mhash-0.9.1/
mhash-0.9.1/acconfig.h
mhash-0.9.1/acinclude.m4
mhash-0.9.1/aclocal.m4
mhash-0.9.1/AUTHORS
mhash-0.9.1/ChangeLog
mhash-0.9.1/config.guess
mhash-0.9.1/config.sub
mhash-0.9.1/configure
mhash-0.9.1/configure.in
mhash-0.9.1/COPYING
mhash-0.9.1/depcomp
mhash-0.9.1/doc/
mhash-0.9.1/doc/example.c
mhash-0.9.1/doc/Makefile.am
mhash-0.9.1/doc/Makefile.in
mhash-0.9.1/doc/md5-rfc1321.txt
mhash-0.9.1/doc/mhash.0
mhash-0.9.1/doc/mhash.3
mhash-0.9.1/doc/mhash.html
mhash-0.9.1/doc/mhash.pod
mhash-0.9.1/doc/skid2-authentication
mhash-0.9.1/INSTALL
mhash-0.9.1/install-sh
mhash-0.9.1/lib/
mhash-0.9.1/lib/adler32.c
mhash-0.9.1/lib/bzero.c
mhash-0.9.1/lib/crc32.c
mhash-0.9.1/lib/gosthash.c
mhash-0.9.1/lib/haval.c
mhash-0.9.1/lib/keygen.c
mhash-0.9.1/lib/keygen.h
mhash-0.9.1/lib/keygen_asis.c
mhash-0.9.1/lib/keygen_hex.c
mhash-0.9.1/lib/keygen_mcrypt.c
mhash-0.9.1/lib/keygen_s2k.c
mhash-0.9.1/lib/libdefs.h
mhash-0.9.1/lib/libmhash.sym
mhash-0.9.1/lib/Makefile.am
mhash-0.9.1/lib/Makefile.in
mhash-0.9.1/lib/md4.c
mhash-0.9.1/lib/md5.c
mhash-0.9.1/lib/mhash.c
mhash-0.9.1/lib/mhash.h
mhash-0.9.1/lib/mhash_adler32.h
mhash-0.9.1/lib/mhash_crc32.h
mhash-0.9.1/lib/mhash_gost.h
mhash-0.9.1/lib/mhash_haval.h
mhash-0.9.1/lib/mhash_int.h
mhash-0.9.1/lib/mhash_md4.h
mhash-0.9.1/lib/mhash_md5.h
mhash-0.9.1/lib/mhash_ripemd.h
mhash-0.9.1/lib/mhash_sha1.h
mhash-0.9.1/lib/mhash_sha256_sha224.h
mhash-0.9.1/lib/mhash_sha512_sha384.h
mhash-0.9.1/lib/mhash_tiger.h
mhash-0.9.1/lib/mhash_whirlpool.h
mhash-0.9.1/lib/ripemd.c
mhash-0.9.1/lib/sha1.c
mhash-0.9.1/lib/sha256_sha224.c
mhash-0.9.1/lib/sha512_sha384.c
mhash-0.9.1/lib/swap.c
mhash-0.9.1/lib/tiger.c
mhash-0.9.1/lib/tiger_sboxes.c
mhash-0.9.1/lib/whirlpool.c
mhash-0.9.1/ltconfig
mhash-0.9.1/ltmain.sh
mhash-0.9.1/Makefile.am
mhash-0.9.1/Makefile.in
mhash-0.9.1/mhash.spec
mhash-0.9.1/mhash.spec.in
mhash-0.9.1/mhash_config.h.in
mhash-0.9.1/missing
mhash-0.9.1/mkinstalldirs
mhash-0.9.1/NEWS
mhash-0.9.1/README
mhash-0.9.1/src/
mhash-0.9.1/src/driver.c
mhash-0.9.1/src/frag_test.c
mhash-0.9.1/src/hash_test.sh
mhash-0.9.1/src/hmac_test.c
mhash-0.9.1/src/keygen_test.c
mhash-0.9.1/src/Makefile.am
mhash-0.9.1/src/Makefile.in
mhash-0.9.1/src/mhash_save_restore_test.c
mhash-0.9.1/THANKS
mhash-0.9.1/TODO
checking build system type... sparc-slackware-linux-gnu
checking host system type... sparc-slackware-linux-gnu
checking target system type... sparc-slackware-linux-gnu
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for sparc-slackware-linux-gcc... no
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether ln -s works... yes
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for sys/stat.h... (cached) yes
checking for sys/types.h... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for unistd.h... (cached) yes
checking utime.h usability... yes
checking utime.h presence... yes
checking for utime.h... yes
checking for bzero... yes
checking for signal... yes
checking for sigaction... yes
checking for memset... yes
checking for fcntl... yes
checking for fsync... yes
checking for lstat... yes
checking for stat... yes
checking for umask... yes
checking for utime... yes
checking for memmove... yes
checking for bcopy... yes
checking for size_t... yes
checking for unsigned long long int... yes
checking size of unsigned long long int... 8
checking for unsigned long int... yes
checking size of unsigned long int... 4
checking for unsigned int... yes
checking size of unsigned int... 4
checking for unsigned short int... yes
checking size of unsigned short int... 2
checking for unsigned char... yes
checking size of unsigned char... 1
checking whether byte ordering is bigendian... yes
checking for ld used by GCC... /usr/sparc-splack-linux/bin/ld
checking if the linker (/usr/sparc-splack-linux/bin/ld) is GNU ld... yes
checking for /usr/sparc-splack-linux/bin/ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking for a sed that does not truncate output... /usr/bin/sed
checking how to recognise dependent libraries... pass_all
checking command to parse nm output... ok
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for sparc-slackware-linux-ranlib... no
checking for ranlib... ranlib
checking for sparc-slackware-linux-strip... no
checking for strip... strip
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.lo... yes
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/sparc-splack-linux/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether -lc should be explicitly linked in... no
creating libtool
configure: creating ./config.status
config.status: creating Makefile
config.status: creating mhash.spec
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating mhash_config.h
config.status: executing depfiles commands
make  all-recursive
make[1]: Entering directory `/tmp/mhash-0.9.1'
Making all in lib
make[2]: Entering directory `/tmp/mhash-0.9.1/lib'
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT mhash.lo -MD -MP -MF ".deps/mhash.Tpo" \
  -c -o mhash.lo `test -f 'mhash.c' || echo './'`mhash.c; \
then mv -f ".deps/mhash.Tpo" ".deps/mhash.Plo"; \
else rm -f ".deps/mhash.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT swap.lo -MD -MP -MF ".deps/swap.Tpo" \
  -c -o swap.lo `test -f 'swap.c' || echo './'`swap.c; \
then mv -f ".deps/swap.Tpo" ".deps/swap.Plo"; \
else rm -f ".deps/swap.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT bzero.lo -MD -MP -MF ".deps/bzero.Tpo" \
  -c -o bzero.lo `test -f 'bzero.c' || echo './'`bzero.c; \
then mv -f ".deps/bzero.Tpo" ".deps/bzero.Plo"; \
else rm -f ".deps/bzero.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT crc32.lo -MD -MP -MF ".deps/crc32.Tpo" \
  -c -o crc32.lo `test -f 'crc32.c' || echo './'`crc32.c; \
then mv -f ".deps/crc32.Tpo" ".deps/crc32.Plo"; \
else rm -f ".deps/crc32.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT md5.lo -MD -MP -MF ".deps/md5.Tpo" \
  -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \
then mv -f ".deps/md5.Tpo" ".deps/md5.Plo"; \
else rm -f ".deps/md5.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT sha1.lo -MD -MP -MF ".deps/sha1.Tpo" \
  -c -o sha1.lo `test -f 'sha1.c' || echo './'`sha1.c; \
then mv -f ".deps/sha1.Tpo" ".deps/sha1.Plo"; \
else rm -f ".deps/sha1.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT haval.lo -MD -MP -MF ".deps/haval.Tpo" \
  -c -o haval.lo `test -f 'haval.c' || echo './'`haval.c; \
then mv -f ".deps/haval.Tpo" ".deps/haval.Plo"; \
else rm -f ".deps/haval.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT tiger.lo -MD -MP -MF ".deps/tiger.Tpo" \
  -c -o tiger.lo `test -f 'tiger.c' || echo './'`tiger.c; \
then mv -f ".deps/tiger.Tpo" ".deps/tiger.Plo"; \
else rm -f ".deps/tiger.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT tiger_sboxes.lo -MD -MP -MF ".deps/tiger_sboxes.Tpo" \
  -c -o tiger_sboxes.lo `test -f 'tiger_sboxes.c' || echo './'`tiger_sboxes.c; \
then mv -f ".deps/tiger_sboxes.Tpo" ".deps/tiger_sboxes.Plo"; \
else rm -f ".deps/tiger_sboxes.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT gosthash.lo -MD -MP -MF ".deps/gosthash.Tpo" \
  -c -o gosthash.lo `test -f 'gosthash.c' || echo './'`gosthash.c; \
then mv -f ".deps/gosthash.Tpo" ".deps/gosthash.Plo"; \
else rm -f ".deps/gosthash.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT keygen_hex.lo -MD -MP -MF ".deps/keygen_hex.Tpo" \
  -c -o keygen_hex.lo `test -f 'keygen_hex.c' || echo './'`keygen_hex.c; \
then mv -f ".deps/keygen_hex.Tpo" ".deps/keygen_hex.Plo"; \
else rm -f ".deps/keygen_hex.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT keygen_mcrypt.lo -MD -MP -MF ".deps/keygen_mcrypt.Tpo" \
  -c -o keygen_mcrypt.lo `test -f 'keygen_mcrypt.c' || echo './'`keygen_mcrypt.c; \
then mv -f ".deps/keygen_mcrypt.Tpo" ".deps/keygen_mcrypt.Plo"; \
else rm -f ".deps/keygen_mcrypt.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT keygen_asis.lo -MD -MP -MF ".deps/keygen_asis.Tpo" \
  -c -o keygen_asis.lo `test -f 'keygen_asis.c' || echo './'`keygen_asis.c; \
then mv -f ".deps/keygen_asis.Tpo" ".deps/keygen_asis.Plo"; \
else rm -f ".deps/keygen_asis.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT keygen.lo -MD -MP -MF ".deps/keygen.Tpo" \
  -c -o keygen.lo `test -f 'keygen.c' || echo './'`keygen.c; \
then mv -f ".deps/keygen.Tpo" ".deps/keygen.Plo"; \
else rm -f ".deps/keygen.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT keygen_s2k.lo -MD -MP -MF ".deps/keygen_s2k.Tpo" \
  -c -o keygen_s2k.lo `test -f 'keygen_s2k.c' || echo './'`keygen_s2k.c; \
then mv -f ".deps/keygen_s2k.Tpo" ".deps/keygen_s2k.Plo"; \
else rm -f ".deps/keygen_s2k.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT ripemd.lo -MD -MP -MF ".deps/ripemd.Tpo" \
  -c -o ripemd.lo `test -f 'ripemd.c' || echo './'`ripemd.c; \
then mv -f ".deps/ripemd.Tpo" ".deps/ripemd.Plo"; \
else rm -f ".deps/ripemd.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT md4.lo -MD -MP -MF ".deps/md4.Tpo" \
  -c -o md4.lo `test -f 'md4.c' || echo './'`md4.c; \
then mv -f ".deps/md4.Tpo" ".deps/md4.Plo"; \
else rm -f ".deps/md4.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT sha256_sha224.lo -MD -MP -MF ".deps/sha256_sha224.Tpo" \
  -c -o sha256_sha224.lo `test -f 'sha256_sha224.c' || echo './'`sha256_sha224.c; \
then mv -f ".deps/sha256_sha224.Tpo" ".deps/sha256_sha224.Plo"; \
else rm -f ".deps/sha256_sha224.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT sha512_sha384.lo -MD -MP -MF ".deps/sha512_sha384.Tpo" \
  -c -o sha512_sha384.lo `test -f 'sha512_sha384.c' || echo './'`sha512_sha384.c; \
then mv -f ".deps/sha512_sha384.Tpo" ".deps/sha512_sha384.Plo"; \
else rm -f ".deps/sha512_sha384.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT adler32.lo -MD -MP -MF ".deps/adler32.Tpo" \
  -c -o adler32.lo `test -f 'adler32.c' || echo './'`adler32.c; \
then mv -f ".deps/adler32.Tpo" ".deps/adler32.Plo"; \
else rm -f ".deps/adler32.Tpo"; exit 1; \
fi
if /bin/sh ../libtool --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT whirlpool.lo -MD -MP -MF ".deps/whirlpool.Tpo" \
  -c -o whirlpool.lo `test -f 'whirlpool.c' || echo './'`whirlpool.c; \
then mv -f ".deps/whirlpool.Tpo" ".deps/whirlpool.Plo"; \
else rm -f ".deps/whirlpool.Tpo"; exit 1; \
fi
/bin/sh ../libtool --silent --mode=link gcc  -O2   -o libmhash.la -rpath /usr/lib -version-info 2 -no-undefined -export-symbols ./libmhash.sym mhash.lo swap.lo bzero.lo crc32.lo md5.lo sha1.lo haval.lo tiger.lo tiger_sboxes.lo gosthash.lo keygen_hex.lo keygen_mcrypt.lo keygen_asis.lo keygen.lo keygen_s2k.lo ripemd.lo md4.lo sha256_sha224.lo sha512_sha384.lo adler32.lo whirlpool.lo  
make[2]: Leaving directory `/tmp/mhash-0.9.1/lib'
Making all in doc
make[2]: Entering directory `/tmp/mhash-0.9.1/doc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/tmp/mhash-0.9.1/doc'
Making all in src
make[2]: Entering directory `/tmp/mhash-0.9.1/src'
if gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT driver.o -MD -MP -MF ".deps/driver.Tpo" \
  -c -o driver.o `test -f 'driver.c' || echo './'`driver.c; \
then mv -f ".deps/driver.Tpo" ".deps/driver.Po"; \
else rm -f ".deps/driver.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT hmac_test.o -MD -MP -MF ".deps/hmac_test.Tpo" \
  -c -o hmac_test.o `test -f 'hmac_test.c' || echo './'`hmac_test.c; \
then mv -f ".deps/hmac_test.Tpo" ".deps/hmac_test.Po"; \
else rm -f ".deps/hmac_test.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT keygen_test.o -MD -MP -MF ".deps/keygen_test.Tpo" \
  -c -o keygen_test.o `test -f 'keygen_test.c' || echo './'`keygen_test.c; \
then mv -f ".deps/keygen_test.Tpo" ".deps/keygen_test.Po"; \
else rm -f ".deps/keygen_test.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT mhash_save_restore_test.o -MD -MP -MF ".deps/mhash_save_restore_test.Tpo" \
  -c -o mhash_save_restore_test.o `test -f 'mhash_save_restore_test.c' || echo './'`mhash_save_restore_test.c; \
then mv -f ".deps/mhash_save_restore_test.Tpo" ".deps/mhash_save_restore_test.Po"; \
else rm -f ".deps/mhash_save_restore_test.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -MT frag_test.o -MD -MP -MF ".deps/frag_test.Tpo" \
  -c -o frag_test.o `test -f 'frag_test.c' || echo './'`frag_test.c; \
then mv -f ".deps/frag_test.Tpo" ".deps/frag_test.Po"; \
else rm -f ".deps/frag_test.Tpo"; exit 1; \
fi
/bin/sh ../libtool --silent --mode=link gcc  -O2   -o driver  driver.o ../lib/libmhash.la 
/bin/sh ../libtool --silent --mode=link gcc  -O2   -o hmac_test  hmac_test.o ../lib/libmhash.la 
/bin/sh ../libtool --silent --mode=link gcc  -O2   -o keygen_test  keygen_test.o ../lib/libmhash.la 
/bin/sh ../libtool --silent --mode=link gcc  -O2   -o rest_test  mhash_save_restore_test.o ../lib/libmhash.la 
/bin/sh ../libtool --silent --mode=link gcc  -O2   -o frag_test  frag_test.o ../lib/libmhash.la 
make[2]: Leaving directory `/tmp/mhash-0.9.1/src'
make[2]: Entering directory `/tmp/mhash-0.9.1'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/tmp/mhash-0.9.1'
make[1]: Leaving directory `/tmp/mhash-0.9.1'
Making install in lib
make[1]: Entering directory `/tmp/mhash-0.9.1/lib'
make[2]: Entering directory `/tmp/mhash-0.9.1/lib'
/bin/sh ../mkinstalldirs /tmp/package-mhash/usr/lib
mkdir /tmp/package-mhash/usr
mkdir /tmp/package-mhash/usr/lib
 /bin/sh ../libtool --silent --mode=install /usr/bin/ginstall -c  libmhash.la /tmp/package-mhash/usr/lib/libmhash.la
/bin/sh ../mkinstalldirs /tmp/package-mhash/usr/include
mkdir /tmp/package-mhash/usr/include
 /usr/bin/ginstall -c -m 644 mhash.h /tmp/package-mhash/usr/include/mhash.h
make[2]: Leaving directory `/tmp/mhash-0.9.1/lib'
make[1]: Leaving directory `/tmp/mhash-0.9.1/lib'
Making install in doc
make[1]: Entering directory `/tmp/mhash-0.9.1/doc'
make[2]: Entering directory `/tmp/mhash-0.9.1/doc'
make[2]: Nothing to be done for `install-exec-am'.
/bin/sh ../mkinstalldirs /tmp/package-mhash/usr/man/man3
mkdir /tmp/package-mhash/usr/man
mkdir /tmp/package-mhash/usr/man/man3
 /usr/bin/ginstall -c -m 644 ././mhash.3 /tmp/package-mhash/usr/man/man3/mhash.3
make[2]: Leaving directory `/tmp/mhash-0.9.1/doc'
make[1]: Leaving directory `/tmp/mhash-0.9.1/doc'
Making install in src
make[1]: Entering directory `/tmp/mhash-0.9.1/src'
make[2]: Entering directory `/tmp/mhash-0.9.1/src'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/mhash-0.9.1/src'
make[1]: Leaving directory `/tmp/mhash-0.9.1/src'
make[1]: Entering directory `/tmp/mhash-0.9.1'
make[2]: Entering directory `/tmp/mhash-0.9.1'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/mhash-0.9.1'
make[1]: Leaving directory `/tmp/mhash-0.9.1'

Slackware package maker, version 2.1.

Searching for symbolic links:
usr/lib/libmhash.so.2 -> libmhash.so.2.0.0
usr/lib/libmhash.so -> libmhash.so.2.0.0

Making symbolic link creation script:
( cd usr/lib ; rm -rf libmhash.so.2 )
( cd usr/lib ; ln -sf libmhash.so.2.0.0 libmhash.so.2 )
( cd usr/lib ; rm -rf libmhash.so )
( cd usr/lib ; ln -sf libmhash.so.2.0.0 libmhash.so )

It is recommended that you make these lines your new installation script.

Would you like to make this stuff the install script for this package
and remove the symbolic links ([y]es, [n]o)? y


Removing symbolic links:
removed `./usr/lib/libmhash.so.2'
removed `./usr/lib/libmhash.so'

Creating your new ./install/doinst.sh...

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n


Creating tar file mhash-0.9.1-sparc-0.tar...

./
usr/
usr/lib/
usr/lib/libmhash.so.2.0.0
usr/lib/libmhash.la
usr/include/
usr/include/mhash.h
usr/man/
usr/man/man3/
usr/man/man3/mhash.3.gz
usr/doc/
usr/doc/mhash-0.9.1/
usr/doc/mhash-0.9.1/AUTHORS
usr/doc/mhash-0.9.1/COPYING
usr/doc/mhash-0.9.1/INSTALL
usr/doc/mhash-0.9.1/NEWS
usr/doc/mhash-0.9.1/README
usr/doc/mhash-0.9.1/THANKS
usr/doc/mhash-0.9.1/TODO
install/
install/slack-desc
install/doinst.sh

Gzipping mhash-0.9.1-sparc-0.tar...

Renaming mhash-0.9.1-sparc-0.tar.gz to mhash-0.9.1-sparc-0.tgz...

Moving mhash-0.9.1-sparc-0.tgz to .....

Package creation complete.