audiofile-0.2.6/ audiofile-0.2.6/README audiofile-0.2.6/stamp-h.in audiofile-0.2.6/AUTHORS audiofile-0.2.6/COPYING audiofile-0.2.6/ChangeLog audiofile-0.2.6/INSTALL audiofile-0.2.6/Makefile.am audiofile-0.2.6/Makefile.in audiofile-0.2.6/NEWS audiofile-0.2.6/TODO audiofile-0.2.6/aclocal.m4 audiofile-0.2.6/audiofile-config.in audiofile-0.2.6/audiofile.pc.in audiofile-0.2.6/audiofile.spec.in audiofile-0.2.6/config.guess audiofile-0.2.6/config.h.in audiofile-0.2.6/config.sub audiofile-0.2.6/configure audiofile-0.2.6/configure.in audiofile-0.2.6/depcomp audiofile-0.2.6/install-sh audiofile-0.2.6/ltmain.sh audiofile-0.2.6/missing audiofile-0.2.6/mkinstalldirs audiofile-0.2.6/ACKNOWLEDGEMENTS audiofile-0.2.6/NOTES audiofile-0.2.6/COPYING.GPL audiofile-0.2.6/audiofile.m4 audiofile-0.2.6/libaudiofile/ audiofile-0.2.6/libaudiofile/audiofile.h audiofile-0.2.6/libaudiofile/aupvlist.h audiofile-0.2.6/libaudiofile/af_vfs.h audiofile-0.2.6/libaudiofile/Makefile.am audiofile-0.2.6/libaudiofile/Makefile.in audiofile-0.2.6/libaudiofile/openclose.c audiofile-0.2.6/libaudiofile/setup.c audiofile-0.2.6/libaudiofile/format.c audiofile-0.2.6/libaudiofile/data.c audiofile-0.2.6/libaudiofile/pcm.c audiofile-0.2.6/libaudiofile/error.c audiofile-0.2.6/libaudiofile/byteorder.c audiofile-0.2.6/libaudiofile/af_vfs.c audiofile-0.2.6/libaudiofile/util.c audiofile-0.2.6/libaudiofile/debug.c audiofile-0.2.6/libaudiofile/aupv.c audiofile-0.2.6/libaudiofile/units.c audiofile-0.2.6/libaudiofile/compression.c audiofile-0.2.6/libaudiofile/aes.c audiofile-0.2.6/libaudiofile/instrument.c audiofile-0.2.6/libaudiofile/loop.c audiofile-0.2.6/libaudiofile/marker.c audiofile-0.2.6/libaudiofile/misc.c audiofile-0.2.6/libaudiofile/track.c audiofile-0.2.6/libaudiofile/query.c audiofile-0.2.6/libaudiofile/raw.c audiofile-0.2.6/libaudiofile/raw.h audiofile-0.2.6/libaudiofile/aiff.c audiofile-0.2.6/libaudiofile/aiffwrite.c audiofile-0.2.6/libaudiofile/extended.c audiofile-0.2.6/libaudiofile/aiff.h audiofile-0.2.6/libaudiofile/next.c audiofile-0.2.6/libaudiofile/nextwrite.c audiofile-0.2.6/libaudiofile/next.h audiofile-0.2.6/libaudiofile/wave.c audiofile-0.2.6/libaudiofile/wavewrite.c audiofile-0.2.6/libaudiofile/wave.h audiofile-0.2.6/libaudiofile/ircam.c audiofile-0.2.6/libaudiofile/ircamwrite.c audiofile-0.2.6/libaudiofile/ircam.h audiofile-0.2.6/libaudiofile/avr.c audiofile-0.2.6/libaudiofile/avrwrite.c audiofile-0.2.6/libaudiofile/avr.h audiofile-0.2.6/libaudiofile/iff.c audiofile-0.2.6/libaudiofile/iffwrite.c audiofile-0.2.6/libaudiofile/iff.h audiofile-0.2.6/libaudiofile/nist.c audiofile-0.2.6/libaudiofile/nistwrite.c audiofile-0.2.6/libaudiofile/nist.h audiofile-0.2.6/libaudiofile/g711.c audiofile-0.2.6/libaudiofile/g711.h audiofile-0.2.6/libaudiofile/afinternal.h audiofile-0.2.6/libaudiofile/aupvinternal.h audiofile-0.2.6/libaudiofile/byteorder.h audiofile-0.2.6/libaudiofile/compression.h audiofile-0.2.6/libaudiofile/error.h audiofile-0.2.6/libaudiofile/extended.h audiofile-0.2.6/libaudiofile/instrument.h audiofile-0.2.6/libaudiofile/marker.h audiofile-0.2.6/libaudiofile/pcm.h audiofile-0.2.6/libaudiofile/setup.h audiofile-0.2.6/libaudiofile/track.h audiofile-0.2.6/libaudiofile/units.h audiofile-0.2.6/libaudiofile/print.h audiofile-0.2.6/libaudiofile/util.h audiofile-0.2.6/libaudiofile/debug.h audiofile-0.2.6/libaudiofile/modules.c audiofile-0.2.6/libaudiofile/modules.h audiofile-0.2.6/libaudiofile/audiofile.exports audiofile-0.2.6/libaudiofile/modules/ audiofile-0.2.6/libaudiofile/modules/Makefile.am audiofile-0.2.6/libaudiofile/modules/Makefile.in audiofile-0.2.6/libaudiofile/modules/g711.c audiofile-0.2.6/libaudiofile/modules/g711.h audiofile-0.2.6/libaudiofile/modules/pcm.c audiofile-0.2.6/libaudiofile/modules/pcm.h audiofile-0.2.6/libaudiofile/modules/msadpcm.c audiofile-0.2.6/libaudiofile/modules/msadpcm.h audiofile-0.2.6/libaudiofile/modules/ima.c audiofile-0.2.6/libaudiofile/modules/ima.h audiofile-0.2.6/libaudiofile/modules/adpcm.c audiofile-0.2.6/libaudiofile/modules/adpcm.h audiofile-0.2.6/libaudiofile/modules/rebuffer.c audiofile-0.2.6/libaudiofile/modules/rebuffer.h audiofile-0.2.6/libaudiofile/modules/rebuffer.template audiofile-0.2.6/sfcommands/ audiofile-0.2.6/sfcommands/README audiofile-0.2.6/sfcommands/Makefile.am audiofile-0.2.6/sfcommands/Makefile.in audiofile-0.2.6/sfcommands/sfconvert.c audiofile-0.2.6/sfcommands/printinfo.c audiofile-0.2.6/sfcommands/sfinfo.c audiofile-0.2.6/test/ audiofile-0.2.6/test/Makefile.am audiofile-0.2.6/test/Makefile.in audiofile-0.2.6/test/error.c audiofile-0.2.6/test/floatto24.c audiofile-0.2.6/test/instparamtest.c audiofile-0.2.6/test/instparamwrite.c audiofile-0.2.6/test/loop.c audiofile-0.2.6/test/miscread.c audiofile-0.2.6/test/miscwrite.c audiofile-0.2.6/test/pipe.c audiofile-0.2.6/test/printmarkers.c audiofile-0.2.6/test/query2.c audiofile-0.2.6/test/seek.c audiofile-0.2.6/test/sixteen-to-eight.c audiofile-0.2.6/test/testaupv.c audiofile-0.2.6/test/testchannelmatrix.c audiofile-0.2.6/test/testfloat.c audiofile-0.2.6/test/testmarkers.c audiofile-0.2.6/test/transparency.c audiofile-0.2.6/test/twentyfour.c audiofile-0.2.6/test/twentyfour2.c audiofile-0.2.6/test/writeaiff.c audiofile-0.2.6/test/writealaw.c audiofile-0.2.6/test/writeavr.c audiofile-0.2.6/test/writeiff.c audiofile-0.2.6/test/writeircam.c audiofile-0.2.6/test/writenext.c audiofile-0.2.6/test/writenist.c audiofile-0.2.6/test/writeraw.c audiofile-0.2.6/test/writeulaw.c audiofile-0.2.6/test/writewave.c audiofile-0.2.6/test/transparency.sh audiofile-0.2.6/test/misc.sh audiofile-0.2.6/test/pipe.sh audiofile-0.2.6/examples/ audiofile-0.2.6/examples/Makefile.am audiofile-0.2.6/examples/Makefile.in audiofile-0.2.6/examples/adddcoffset.c audiofile-0.2.6/examples/irixread.c audiofile-0.2.6/examples/sgi.c audiofile-0.2.6/examples/sgi.h audiofile-0.2.6/examples/irixtestloop.c audiofile-0.2.6/examples/linuxtest.c audiofile-0.2.6/examples/osxplay.c audiofile-0.2.6/examples/power.c audiofile-0.2.6/docs/ audiofile-0.2.6/docs/Makefile.am audiofile-0.2.6/docs/Makefile.in audiofile-0.2.6/docs/afCloseFile audiofile-0.2.6/docs/afGetFrameSize audiofile-0.2.6/docs/afGetTrackBytes audiofile-0.2.6/docs/afIntro audiofile-0.2.6/docs/afNewFileSetup audiofile-0.2.6/docs/afOpenFile audiofile-0.2.6/docs/afQuery audiofile-0.2.6/docs/afReadFrames audiofile-0.2.6/docs/afReadMisc audiofile-0.2.6/docs/afSeekFrame audiofile-0.2.6/docs/afSetErrorHandler audiofile-0.2.6/docs/afSetVirtualByteOrder audiofile-0.2.6/docs/afWriteFrames audiofile-0.2.6/docs/sfconvert audiofile-0.2.6/docs/sfinfo audiofile-0.2.6/win32/ audiofile-0.2.6/win32/Makefile.am audiofile-0.2.6/win32/Makefile.in audiofile-0.2.6/win32/all.dsp audiofile-0.2.6/win32/all.dsw audiofile-0.2.6/win32/audiofile.def audiofile-0.2.6/win32/build_all.bat audiofile-0.2.6/win32/clean_all.bat audiofile-0.2.6/win32/clean_dist.bat audiofile-0.2.6/win32/config.h audiofile-0.2.6/win32/dynamiclib.dep audiofile-0.2.6/win32/dynamiclib.dsp audiofile-0.2.6/win32/dynamiclib.mak audiofile-0.2.6/win32/dynmodules.dep audiofile-0.2.6/win32/dynmodules.dsp audiofile-0.2.6/win32/dynmodules.mak audiofile-0.2.6/win32/lib.dsw audiofile-0.2.6/win32/modules.dep audiofile-0.2.6/win32/modules.dsp audiofile-0.2.6/win32/modules.mak audiofile-0.2.6/win32/prebuild.bat audiofile-0.2.6/win32/README.win32 audiofile-0.2.6/win32/sfcommands.dsp audiofile-0.2.6/win32/sfconvert.dep audiofile-0.2.6/win32/sfconvert.dsp audiofile-0.2.6/win32/sfconvert.mak audiofile-0.2.6/win32/sfinfo.dep audiofile-0.2.6/win32/sfinfo.dsp audiofile-0.2.6/win32/sfinfo.mak audiofile-0.2.6/win32/staticlib.dep audiofile-0.2.6/win32/staticlib.dsp audiofile-0.2.6/win32/staticlib.mak audiofile-0.2.6/audiofile.spec checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking for sparc-splack-linux-gcc... sparc-splack-linux-gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether sparc-splack-linux-gcc accepts -g... yes checking for style of include used by make... GNU checking dependency style of sparc-splack-linux-gcc... gcc3 checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether make sets ${MAKE}... (cached) yes checking build system type... sparc-splack-linux-gnu checking host system type... sparc-splack-linux-gnu checking for ld used by GCC... /usr/sparc-splack-linux/bin/ld checking if the linker (/usr/sparc-splack-linux/bin/ld) is GNU ld... yes checking for /usr/sparc-splack-linux/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognise dependant libraries... pass_all checking command to parse nm output... ok checking how to run the C preprocessor... sparc-splack-linux-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for sparc-splack-linux-ranlib... no checking for ranlib... ranlib checking for sparc-splack-linux-strip... no checking for strip... strip checking for objdir... .libs checking for sparc-splack-linux-gcc option to produce PIC... -fPIC checking if sparc-splack-linux-gcc PIC flag -fPIC works... yes checking if sparc-splack-linux-gcc static flag -static works... yes checking if sparc-splack-linux-gcc supports -c -o file.o... yes checking if sparc-splack-linux-gcc supports -c -o file.lo... yes checking if sparc-splack-linux-gcc supports -fno-rtti -fno-exceptions... yes checking whether the linker (/usr/sparc-splack-linux/bin/ld) supports shared libraries... yes checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether -lc should be explicitly linked in... no creating libtool checking for ldexp in -lm... yes checking for alOpenPort in -laudio... no checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for unistd.h... (cached) yes checking for inttypes.h... (cached) yes checking for sparc-splack-linux-gcc option to accept ANSI C... none needed checking for an ANSI C-conforming const... yes checking whether byte ordering is bigendian... yes checking for off_t... yes checking for size_t... yes checking for off_t... (cached) yes checking size of off_t... 4 checking for size_t... (cached) yes checking size of size_t... 4 checking for long... yes checking size of long... 4 checking for u_int8_t... yes checking for u_int16_t... yes checking for u_int32_t... yes checking for int8_t... yes checking for int16_t... yes checking for int32_t... yes checking whether sparc-splack-linux-gcc needs -traditional... no checking for working memcmp... yes checking for strdup... yes checking for platform specific tests to compile... linux configure: creating ./config.status config.status: creating audiofile.spec config.status: creating audiofile.pc config.status: creating sfcommands/Makefile config.status: creating test/Makefile config.status: creating examples/Makefile config.status: creating libaudiofile/Makefile config.status: creating libaudiofile/modules/Makefile config.status: creating docs/Makefile config.status: creating win32/Makefile config.status: creating Makefile config.status: creating audiofile-config config.status: creating config.h config.status: executing default-1 commands config.status: executing default commands cd . \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ /bin/sh ./config.status config.status: creating config.h config.status: config.h is unchanged config.status: executing default-1 commands config.status: executing default commands make all-recursive make[1]: Entering directory `/tmp/audiofile-0.2.6' Making all in libaudiofile make[2]: Entering directory `/tmp/audiofile-0.2.6/libaudiofile' Making all in modules make[3]: Entering directory `/tmp/audiofile-0.2.6/libaudiofile/modules' source='g711.c' object='g711.lo' libtool=yes \ depfile='.deps/g711.Plo' tmpdepfile='.deps/g711.TPlo' \ depmode=gcc3 /bin/sh ../../depcomp \ /bin/sh ../../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c -o g711.lo `test -f g711.c || echo './'`g711.c mkdir .libs sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c g711.c -MT g711.lo -MD -MP -MF .deps/g711.TPlo -fPIC -DPIC -o .libs/g711.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c g711.c -MT g711.lo -MD -MP -MF .deps/g711.TPlo -o g711.o >/dev/null 2>&1 mv -f .libs/g711.lo g711.lo source='pcm.c' object='pcm.lo' libtool=yes \ depfile='.deps/pcm.Plo' tmpdepfile='.deps/pcm.TPlo' \ depmode=gcc3 /bin/sh ../../depcomp \ /bin/sh ../../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c -o pcm.lo `test -f pcm.c || echo './'`pcm.c rm -f .libs/pcm.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c pcm.c -MT pcm.lo -MD -MP -MF .deps/pcm.TPlo -fPIC -DPIC -o .libs/pcm.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c pcm.c -MT pcm.lo -MD -MP -MF .deps/pcm.TPlo -o pcm.o >/dev/null 2>&1 mv -f .libs/pcm.lo pcm.lo source='msadpcm.c' object='msadpcm.lo' libtool=yes \ depfile='.deps/msadpcm.Plo' tmpdepfile='.deps/msadpcm.TPlo' \ depmode=gcc3 /bin/sh ../../depcomp \ /bin/sh ../../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c -o msadpcm.lo `test -f msadpcm.c || echo './'`msadpcm.c rm -f .libs/msadpcm.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c msadpcm.c -MT msadpcm.lo -MD -MP -MF .deps/msadpcm.TPlo -fPIC -DPIC -o .libs/msadpcm.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c msadpcm.c -MT msadpcm.lo -MD -MP -MF .deps/msadpcm.TPlo -o msadpcm.o >/dev/null 2>&1 mv -f .libs/msadpcm.lo msadpcm.lo source='ima.c' object='ima.lo' libtool=yes \ depfile='.deps/ima.Plo' tmpdepfile='.deps/ima.TPlo' \ depmode=gcc3 /bin/sh ../../depcomp \ /bin/sh ../../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c -o ima.lo `test -f ima.c || echo './'`ima.c rm -f .libs/ima.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c ima.c -MT ima.lo -MD -MP -MF .deps/ima.TPlo -fPIC -DPIC -o .libs/ima.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c ima.c -MT ima.lo -MD -MP -MF .deps/ima.TPlo -o ima.o >/dev/null 2>&1 mv -f .libs/ima.lo ima.lo source='adpcm.c' object='adpcm.lo' libtool=yes \ depfile='.deps/adpcm.Plo' tmpdepfile='.deps/adpcm.TPlo' \ depmode=gcc3 /bin/sh ../../depcomp \ /bin/sh ../../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c -o adpcm.lo `test -f adpcm.c || echo './'`adpcm.c rm -f .libs/adpcm.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c adpcm.c -MT adpcm.lo -MD -MP -MF .deps/adpcm.TPlo -fPIC -DPIC -o .libs/adpcm.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c adpcm.c -MT adpcm.lo -MD -MP -MF .deps/adpcm.TPlo -o adpcm.o >/dev/null 2>&1 mv -f .libs/adpcm.lo adpcm.lo source='rebuffer.c' object='rebuffer.lo' libtool=yes \ depfile='.deps/rebuffer.Plo' tmpdepfile='.deps/rebuffer.TPlo' \ depmode=gcc3 /bin/sh ../../depcomp \ /bin/sh ../../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c -o rebuffer.lo `test -f rebuffer.c || echo './'`rebuffer.c rm -f .libs/rebuffer.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c rebuffer.c -MT rebuffer.lo -MD -MP -MF .deps/rebuffer.TPlo -fPIC -DPIC -o .libs/rebuffer.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -DNDEBUG -O2 -c rebuffer.c -MT rebuffer.lo -MD -MP -MF .deps/rebuffer.TPlo -o rebuffer.o >/dev/null 2>&1 mv -f .libs/rebuffer.lo rebuffer.lo /bin/sh ../../libtool --mode=link sparc-splack-linux-gcc -DNDEBUG -O2 -o libmodules.la g711.lo pcm.lo msadpcm.lo ima.lo adpcm.lo rebuffer.lo -lm rm -fr .libs/libmodules.la .libs/libmodules.* .libs/libmodules.* ar cru .libs/libmodules.al g711.lo pcm.lo msadpcm.lo ima.lo adpcm.lo rebuffer.lo ranlib .libs/libmodules.al creating libmodules.la (cd .libs && rm -f libmodules.la && ln -s ../libmodules.la libmodules.la) make[3]: Leaving directory `/tmp/audiofile-0.2.6/libaudiofile/modules' make[3]: Entering directory `/tmp/audiofile-0.2.6/libaudiofile' source='openclose.c' object='openclose.lo' libtool=yes \ depfile='.deps/openclose.Plo' tmpdepfile='.deps/openclose.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o openclose.lo `test -f openclose.c || echo './'`openclose.c mkdir .libs sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c openclose.c -MT openclose.lo -MD -MP -MF .deps/openclose.TPlo -fPIC -DPIC -o .libs/openclose.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c openclose.c -MT openclose.lo -MD -MP -MF .deps/openclose.TPlo -o openclose.o >/dev/null 2>&1 mv -f .libs/openclose.lo openclose.lo source='setup.c' object='setup.lo' libtool=yes \ depfile='.deps/setup.Plo' tmpdepfile='.deps/setup.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o setup.lo `test -f setup.c || echo './'`setup.c rm -f .libs/setup.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c setup.c -MT setup.lo -MD -MP -MF .deps/setup.TPlo -fPIC -DPIC -o .libs/setup.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c setup.c -MT setup.lo -MD -MP -MF .deps/setup.TPlo -o setup.o >/dev/null 2>&1 mv -f .libs/setup.lo setup.lo source='format.c' object='format.lo' libtool=yes \ depfile='.deps/format.Plo' tmpdepfile='.deps/format.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o format.lo `test -f format.c || echo './'`format.c rm -f .libs/format.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c format.c -MT format.lo -MD -MP -MF .deps/format.TPlo -fPIC -DPIC -o .libs/format.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c format.c -MT format.lo -MD -MP -MF .deps/format.TPlo -o format.o >/dev/null 2>&1 mv -f .libs/format.lo format.lo source='data.c' object='data.lo' libtool=yes \ depfile='.deps/data.Plo' tmpdepfile='.deps/data.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o data.lo `test -f data.c || echo './'`data.c rm -f .libs/data.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c data.c -MT data.lo -MD -MP -MF .deps/data.TPlo -fPIC -DPIC -o .libs/data.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c data.c -MT data.lo -MD -MP -MF .deps/data.TPlo -o data.o >/dev/null 2>&1 mv -f .libs/data.lo data.lo source='pcm.c' object='pcm.lo' libtool=yes \ depfile='.deps/pcm.Plo' tmpdepfile='.deps/pcm.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o pcm.lo `test -f pcm.c || echo './'`pcm.c rm -f .libs/pcm.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c pcm.c -MT pcm.lo -MD -MP -MF .deps/pcm.TPlo -fPIC -DPIC -o .libs/pcm.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c pcm.c -MT pcm.lo -MD -MP -MF .deps/pcm.TPlo -o pcm.o >/dev/null 2>&1 mv -f .libs/pcm.lo pcm.lo source='error.c' object='error.lo' libtool=yes \ depfile='.deps/error.Plo' tmpdepfile='.deps/error.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o error.lo `test -f error.c || echo './'`error.c rm -f .libs/error.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c error.c -MT error.lo -MD -MP -MF .deps/error.TPlo -fPIC -DPIC -o .libs/error.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c error.c -MT error.lo -MD -MP -MF .deps/error.TPlo -o error.o >/dev/null 2>&1 mv -f .libs/error.lo error.lo source='byteorder.c' object='byteorder.lo' libtool=yes \ depfile='.deps/byteorder.Plo' tmpdepfile='.deps/byteorder.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o byteorder.lo `test -f byteorder.c || echo './'`byteorder.c rm -f .libs/byteorder.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c byteorder.c -MT byteorder.lo -MD -MP -MF .deps/byteorder.TPlo -fPIC -DPIC -o .libs/byteorder.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c byteorder.c -MT byteorder.lo -MD -MP -MF .deps/byteorder.TPlo -o byteorder.o >/dev/null 2>&1 mv -f .libs/byteorder.lo byteorder.lo source='af_vfs.c' object='af_vfs.lo' libtool=yes \ depfile='.deps/af_vfs.Plo' tmpdepfile='.deps/af_vfs.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o af_vfs.lo `test -f af_vfs.c || echo './'`af_vfs.c rm -f .libs/af_vfs.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c af_vfs.c -MT af_vfs.lo -MD -MP -MF .deps/af_vfs.TPlo -fPIC -DPIC -o .libs/af_vfs.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c af_vfs.c -MT af_vfs.lo -MD -MP -MF .deps/af_vfs.TPlo -o af_vfs.o >/dev/null 2>&1 mv -f .libs/af_vfs.lo af_vfs.lo source='util.c' object='util.lo' libtool=yes \ depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o util.lo `test -f util.c || echo './'`util.c rm -f .libs/util.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o .libs/util.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -o util.o >/dev/null 2>&1 mv -f .libs/util.lo util.lo source='debug.c' object='debug.lo' libtool=yes \ depfile='.deps/debug.Plo' tmpdepfile='.deps/debug.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o debug.lo `test -f debug.c || echo './'`debug.c rm -f .libs/debug.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c debug.c -MT debug.lo -MD -MP -MF .deps/debug.TPlo -fPIC -DPIC -o .libs/debug.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c debug.c -MT debug.lo -MD -MP -MF .deps/debug.TPlo -o debug.o >/dev/null 2>&1 mv -f .libs/debug.lo debug.lo source='aupv.c' object='aupv.lo' libtool=yes \ depfile='.deps/aupv.Plo' tmpdepfile='.deps/aupv.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o aupv.lo `test -f aupv.c || echo './'`aupv.c rm -f .libs/aupv.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c aupv.c -MT aupv.lo -MD -MP -MF .deps/aupv.TPlo -fPIC -DPIC -o .libs/aupv.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c aupv.c -MT aupv.lo -MD -MP -MF .deps/aupv.TPlo -o aupv.o >/dev/null 2>&1 mv -f .libs/aupv.lo aupv.lo source='units.c' object='units.lo' libtool=yes \ depfile='.deps/units.Plo' tmpdepfile='.deps/units.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o units.lo `test -f units.c || echo './'`units.c rm -f .libs/units.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c units.c -MT units.lo -MD -MP -MF .deps/units.TPlo -fPIC -DPIC -o .libs/units.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c units.c -MT units.lo -MD -MP -MF .deps/units.TPlo -o units.o >/dev/null 2>&1 mv -f .libs/units.lo units.lo source='compression.c' object='compression.lo' libtool=yes \ depfile='.deps/compression.Plo' tmpdepfile='.deps/compression.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o compression.lo `test -f compression.c || echo './'`compression.c rm -f .libs/compression.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c compression.c -MT compression.lo -MD -MP -MF .deps/compression.TPlo -fPIC -DPIC -o .libs/compression.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c compression.c -MT compression.lo -MD -MP -MF .deps/compression.TPlo -o compression.o >/dev/null 2>&1 mv -f .libs/compression.lo compression.lo source='aes.c' object='aes.lo' libtool=yes \ depfile='.deps/aes.Plo' tmpdepfile='.deps/aes.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o aes.lo `test -f aes.c || echo './'`aes.c rm -f .libs/aes.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c aes.c -MT aes.lo -MD -MP -MF .deps/aes.TPlo -fPIC -DPIC -o .libs/aes.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c aes.c -MT aes.lo -MD -MP -MF .deps/aes.TPlo -o aes.o >/dev/null 2>&1 mv -f .libs/aes.lo aes.lo source='instrument.c' object='instrument.lo' libtool=yes \ depfile='.deps/instrument.Plo' tmpdepfile='.deps/instrument.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o instrument.lo `test -f instrument.c || echo './'`instrument.c rm -f .libs/instrument.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c instrument.c -MT instrument.lo -MD -MP -MF .deps/instrument.TPlo -fPIC -DPIC -o .libs/instrument.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c instrument.c -MT instrument.lo -MD -MP -MF .deps/instrument.TPlo -o instrument.o >/dev/null 2>&1 mv -f .libs/instrument.lo instrument.lo source='loop.c' object='loop.lo' libtool=yes \ depfile='.deps/loop.Plo' tmpdepfile='.deps/loop.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o loop.lo `test -f loop.c || echo './'`loop.c rm -f .libs/loop.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c loop.c -MT loop.lo -MD -MP -MF .deps/loop.TPlo -fPIC -DPIC -o .libs/loop.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c loop.c -MT loop.lo -MD -MP -MF .deps/loop.TPlo -o loop.o >/dev/null 2>&1 mv -f .libs/loop.lo loop.lo source='marker.c' object='marker.lo' libtool=yes \ depfile='.deps/marker.Plo' tmpdepfile='.deps/marker.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o marker.lo `test -f marker.c || echo './'`marker.c rm -f .libs/marker.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c marker.c -MT marker.lo -MD -MP -MF .deps/marker.TPlo -fPIC -DPIC -o .libs/marker.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c marker.c -MT marker.lo -MD -MP -MF .deps/marker.TPlo -o marker.o >/dev/null 2>&1 mv -f .libs/marker.lo marker.lo source='misc.c' object='misc.lo' libtool=yes \ depfile='.deps/misc.Plo' tmpdepfile='.deps/misc.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o misc.lo `test -f misc.c || echo './'`misc.c rm -f .libs/misc.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c misc.c -MT misc.lo -MD -MP -MF .deps/misc.TPlo -fPIC -DPIC -o .libs/misc.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c misc.c -MT misc.lo -MD -MP -MF .deps/misc.TPlo -o misc.o >/dev/null 2>&1 mv -f .libs/misc.lo misc.lo source='track.c' object='track.lo' libtool=yes \ depfile='.deps/track.Plo' tmpdepfile='.deps/track.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o track.lo `test -f track.c || echo './'`track.c rm -f .libs/track.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c track.c -MT track.lo -MD -MP -MF .deps/track.TPlo -fPIC -DPIC -o .libs/track.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c track.c -MT track.lo -MD -MP -MF .deps/track.TPlo -o track.o >/dev/null 2>&1 mv -f .libs/track.lo track.lo source='query.c' object='query.lo' libtool=yes \ depfile='.deps/query.Plo' tmpdepfile='.deps/query.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o query.lo `test -f query.c || echo './'`query.c rm -f .libs/query.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c query.c -MT query.lo -MD -MP -MF .deps/query.TPlo -fPIC -DPIC -o .libs/query.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c query.c -MT query.lo -MD -MP -MF .deps/query.TPlo -o query.o >/dev/null 2>&1 mv -f .libs/query.lo query.lo source='raw.c' object='raw.lo' libtool=yes \ depfile='.deps/raw.Plo' tmpdepfile='.deps/raw.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o raw.lo `test -f raw.c || echo './'`raw.c rm -f .libs/raw.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c raw.c -MT raw.lo -MD -MP -MF .deps/raw.TPlo -fPIC -DPIC -o .libs/raw.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c raw.c -MT raw.lo -MD -MP -MF .deps/raw.TPlo -o raw.o >/dev/null 2>&1 mv -f .libs/raw.lo raw.lo source='aiff.c' object='aiff.lo' libtool=yes \ depfile='.deps/aiff.Plo' tmpdepfile='.deps/aiff.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o aiff.lo `test -f aiff.c || echo './'`aiff.c rm -f .libs/aiff.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c aiff.c -MT aiff.lo -MD -MP -MF .deps/aiff.TPlo -fPIC -DPIC -o .libs/aiff.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c aiff.c -MT aiff.lo -MD -MP -MF .deps/aiff.TPlo -o aiff.o >/dev/null 2>&1 mv -f .libs/aiff.lo aiff.lo source='aiffwrite.c' object='aiffwrite.lo' libtool=yes \ depfile='.deps/aiffwrite.Plo' tmpdepfile='.deps/aiffwrite.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o aiffwrite.lo `test -f aiffwrite.c || echo './'`aiffwrite.c rm -f .libs/aiffwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c aiffwrite.c -MT aiffwrite.lo -MD -MP -MF .deps/aiffwrite.TPlo -fPIC -DPIC -o .libs/aiffwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c aiffwrite.c -MT aiffwrite.lo -MD -MP -MF .deps/aiffwrite.TPlo -o aiffwrite.o >/dev/null 2>&1 mv -f .libs/aiffwrite.lo aiffwrite.lo source='extended.c' object='extended.lo' libtool=yes \ depfile='.deps/extended.Plo' tmpdepfile='.deps/extended.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o extended.lo `test -f extended.c || echo './'`extended.c rm -f .libs/extended.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c extended.c -MT extended.lo -MD -MP -MF .deps/extended.TPlo -fPIC -DPIC -o .libs/extended.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c extended.c -MT extended.lo -MD -MP -MF .deps/extended.TPlo -o extended.o >/dev/null 2>&1 mv -f .libs/extended.lo extended.lo source='next.c' object='next.lo' libtool=yes \ depfile='.deps/next.Plo' tmpdepfile='.deps/next.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o next.lo `test -f next.c || echo './'`next.c rm -f .libs/next.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c next.c -MT next.lo -MD -MP -MF .deps/next.TPlo -fPIC -DPIC -o .libs/next.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c next.c -MT next.lo -MD -MP -MF .deps/next.TPlo -o next.o >/dev/null 2>&1 mv -f .libs/next.lo next.lo source='nextwrite.c' object='nextwrite.lo' libtool=yes \ depfile='.deps/nextwrite.Plo' tmpdepfile='.deps/nextwrite.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o nextwrite.lo `test -f nextwrite.c || echo './'`nextwrite.c rm -f .libs/nextwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c nextwrite.c -MT nextwrite.lo -MD -MP -MF .deps/nextwrite.TPlo -fPIC -DPIC -o .libs/nextwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c nextwrite.c -MT nextwrite.lo -MD -MP -MF .deps/nextwrite.TPlo -o nextwrite.o >/dev/null 2>&1 mv -f .libs/nextwrite.lo nextwrite.lo source='wave.c' object='wave.lo' libtool=yes \ depfile='.deps/wave.Plo' tmpdepfile='.deps/wave.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o wave.lo `test -f wave.c || echo './'`wave.c rm -f .libs/wave.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c wave.c -MT wave.lo -MD -MP -MF .deps/wave.TPlo -fPIC -DPIC -o .libs/wave.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c wave.c -MT wave.lo -MD -MP -MF .deps/wave.TPlo -o wave.o >/dev/null 2>&1 mv -f .libs/wave.lo wave.lo source='wavewrite.c' object='wavewrite.lo' libtool=yes \ depfile='.deps/wavewrite.Plo' tmpdepfile='.deps/wavewrite.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o wavewrite.lo `test -f wavewrite.c || echo './'`wavewrite.c rm -f .libs/wavewrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c wavewrite.c -MT wavewrite.lo -MD -MP -MF .deps/wavewrite.TPlo -fPIC -DPIC -o .libs/wavewrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c wavewrite.c -MT wavewrite.lo -MD -MP -MF .deps/wavewrite.TPlo -o wavewrite.o >/dev/null 2>&1 mv -f .libs/wavewrite.lo wavewrite.lo source='ircam.c' object='ircam.lo' libtool=yes \ depfile='.deps/ircam.Plo' tmpdepfile='.deps/ircam.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o ircam.lo `test -f ircam.c || echo './'`ircam.c rm -f .libs/ircam.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c ircam.c -MT ircam.lo -MD -MP -MF .deps/ircam.TPlo -fPIC -DPIC -o .libs/ircam.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c ircam.c -MT ircam.lo -MD -MP -MF .deps/ircam.TPlo -o ircam.o >/dev/null 2>&1 mv -f .libs/ircam.lo ircam.lo source='ircamwrite.c' object='ircamwrite.lo' libtool=yes \ depfile='.deps/ircamwrite.Plo' tmpdepfile='.deps/ircamwrite.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o ircamwrite.lo `test -f ircamwrite.c || echo './'`ircamwrite.c rm -f .libs/ircamwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c ircamwrite.c -MT ircamwrite.lo -MD -MP -MF .deps/ircamwrite.TPlo -fPIC -DPIC -o .libs/ircamwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c ircamwrite.c -MT ircamwrite.lo -MD -MP -MF .deps/ircamwrite.TPlo -o ircamwrite.o >/dev/null 2>&1 mv -f .libs/ircamwrite.lo ircamwrite.lo source='avr.c' object='avr.lo' libtool=yes \ depfile='.deps/avr.Plo' tmpdepfile='.deps/avr.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o avr.lo `test -f avr.c || echo './'`avr.c rm -f .libs/avr.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c avr.c -MT avr.lo -MD -MP -MF .deps/avr.TPlo -fPIC -DPIC -o .libs/avr.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c avr.c -MT avr.lo -MD -MP -MF .deps/avr.TPlo -o avr.o >/dev/null 2>&1 mv -f .libs/avr.lo avr.lo source='avrwrite.c' object='avrwrite.lo' libtool=yes \ depfile='.deps/avrwrite.Plo' tmpdepfile='.deps/avrwrite.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o avrwrite.lo `test -f avrwrite.c || echo './'`avrwrite.c rm -f .libs/avrwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c avrwrite.c -MT avrwrite.lo -MD -MP -MF .deps/avrwrite.TPlo -fPIC -DPIC -o .libs/avrwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c avrwrite.c -MT avrwrite.lo -MD -MP -MF .deps/avrwrite.TPlo -o avrwrite.o >/dev/null 2>&1 mv -f .libs/avrwrite.lo avrwrite.lo source='iff.c' object='iff.lo' libtool=yes \ depfile='.deps/iff.Plo' tmpdepfile='.deps/iff.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o iff.lo `test -f iff.c || echo './'`iff.c rm -f .libs/iff.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c iff.c -MT iff.lo -MD -MP -MF .deps/iff.TPlo -fPIC -DPIC -o .libs/iff.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c iff.c -MT iff.lo -MD -MP -MF .deps/iff.TPlo -o iff.o >/dev/null 2>&1 mv -f .libs/iff.lo iff.lo source='iffwrite.c' object='iffwrite.lo' libtool=yes \ depfile='.deps/iffwrite.Plo' tmpdepfile='.deps/iffwrite.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o iffwrite.lo `test -f iffwrite.c || echo './'`iffwrite.c rm -f .libs/iffwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c iffwrite.c -MT iffwrite.lo -MD -MP -MF .deps/iffwrite.TPlo -fPIC -DPIC -o .libs/iffwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c iffwrite.c -MT iffwrite.lo -MD -MP -MF .deps/iffwrite.TPlo -o iffwrite.o >/dev/null 2>&1 mv -f .libs/iffwrite.lo iffwrite.lo source='nist.c' object='nist.lo' libtool=yes \ depfile='.deps/nist.Plo' tmpdepfile='.deps/nist.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o nist.lo `test -f nist.c || echo './'`nist.c rm -f .libs/nist.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c nist.c -MT nist.lo -MD -MP -MF .deps/nist.TPlo -fPIC -DPIC -o .libs/nist.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c nist.c -MT nist.lo -MD -MP -MF .deps/nist.TPlo -o nist.o >/dev/null 2>&1 mv -f .libs/nist.lo nist.lo source='nistwrite.c' object='nistwrite.lo' libtool=yes \ depfile='.deps/nistwrite.Plo' tmpdepfile='.deps/nistwrite.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o nistwrite.lo `test -f nistwrite.c || echo './'`nistwrite.c rm -f .libs/nistwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c nistwrite.c -MT nistwrite.lo -MD -MP -MF .deps/nistwrite.TPlo -fPIC -DPIC -o .libs/nistwrite.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c nistwrite.c -MT nistwrite.lo -MD -MP -MF .deps/nistwrite.TPlo -o nistwrite.o >/dev/null 2>&1 mv -f .libs/nistwrite.lo nistwrite.lo source='g711.c' object='g711.lo' libtool=yes \ depfile='.deps/g711.Plo' tmpdepfile='.deps/g711.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o g711.lo `test -f g711.c || echo './'`g711.c rm -f .libs/g711.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c g711.c -MT g711.lo -MD -MP -MF .deps/g711.TPlo -fPIC -DPIC -o .libs/g711.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c g711.c -MT g711.lo -MD -MP -MF .deps/g711.TPlo -o g711.o >/dev/null 2>&1 mv -f .libs/g711.lo g711.lo source='modules.c' object='modules.lo' libtool=yes \ depfile='.deps/modules.Plo' tmpdepfile='.deps/modules.TPlo' \ depmode=gcc3 /bin/sh ../depcomp \ /bin/sh ../libtool --mode=compile sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c -o modules.lo `test -f modules.c || echo './'`modules.c rm -f .libs/modules.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c modules.c -MT modules.lo -MD -MP -MF .deps/modules.TPlo -fPIC -DPIC -o .libs/modules.lo sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -DNDEBUG -O2 -c modules.c -MT modules.lo -MD -MP -MF .deps/modules.TPlo -o modules.o >/dev/null 2>&1 mv -f .libs/modules.lo modules.lo /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -DNDEBUG -O2 -o libaudiofile.la -rpath /usr/lib -version-info 0:2:0 -no-undefined -export-symbols audiofile.exports openclose.lo setup.lo format.lo data.lo pcm.lo error.lo byteorder.lo af_vfs.lo util.lo debug.lo aupv.lo units.lo compression.lo aes.lo instrument.lo loop.lo marker.lo misc.lo track.lo query.lo raw.lo aiff.lo aiffwrite.lo extended.lo next.lo nextwrite.lo wave.lo wavewrite.lo ircam.lo ircamwrite.lo avr.lo avrwrite.lo iff.lo iffwrite.lo nist.lo nistwrite.lo g711.lo modules.lo modules/libmodules.la -lm rm -fr .libs/libaudiofile.la .libs/libaudiofile.* .libs/libaudiofile.* sparc-splack-linux-gcc -shared openclose.lo setup.lo format.lo data.lo pcm.lo error.lo byteorder.lo af_vfs.lo util.lo debug.lo aupv.lo units.lo compression.lo aes.lo instrument.lo loop.lo marker.lo misc.lo track.lo query.lo raw.lo aiff.lo aiffwrite.lo extended.lo next.lo nextwrite.lo wave.lo wavewrite.lo ircam.lo ircamwrite.lo avr.lo avrwrite.lo iff.lo iffwrite.lo nist.lo nistwrite.lo g711.lo modules.lo -Wl,--whole-archive modules/.libs/libmodules.al -Wl,--no-whole-archive modules/.libs/libmodules.al -lm -Wl,-soname -Wl,libaudiofile.so.0 -Wl,-retain-symbols-file -Wl,audiofile.exports -o .libs/libaudiofile.so.0.0.2 (cd .libs && rm -f libaudiofile.so.0 && ln -s libaudiofile.so.0.0.2 libaudiofile.so.0) (cd .libs && rm -f libaudiofile.so && ln -s libaudiofile.so.0.0.2 libaudiofile.so) rm -fr .libs/libaudiofile.lax mkdir .libs/libaudiofile.lax rm -fr .libs/libaudiofile.lax/libmodules.al mkdir .libs/libaudiofile.lax/libmodules.al (cd .libs/libaudiofile.lax/libmodules.al && ar x /tmp/audiofile-0.2.6/libaudiofile/modules/.libs/libmodules.al) ar cru .libs/libaudiofile.a openclose.o setup.o format.o data.o pcm.o error.o byteorder.o af_vfs.o util.o debug.o aupv.o units.o compression.o aes.o instrument.o loop.o marker.o misc.o track.o query.o raw.o aiff.o aiffwrite.o extended.o next.o nextwrite.o wave.o wavewrite.o ircam.o ircamwrite.o avr.o avrwrite.o iff.o iffwrite.o nist.o nistwrite.o g711.o modules.o .libs/libaudiofile.lax/libmodules.al/g711.lo .libs/libaudiofile.lax/libmodules.al/pcm.lo .libs/libaudiofile.lax/libmodules.al/msadpcm.lo .libs/libaudiofile.lax/libmodules.al/ima.lo .libs/libaudiofile.lax/libmodules.al/adpcm.lo .libs/libaudiofile.lax/libmodules.al/rebuffer.lo ranlib .libs/libaudiofile.a rm -fr .libs/libaudiofile.lax creating libaudiofile.la (cd .libs && rm -f libaudiofile.la && ln -s ../libaudiofile.la libaudiofile.la) make[3]: Leaving directory `/tmp/audiofile-0.2.6/libaudiofile' make[2]: Leaving directory `/tmp/audiofile-0.2.6/libaudiofile' Making all in sfcommands make[2]: Entering directory `/tmp/audiofile-0.2.6/sfcommands' source='sfconvert.c' object='sfconvert.o' libtool=no \ depfile='.deps/sfconvert.Po' tmpdepfile='.deps/sfconvert.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f sfconvert.c || echo './'`sfconvert.c source='printinfo.c' object='printinfo.o' libtool=no \ depfile='.deps/printinfo.Po' tmpdepfile='.deps/printinfo.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f printinfo.c || echo './'`printinfo.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o sfconvert sfconvert.o printinfo.o ../libaudiofile/libaudiofile.la -lm mkdir .libs sparc-splack-linux-gcc -O2 -o .libs/sfconvert sfconvert.o printinfo.o ../libaudiofile/.libs/libaudiofile.so -lm creating sfconvert source='sfinfo.c' object='sfinfo.o' libtool=no \ depfile='.deps/sfinfo.Po' tmpdepfile='.deps/sfinfo.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f sfinfo.c || echo './'`sfinfo.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o sfinfo sfinfo.o printinfo.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/sfinfo sfinfo.o printinfo.o ../libaudiofile/.libs/libaudiofile.so -lm creating sfinfo make[2]: Leaving directory `/tmp/audiofile-0.2.6/sfcommands' Making all in test make[2]: Entering directory `/tmp/audiofile-0.2.6/test' source='error.c' object='error.o' libtool=no \ depfile='.deps/error.Po' tmpdepfile='.deps/error.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f error.c || echo './'`error.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o error error.o ../libaudiofile/libaudiofile.la -lm mkdir .libs sparc-splack-linux-gcc -O2 -o .libs/error error.o ../libaudiofile/.libs/libaudiofile.so -lm creating error source='floatto24.c' object='floatto24.o' libtool=no \ depfile='.deps/floatto24.Po' tmpdepfile='.deps/floatto24.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f floatto24.c || echo './'`floatto24.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o floatto24 floatto24.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/floatto24 floatto24.o ../libaudiofile/.libs/libaudiofile.so -lm creating floatto24 source='transparency.c' object='transparency.o' libtool=no \ depfile='.deps/transparency.Po' tmpdepfile='.deps/transparency.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f transparency.c || echo './'`transparency.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o transparency transparency.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/transparency transparency.o ../libaudiofile/.libs/libaudiofile.so -lm creating transparency source='miscread.c' object='miscread.o' libtool=no \ depfile='.deps/miscread.Po' tmpdepfile='.deps/miscread.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f miscread.c || echo './'`miscread.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o miscread miscread.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/miscread miscread.o ../libaudiofile/.libs/libaudiofile.so -lm creating miscread source='miscwrite.c' object='miscwrite.o' libtool=no \ depfile='.deps/miscwrite.Po' tmpdepfile='.deps/miscwrite.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f miscwrite.c || echo './'`miscwrite.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o miscwrite miscwrite.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/miscwrite miscwrite.o ../libaudiofile/.libs/libaudiofile.so -lm creating miscwrite source='query2.c' object='query2.o' libtool=no \ depfile='.deps/query2.Po' tmpdepfile='.deps/query2.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f query2.c || echo './'`query2.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o query2 query2.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/query2 query2.o ../libaudiofile/.libs/libaudiofile.so -lm creating query2 source='testaupv.c' object='testaupv.o' libtool=no \ depfile='.deps/testaupv.Po' tmpdepfile='.deps/testaupv.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f testaupv.c || echo './'`testaupv.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o testaupv testaupv.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/testaupv testaupv.o ../libaudiofile/.libs/libaudiofile.so -lm creating testaupv source='writeaiff.c' object='writeaiff.o' libtool=no \ depfile='.deps/writeaiff.Po' tmpdepfile='.deps/writeaiff.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writeaiff.c || echo './'`writeaiff.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writeaiff writeaiff.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writeaiff writeaiff.o ../libaudiofile/.libs/libaudiofile.so -lm creating writeaiff source='writeircam.c' object='writeircam.o' libtool=no \ depfile='.deps/writeircam.Po' tmpdepfile='.deps/writeircam.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writeircam.c || echo './'`writeircam.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writeircam writeircam.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writeircam writeircam.o ../libaudiofile/.libs/libaudiofile.so -lm creating writeircam source='writenext.c' object='writenext.o' libtool=no \ depfile='.deps/writenext.Po' tmpdepfile='.deps/writenext.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writenext.c || echo './'`writenext.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writenext writenext.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writenext writenext.o ../libaudiofile/.libs/libaudiofile.so -lm creating writenext source='writewave.c' object='writewave.o' libtool=no \ depfile='.deps/writewave.Po' tmpdepfile='.deps/writewave.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writewave.c || echo './'`writewave.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writewave writewave.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writewave writewave.o ../libaudiofile/.libs/libaudiofile.so -lm creating writewave source='writeraw.c' object='writeraw.o' libtool=no \ depfile='.deps/writeraw.Po' tmpdepfile='.deps/writeraw.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writeraw.c || echo './'`writeraw.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writeraw writeraw.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writeraw writeraw.o ../libaudiofile/.libs/libaudiofile.so -lm creating writeraw source='writeavr.c' object='writeavr.o' libtool=no \ depfile='.deps/writeavr.Po' tmpdepfile='.deps/writeavr.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writeavr.c || echo './'`writeavr.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writeavr writeavr.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writeavr writeavr.o ../libaudiofile/.libs/libaudiofile.so -lm creating writeavr source='writeiff.c' object='writeiff.o' libtool=no \ depfile='.deps/writeiff.Po' tmpdepfile='.deps/writeiff.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writeiff.c || echo './'`writeiff.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writeiff writeiff.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writeiff writeiff.o ../libaudiofile/.libs/libaudiofile.so -lm creating writeiff source='writenist.c' object='writenist.o' libtool=no \ depfile='.deps/writenist.Po' tmpdepfile='.deps/writenist.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writenist.c || echo './'`writenist.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writenist writenist.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writenist writenist.o ../libaudiofile/.libs/libaudiofile.so -lm creating writenist source='writeulaw.c' object='writeulaw.o' libtool=no \ depfile='.deps/writeulaw.Po' tmpdepfile='.deps/writeulaw.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writeulaw.c || echo './'`writeulaw.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writeulaw writeulaw.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writeulaw writeulaw.o ../libaudiofile/.libs/libaudiofile.so -lm creating writeulaw source='writealaw.c' object='writealaw.o' libtool=no \ depfile='.deps/writealaw.Po' tmpdepfile='.deps/writealaw.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f writealaw.c || echo './'`writealaw.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o writealaw writealaw.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/writealaw writealaw.o ../libaudiofile/.libs/libaudiofile.so -lm creating writealaw source='loop.c' object='loop.o' libtool=no \ depfile='.deps/loop.Po' tmpdepfile='.deps/loop.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f loop.c || echo './'`loop.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o loop loop.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/loop loop.o ../libaudiofile/.libs/libaudiofile.so -lm creating loop source='instparamwrite.c' object='instparamwrite.o' libtool=no \ depfile='.deps/instparamwrite.Po' tmpdepfile='.deps/instparamwrite.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f instparamwrite.c || echo './'`instparamwrite.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o instparamwrite instparamwrite.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/instparamwrite instparamwrite.o ../libaudiofile/.libs/libaudiofile.so -lm creating instparamwrite source='instparamtest.c' object='instparamtest.o' libtool=no \ depfile='.deps/instparamtest.Po' tmpdepfile='.deps/instparamtest.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f instparamtest.c || echo './'`instparamtest.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o instparamtest instparamtest.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/instparamtest instparamtest.o ../libaudiofile/.libs/libaudiofile.so -lm creating instparamtest source='sixteen-to-eight.c' object='sixteen-to-eight.o' libtool=no \ depfile='.deps/sixteen-to-eight.Po' tmpdepfile='.deps/sixteen-to-eight.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f sixteen-to-eight.c || echo './'`sixteen-to-eight.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o sixteen-to-eight sixteen-to-eight.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/sixteen-to-eight sixteen-to-eight.o ../libaudiofile/.libs/libaudiofile.so -lm creating sixteen-to-eight source='testfloat.c' object='testfloat.o' libtool=no \ depfile='.deps/testfloat.Po' tmpdepfile='.deps/testfloat.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f testfloat.c || echo './'`testfloat.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o testfloat testfloat.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/testfloat testfloat.o ../libaudiofile/.libs/libaudiofile.so -lm creating testfloat source='twentyfour.c' object='twentyfour.o' libtool=no \ depfile='.deps/twentyfour.Po' tmpdepfile='.deps/twentyfour.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f twentyfour.c || echo './'`twentyfour.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o twentyfour twentyfour.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/twentyfour twentyfour.o ../libaudiofile/.libs/libaudiofile.so -lm creating twentyfour source='twentyfour2.c' object='twentyfour2.o' libtool=no \ depfile='.deps/twentyfour2.Po' tmpdepfile='.deps/twentyfour2.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f twentyfour2.c || echo './'`twentyfour2.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o twentyfour2 twentyfour2.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/twentyfour2 twentyfour2.o ../libaudiofile/.libs/libaudiofile.so -lm creating twentyfour2 source='pipe.c' object='pipe.o' libtool=no \ depfile='.deps/pipe.Po' tmpdepfile='.deps/pipe.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f pipe.c || echo './'`pipe.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o pipe pipe.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/pipe pipe.o ../libaudiofile/.libs/libaudiofile.so -lm creating pipe source='testmarkers.c' object='testmarkers.o' libtool=no \ depfile='.deps/testmarkers.Po' tmpdepfile='.deps/testmarkers.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f testmarkers.c || echo './'`testmarkers.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o testmarkers testmarkers.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/testmarkers testmarkers.o ../libaudiofile/.libs/libaudiofile.so -lm creating testmarkers source='testchannelmatrix.c' object='testchannelmatrix.o' libtool=no \ depfile='.deps/testchannelmatrix.Po' tmpdepfile='.deps/testchannelmatrix.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f testchannelmatrix.c || echo './'`testchannelmatrix.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o testchannelmatrix testchannelmatrix.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/testchannelmatrix testchannelmatrix.o ../libaudiofile/.libs/libaudiofile.so -lm creating testchannelmatrix source='printmarkers.c' object='printmarkers.o' libtool=no \ depfile='.deps/printmarkers.Po' tmpdepfile='.deps/printmarkers.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f printmarkers.c || echo './'`printmarkers.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o printmarkers printmarkers.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/printmarkers printmarkers.o ../libaudiofile/.libs/libaudiofile.so -lm creating printmarkers source='seek.c' object='seek.o' libtool=no \ depfile='.deps/seek.Po' tmpdepfile='.deps/seek.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f seek.c || echo './'`seek.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o seek seek.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/seek seek.o ../libaudiofile/.libs/libaudiofile.so -lm creating seek make[2]: Leaving directory `/tmp/audiofile-0.2.6/test' Making all in examples make[2]: Entering directory `/tmp/audiofile-0.2.6/examples' source='adddcoffset.c' object='adddcoffset.o' libtool=no \ depfile='.deps/adddcoffset.Po' tmpdepfile='.deps/adddcoffset.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f adddcoffset.c || echo './'`adddcoffset.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o adddcoffset adddcoffset.o ../libaudiofile/libaudiofile.la -lm mkdir .libs sparc-splack-linux-gcc -O2 -o .libs/adddcoffset adddcoffset.o ../libaudiofile/.libs/libaudiofile.so -lm creating adddcoffset source='power.c' object='power.o' libtool=no \ depfile='.deps/power.Po' tmpdepfile='.deps/power.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f power.c || echo './'`power.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o power power.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/power power.o ../libaudiofile/.libs/libaudiofile.so -lm creating power source='linuxtest.c' object='linuxtest.o' libtool=no \ depfile='.deps/linuxtest.Po' tmpdepfile='.deps/linuxtest.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ sparc-splack-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../libaudiofile -O2 -c `test -f linuxtest.c || echo './'`linuxtest.c /bin/sh ../libtool --mode=link sparc-splack-linux-gcc -O2 -o linuxtest linuxtest.o ../libaudiofile/libaudiofile.la -lm sparc-splack-linux-gcc -O2 -o .libs/linuxtest linuxtest.o ../libaudiofile/.libs/libaudiofile.so -lm creating linuxtest make[2]: Leaving directory `/tmp/audiofile-0.2.6/examples' Making all in docs make[2]: Entering directory `/tmp/audiofile-0.2.6/docs' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/tmp/audiofile-0.2.6/docs' Making all in win32 make[2]: Entering directory `/tmp/audiofile-0.2.6/win32' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/tmp/audiofile-0.2.6/win32' make[2]: Entering directory `/tmp/audiofile-0.2.6' make[2]: Leaving directory `/tmp/audiofile-0.2.6' make[1]: Leaving directory `/tmp/audiofile-0.2.6' Making install in libaudiofile make[1]: Entering directory `/tmp/audiofile-0.2.6/libaudiofile' Making install in modules make[2]: Entering directory `/tmp/audiofile-0.2.6/libaudiofile/modules' make[3]: Entering directory `/tmp/audiofile-0.2.6/libaudiofile/modules' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/tmp/audiofile-0.2.6/libaudiofile/modules' make[2]: Leaving directory `/tmp/audiofile-0.2.6/libaudiofile/modules' make[2]: Entering directory `/tmp/audiofile-0.2.6/libaudiofile' make[3]: Entering directory `/tmp/audiofile-0.2.6/libaudiofile' /bin/sh ../mkinstalldirs /tmp/package-audiofile/usr/lib mkdir /tmp/package-audiofile mkdir /tmp/package-audiofile/usr mkdir /tmp/package-audiofile/usr/lib /bin/sh ../libtool --mode=install /usr/bin/ginstall -c libaudiofile.la /tmp/package-audiofile/usr/lib/libaudiofile.la /usr/bin/ginstall -c .libs/libaudiofile.so.0.0.2 /tmp/package-audiofile/usr/lib/libaudiofile.so.0.0.2 (cd /tmp/package-audiofile/usr/lib && rm -f libaudiofile.so.0 && ln -s libaudiofile.so.0.0.2 libaudiofile.so.0) (cd /tmp/package-audiofile/usr/lib && rm -f libaudiofile.so && ln -s libaudiofile.so.0.0.2 libaudiofile.so) /usr/bin/ginstall -c .libs/libaudiofile.lai /tmp/package-audiofile/usr/lib/libaudiofile.la /usr/bin/ginstall -c .libs/libaudiofile.a /tmp/package-audiofile/usr/lib/libaudiofile.a ranlib /tmp/package-audiofile/usr/lib/libaudiofile.a chmod 644 /tmp/package-audiofile/usr/lib/libaudiofile.a /bin/sh ../mkinstalldirs /tmp/package-audiofile/usr/include mkdir /tmp/package-audiofile/usr/include /usr/bin/ginstall -c -m 644 audiofile.h /tmp/package-audiofile/usr/include/audiofile.h /usr/bin/ginstall -c -m 644 aupvlist.h /tmp/package-audiofile/usr/include/aupvlist.h /usr/bin/ginstall -c -m 644 af_vfs.h /tmp/package-audiofile/usr/include/af_vfs.h make[3]: Leaving directory `/tmp/audiofile-0.2.6/libaudiofile' make[2]: Leaving directory `/tmp/audiofile-0.2.6/libaudiofile' make[1]: Leaving directory `/tmp/audiofile-0.2.6/libaudiofile' Making install in sfcommands make[1]: Entering directory `/tmp/audiofile-0.2.6/sfcommands' make[2]: Entering directory `/tmp/audiofile-0.2.6/sfcommands' /bin/sh ../mkinstalldirs /tmp/package-audiofile/usr/bin mkdir /tmp/package-audiofile/usr/bin /bin/sh ../libtool --mode=install /usr/bin/ginstall -c sfconvert /tmp/package-audiofile/usr/bin/sfconvert /usr/bin/ginstall -c .libs/sfconvert /tmp/package-audiofile/usr/bin/sfconvert /bin/sh ../libtool --mode=install /usr/bin/ginstall -c sfinfo /tmp/package-audiofile/usr/bin/sfinfo /usr/bin/ginstall -c .libs/sfinfo /tmp/package-audiofile/usr/bin/sfinfo make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/tmp/audiofile-0.2.6/sfcommands' make[1]: Leaving directory `/tmp/audiofile-0.2.6/sfcommands' Making install in test make[1]: Entering directory `/tmp/audiofile-0.2.6/test' make[2]: Entering directory `/tmp/audiofile-0.2.6/test' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/tmp/audiofile-0.2.6/test' make[1]: Leaving directory `/tmp/audiofile-0.2.6/test' Making install in examples make[1]: Entering directory `/tmp/audiofile-0.2.6/examples' make[2]: Entering directory `/tmp/audiofile-0.2.6/examples' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/tmp/audiofile-0.2.6/examples' make[1]: Leaving directory `/tmp/audiofile-0.2.6/examples' Making install in docs make[1]: Entering directory `/tmp/audiofile-0.2.6/docs' make[2]: Entering directory `/tmp/audiofile-0.2.6/docs' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/tmp/audiofile-0.2.6/docs' make[1]: Leaving directory `/tmp/audiofile-0.2.6/docs' Making install in win32 make[1]: Entering directory `/tmp/audiofile-0.2.6/win32' make[2]: Entering directory `/tmp/audiofile-0.2.6/win32' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/tmp/audiofile-0.2.6/win32' make[1]: Leaving directory `/tmp/audiofile-0.2.6/win32' make[1]: Entering directory `/tmp/audiofile-0.2.6' make[2]: Entering directory `/tmp/audiofile-0.2.6' /bin/sh ./mkinstalldirs /tmp/package-audiofile/usr/bin /usr/bin/ginstall -c audiofile-config /tmp/package-audiofile/usr/bin/audiofile-config /bin/sh ./mkinstalldirs /tmp/package-audiofile/usr/share/aclocal mkdir /tmp/package-audiofile/usr/share mkdir /tmp/package-audiofile/usr/share/aclocal /usr/bin/ginstall -c -m 644 audiofile.m4 /tmp/package-audiofile/usr/share/aclocal/audiofile.m4 /bin/sh ./mkinstalldirs /tmp/package-audiofile/usr/lib/pkgconfig mkdir /tmp/package-audiofile/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 audiofile.pc /tmp/package-audiofile/usr/lib/pkgconfig/audiofile.pc make[2]: Leaving directory `/tmp/audiofile-0.2.6' make[1]: Leaving directory `/tmp/audiofile-0.2.6' Slackware package maker, version 2.1. Searching for symbolic links: usr/lib/libaudiofile.so.0 -> libaudiofile.so.0.0.2 usr/lib/libaudiofile.so -> libaudiofile.so.0.0.2 Making symbolic link creation script: ( cd usr/lib ; rm -rf libaudiofile.so.0 ) ( cd usr/lib ; ln -sf libaudiofile.so.0.0.2 libaudiofile.so.0 ) ( cd usr/lib ; rm -rf libaudiofile.so ) ( cd usr/lib ; ln -sf libaudiofile.so.0.0.2 libaudiofile.so ) It is recommended that you make these lines your new installation script. Would you like to make this stuff the install script for this package and remove the symbolic links ([y]es, [n]o)? y Removing symbolic links: removed `./usr/lib/libaudiofile.so.0' removed `./usr/lib/libaudiofile.so' Creating your new ./install/doinst.sh... This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file audiofile-0.2.6-sparc-0.tar... ./ usr/ usr/lib/ usr/lib/libaudiofile.so.0.0.2 usr/lib/libaudiofile.la usr/lib/libaudiofile.a usr/lib/pkgconfig/ usr/lib/pkgconfig/audiofile.pc usr/include/ usr/include/audiofile.h usr/include/aupvlist.h usr/include/af_vfs.h usr/bin/ usr/bin/sfconvert usr/bin/sfinfo usr/bin/audiofile-config usr/share/ usr/share/aclocal/ usr/share/aclocal/audiofile.m4 usr/doc/ usr/doc/audiofile-0.2.6/ usr/doc/audiofile-0.2.6/COPYING usr/doc/audiofile-0.2.6/TODO usr/doc/audiofile-0.2.6/README usr/doc/audiofile-0.2.6/ChangeLog usr/doc/audiofile-0.2.6/Makefile usr/doc/audiofile-0.2.6/Makefile.am usr/doc/audiofile-0.2.6/Makefile.in usr/doc/audiofile-0.2.6/afCloseFile usr/doc/audiofile-0.2.6/afGetFrameSize usr/doc/audiofile-0.2.6/afGetTrackBytes usr/doc/audiofile-0.2.6/afIntro usr/doc/audiofile-0.2.6/afNewFileSetup usr/doc/audiofile-0.2.6/afOpenFile usr/doc/audiofile-0.2.6/afQuery usr/doc/audiofile-0.2.6/afReadFrames usr/doc/audiofile-0.2.6/afReadMisc usr/doc/audiofile-0.2.6/afSeekFrame usr/doc/audiofile-0.2.6/afSetErrorHandler usr/doc/audiofile-0.2.6/afSetVirtualByteOrder usr/doc/audiofile-0.2.6/afWriteFrames usr/doc/audiofile-0.2.6/sfconvert usr/doc/audiofile-0.2.6/sfinfo install/ install/slack-desc install/doinst.sh Gzipping audiofile-0.2.6-sparc-0.tar... Renaming audiofile-0.2.6-sparc-0.tar.gz to audiofile-0.2.6-sparc-0.tgz... Moving audiofile-0.2.6-sparc-0.tgz to ..... Package creation complete.