WARNING!  This is not a stand-alone installation disk!  You will also need 
the color1.gz root disk to install.

1. Boot the bootdisk.

2. When prompted, load the color1.gz rootdisk.  This contains the first
   half of the root filesystem.

3. After you've logged into the system with the username "root", you will
   be prompted to insert the color2.dsk disk.  This disk contains the 
   second half of the root filesystem.  The system will copy everything off
   the second disk, and into the ramdisk.  Please be patient while this
   goes on.

4. Now you're ready to proceed with installation as usual.  If you need
   to partition your drive with "fdisk" or "cfdisk", do that first, 
   otherwise go ahead and run "setup".