $@

%.eps: $(srcdir)/%.dot
	$(dot_verbose)$(DOTPP) $(DOTPP_FLAGS) --define='dot_output_type=eps' $(DOTPP_PRELOAD) $< | \
            $(DOT) $(DOT_FLAGS) -Teps $(DOT_EPS_FLAGS) -o$@

%.png: $(srcdir)/%.dot
	$(dot_verbose)$(DOTPP) $(DOTPP_FLAGS) --define='dot_output_type=png' $(DOTPP_PRELOAD) $< | \
            $(DOT) $(DOT_FLAGS) -Tpng $(DOT_PNG_FLAGS) | \
            $(CONVERT) png:- -transparent white -resize $$(( ((96 * 1000) / $(PRINT_RESOLUTION)) / 10 ))% $@

# ANTICIPATED CHANGE: Add a path via inkscape(1)
# INKSCAPE = ...
# %.pstex: $(srcdir)/%.svg
#         $(INKSCAPE) --without-gui --export-area-drawing --export-latex --export-eps=$(basename $@).eps --file=$<
#         mv $(basename $@).eps_tex $@
# Make the dependence on INKSCAPE optional, i.e. keep SVGCONVERT as
# mandatory converter.
%.eps: $(srcdir)/%.svg
	$(svgconvert_verbose)$(SVGCONVERT) $(SVGCONVERT_EPS_FLAGS) --output=$@ $<

%.png: $(srcdir)/%.svg
	$(svgconvert_verbose)$(SVGCONVERT) $(SVGCONVERT_PNG_FLAGS) --output=$@ $<

%.eps: $(srcdir)/%.tif
	$(convert_verbose)$(CONVERT) $< eps3:$@

%.png: $(srcdir)/%.tif
	$(convert_verbose)$(CONVERT) $< $@

%-version.tex: FORCE
	$(docstrings_verbose)$(DOCSTRINGS) key-value \
            UPDATED '$(shell $(UPDATED_ON) $(UPDATED_ON_FLAGS) $(FILES))' \
            VERSION '$(VERSION)' \
            DOCDIR '$(docdir)' > $@

config-h.tex: ../config.h
	$(config2tex_verbose)$(CONFIG2TEX) $< $@

dynamic-preamble.tex: FORCE
	$(AM_V_GEN)
	$(AM_V_at)printf '%%%%%% %s\n' '$(basename $@)' > $@
	$(AM_V_at)printf '\PassOptionsToPackage{%spaper}{report}\n' '$(PAPERSIZE)' >> $@
	$(AM_V_at)printf '\PassOptionsToPackage{%spaper}{refrep}\n' '$(PAPERSIZE)' >> $@
	$(AM_V_at)printf '\\newif\ifreferencemanual\n' >> $@
	$(AM_V_at)printf '\\newif\ifhyperref\n' >> $@
	$(AM_V_at)printf '\\def\\documentclassoptions{}\n' >> $@
	$(AM_V_at)printf '\\def\\finishdynamicpreamble{}\n' >> $@
	$(AM_V_at)printf '%%%% User definitions follow...\n' >> $@
	$(AM_V_at)printf '%s\n' '$(DYNAMIC_TEX_PREAMBLE)' >> $@

external-mask-workflow.eps focus-stack-decision-tree.eps photographic-workflow.eps \
external-mask-workflow.png focus-stack-decision-tree.png photographic-workflow.png: $(srcdir)/uml-dot.m4

entropy-cutoff.gp entropy.gp exposure-cutoff.gp exposure-weights.gp \
fullsine.gp gaussian.gp halfsine.gp laplacian-of-gaussian.gp \
log-transform.gp lorentzian.gp power.gp: colors.gp

enblend.pdf: LATEX_TRANSLATOR = $(PDFLATEX)

enblend.dvi: LATEX_TRANSLATOR = $(LATEX)

enblend.pdf enblend.dvi: \
    $(ENBLEND_SOURCE_FILES) \
    $(ENBLEND_GENERATED_FILES) \
    $(ENBLEND_DVI_SEPARATE_PREREQUISITES)

enblend.html: \
    $(ENBLEND_SOURCE_FILES) \
    $(ENBLEND_GENERATED_FILES) \
    $(ENBLEND_HTML_SEPARATE_PREREQUISITES)

enblend-variables.tex: $(filter-out %/enfuse.h %/enfuse.cc,$(DOCSTRING_SOURCE_FILES))
	$(docstrings_verbose)$(DOCSTRINGS) scan-files $^ > $@

enblend-version.tex: FILES = $(ENBLEND_SOURCE_FILES)

enfuse.pdf: LATEX_TRANSLATOR = $(PDFLATEX)

enfuse.dvi: LATEX_TRANSLATOR = $(LATEX)

enfuse.pdf enfuse.dvi: \
    $(ENFUSE_SOURCE_FILES) \
    $(ENFUSE_GENERATED_FILES) \
    $(ENFUSE_DVI_SEPARATE_PREREQUISITES)

enfuse.html: \
    $(ENFUSE_SOURCE_FILES) \
    $(ENFUSE_GENERATED_FILES) \
    $(ENFUSE_HTML_SEPARATE_PREREQUISITES)

enfuse-variables.tex: $(filter-out %/enblend.h %/enblend.cc,$(DOCSTRING_SOURCE_FILES))
	$(docstrings_verbose)$(DOCSTRINGS) scan-files $^ > $@

enfuse-version.tex: FILES = $(ENFUSE_SOURCE_FILES)

########################################################################

.PHONY: install-ps-local
install-ps-local: ps-local
	@ $(MKDIR_P) $(psdir)
	$(install_verbose)$(INSTALL_DATA) enblend.ps enfuse.ps $(psdir)

.PHONY: install-html-local
install-html-local: html-local
	@ $(MKDIR_P) $(htmldir)
	$(install_verbose)$(INSTALL_DATA) \
            $(sort \
                enblend.html $(ENBLEND_HTML_SEPARATE_PREREQUISITES) \
                enfuse.html $(ENFUSE_HTML_SEPARATE_PREREQUISITES) \
            ) \
            $(htmldir)

.PHONY: install-pdf-local
install-pdf-local: pdf-local
	@ $(MKDIR_P) $(pdfdir)
	$(install_verbose)$(INSTALL_DATA) enblend.pdf enfuse.pdf $(pdfdir)

.PHONY: install-dvi-local
install-dvi-local: dvi-local
	@ $(MKDIR_P) $(dvidir)
	$(install_verbose)$(INSTALL_DATA) \
            $(sort \
                enblend.dvi $(patsubst %.pstex,%.eps,$(ENBLEND_DVI_SEPARATE_PREREQUISITES)) \
                enfuse.dvi $(patsubst %.pstex,%.eps,$(ENFUSE_DVI_SEPARATE_PREREQUISITES)) \
            ) \
            $(dvidir)

.PHONY: install-split-html
install-split-html: split-html
	@ $(MKDIR_P) $(htmldir)
	$(install_verbose)$(INSTALL_DATA) \
            $(sort \
                enblend-index.html enblend.css $(wildcard enblend[0-9][0-9][0-9].html) \
                $(ENBLEND_HTML_SEPARATE_PREREQUISITES) \
                enfuse-index.html enfuse.css $(wildcard enfuse[0-9][0-9][0-9].html) \
                $(ENFUSE_HTML_SEPARATE_PREREQUISITES) \
                $(wildcard *_motif.gif) \
            ) \
            $(htmldir)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
