#!/bin/sh # rc.S: Basic system initialization. # Any /etc/mtab that exists here is old, so we start with a new one: /bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab # Add (fake) entry for / to /etc/mtab: /sbin/mount -f -w /dev/initramfs / -t tmpfs 1> /dev/null # Mount /proc: /sbin/mount -v proc /proc -t proc 1> /dev/null # Mount sysfs next: /sbin/mount -v sysfs /sys -t sysfs 1> /dev/null # Activate swap: /sbin/swapon -a 1> /dev/null if [ -x /sbin/ldconfig ]; then /sbin/ldconfig 1> /dev/null fi export TEXTDOMAIN=slint . gettext.sh . /usr/lib/setup/SeTlocales ## Detect serial console from kernel command line: #if cat /proc/cmdline | grep console=ttyS 1> /dev/null 2> /dev/null ; then # SERIAL_CONSOLE="true" #fi # System logger (mostly to eat annoying messages): /sbin/syslogd 2> /dev/null sleep 1 /sbin/klogd -c 3 1> /dev/null # Try to load the loop module: modprobe loop 1> /dev/null 2> /dev/null # Run udev: if ! grep -wq noudev /proc/cmdline ; then /bin/bash /etc/rc.d/rc.udev start # Re-assemble RAID volumes: /sbin/mdadm -E -s > /etc/mdadm.conf /sbin/mdadm -S -s /sbin/mdadm -A -s # This seems to make the kernel see partitions more reliably: fdisk -l /dev/md* 1> /dev/null 2> /dev/null else # Look for USB keyboard or storage: /etc/rc.d/rc.usb start sleep 3 # Look for IEEE1394 devices: if grep 1394 /proc/pci 1> /dev/null 2> /dev/null ; then /etc/rc.d/rc.ieee1394 start #sleep 3 fi ### PROBABLY USELESS WITHOUT SOME TIMED DELAY ABOVE ## Start USB again (in case we missed a USB keyboard) #/etc/rc.d/rc.usb start # Make detected partitions: /dev/makedevs.sh # Re-assemble RAID volumes: /sbin/mdadm -E -s > /etc/mdadm.conf /sbin/mdadm -S -s /sbin/mdadm -A -s # This seems to make the kernel see partitions more reliably: fdisk -l /dev/md* 1> /dev/null 2> /dev/null # Check /proc/partitions again: /dev/makedevs.sh # Create LVM nodes: /dev/devmap_mknod.sh fi # End Run udev: sleep 1 # Start brltty if it has not yet been started by udev - Didier Spaier NBPROC="`ps -C brltty --noheaders|wc -l`" if [ "$NBPROC" = "0" ]; then echo "starting brltty" /bin/brltty sleep 2 fi touch /.today /bin/sh /sbin/fakedate if [ -x /etc/rc.d/rc.inet1 ]; then /bin/sh /etc/rc.d/rc.inet1 fi # pcmciautils is installing rc.pcmcia as chmod 644, so we'll change that. # It won't be run at boot time, but it'll make it easy for the pcmcia script # or to run it from the command line. chmod 755 /etc/rc.d/rc.pcmcia # Scan for existing LVM partitions: # We will run 'vgscan -ay' in the setup to prevent a 10 second sleep; vgscan --mknodes 2> /tmp/foo cat /tmp/foo | uniq rm -f /tmp/foo # Activate LVM volumes: echo "Activating LVM volumes:" vgchange -ay /bin/sh /etc/rc.d/rc.font # Don't automatically blank the screen, or it will go black during the install # process when stray keystrokes might be dangerous: /bin/setterm -blank 0 TMP=/var/log/setup/tmp if [ ! -d $TMP ]; then mkdir -p $TMP fi TMP=/var/log/setup/tmp if grep -wq brltty /proc/cmdline; then if [ ! -r /dev/tty1 ]; then mknod /dev/tty1 c 4 1 chown root:tty /dev/tty1 chmod 620 /dev/tty1 fi if [ ! -r /dev/tty2 ]; then mknod /dev/tty2 c 4 2 chown root:tty /dev/tty2 chmod 620 /dev/tty2 fi if [ ! -r /dev/tty3 ]; then mknod /dev/tty3 c 4 3 chown root:tty /dev/tty3 chmod 620 /dev/tty3 fi if [ ! -r /dev/tty4 ]; then mknod /dev/tty4 c 4 4 chown root:tty /dev/tty4 chmod 620 /dev/tty4 fi /bin/stty -F /dev/tty1 cols 80 rows 25 /bin/stty -F /dev/tty2 cols 80 rows 25 /bin/stty -F /dev/tty3 cols 80 rows 25 /bin/stty -F /dev/tty4 cols 80 rows 25 fi kbd_stored="`cat /tmp/Pkeymap`" kbd=${kbd_stored%.*} #SavedLANG=$LANG #LANG=en_US.utf8 ll_TT=${LANG%.*} SeTFonts PutFonts set_voice () { locale="$1" rawlocale=${locale%.utf8} lang=$(echo $rawlocale |cut -d_ -f1) country=$(echo $rawlocale |cut -d_ -f2|tr A-Z a-z) if [ "$lang" = gl ]; then # Not supported by espeak yet, but pt should be fine enough, better # than English anyway # Comment above from Debian. We don't propose gv in Slint yet, but # maybe later ? lang=pt fi if grep -qr "^language $lang-$country$" /usr/share/espeak-ng-data/lang; then VOICE="$lang-$country" elif grep -qr "^language $lang$" /usr/share/espeak-ng-data/lang; then VOICE="$lang" else VOICE=en fi echo $VOICE > /tmp/speech } # Taken from Debian . /usr/share/alsa/utils.sh preinit_levels all sanify_levels all # speakup initialization. # If a hard synth is set in the command line (how do I provide this ability # with grub?) no need to start espeakup. if ! grep -q speakup /proc/cmdline; then modprobe speakup_soft echo "soft" > /sys/accessibility/speakup/synth sleep 1 # chmod 666 not needed in the installer, we are root. # chmod 666 /sys/accessibility/speakup/soft/* echo 1 > /sys/accessibility/speakup/soft/direct else touch /tmp/noespeakup fi # End speakup initialization # Mostly from Debian if [ ! -f /tmp/noespakeup ]; then set_voice $LANG # Probe the sound cards as in Debian sh /usr/sbin/probe_sound_cards sleep 2 fi # If a working sound card has been found, its id has been written in # /tmp/alsacard, else /tmp/noespeakup has been written if [ ! -f /tmp/noespeakup ]; then sleep 2 clear read -N 10000000 -t 0.01 gettext "This installer has speech and Braille device support in order to be accessible to visually impaired users. To have speech turned on during installation type S, then press [Enter]. Else, just press Enter. " read sound if [ ! "$sound" = "s" ] && [ ! "$sound" = "S" ]; then PID=$(ps -C espeakup --noheaders -o pid) kill -s 9 $PID sleep 1 touch /tmp/noespeakup fi fi clear if [ ! -f /tmp/noespeakup ] || grep -q speakup /proc/cmdline; then gettext "To display keyboard shortcuts for reviewing the screen with speech press R, then press [Enter], Else, just press [Enter]: " read ANSWER if [ "$ANSWER" = "R" ] || [ "$ANSWER" = "r" ]; then clear /bin/less /Speakup.txt read fi fi clear INITLANG=$LANG TITLE=$(gettext "LANGUAGE TO USE DURING INSTALLATION") dialog --visit-items --no-tags --no-cancel --nook --title "$TITLE" --default-item "$INITLANG" --menu \ "$(eval_gettext "Please select the language to use for installation.")" 0 0 0 \ en_US.utf8 "$(gettext "English (USA)")" \ nl_NL.utf8 "$(gettext "Dutch")" \ fr_FR.utf8 "$(gettext "French")" \ de_DE.utf8 "$(gettext "German")" \ el_GR.utf8 "$(gettext "Greek")" \ it_IT.utf8 "$(gettext "Italian")" \ nb_NO.utf8 "$(gettext "Norwegian")" \ pl_PL.utf8 "$(gettext "Polish")" \ pt_BR.utf8 "$(gettext "Portuguese (Brazil)")" \ pt_PT.utf8 "$(gettext "Portuguese (Portugal)")" \ ru_RU.utf8 "$(gettext "Russian")" \ es_CR.utf8 "$(gettext "Spanish (Latin America)")" \ sk_SK.utf8 "$(gettext "Slovak")" \ sv_SE.utf8 "$(gettext "Swedish")" \ tr_TR.utf8 "$(gettext "Turkish")" \ uk_UA.utf8 "$(gettext "Ukrainian")" \ 2> /tmp/.SlintInstallationLANG if [ $? -ne 0 ]; then echo $INITLANG > /tmp/.SlintInstallationLANG fi LANG=$(cat /tmp/.SlintInstallationLANG) ll_TT=${LANG%.*} SeTlocales SeTKeymap SeTFonts PutFonts if [ ! -f /tmp/noespeakup ] && [ ! "$INITLANG" = "$LANG" ]; then PID=$(ps -C espeakup --noheaders -o pid) kill -s 9 $PID sleep 1 set_voice $LANG ALSA_CARD=$(cat /tmp/alsacard) ALSA_CARD=$ALSA_CARD /usr/bin/espeakup -V $(cat /tmp/speech) >> /tmp/espeakup.log 2>&1 echo "ALSA_CARD=$ALSA_CARD /usr/bin/espeakup -V $(cat /tmp/speech)" >> /tmp/report fi clear eval_gettext "