This Wireless Router Access Point (wrap) image is a working implementation of the
"Setting up a WiFi Access Point on your Slackware Box" article on docs.slackware.com
http://docs.slackware.com/howtos:network_services:running_an_access_point_from_a_slackware_box

You should read the article to get an overview of how the Slackware ARM miniroot 
system was customized to serve as as a wrap.

Here is a quickstart list to get you started if you're in a hurry:

1)  write the image file a SD/uSD with cat rpi_wrap_512mb.img > /dev/sd<x>
    where <x> is the drave letter of the SD ... on some systems that may be /dev/mmcblk<x>

2)  hook up a console to your pi, boot, login and remount root rw
    mount -o remount /

3)  edit /etc/udev/rules.d/70-persistent-net.rules and make sure at least 
    eth0 and wlan0 match the mac addresses of your hardware

4)  edit hostapd setting for wlan0 (and any other extra device you want to use)
    a) edit /etc/hostapd/wlan0.conf and modify essid and channel

    b)  edit /etc/hostapd/wlan0.wpa_psk and insert your password 

5)  edit edit /etc/hostapd/wlan0.accept and insert the mac address list you 
    wish to allow on your wireless network

6)  edit /etc/dnsmasq/br0.conf and configure dns and dhcp for your network

7)  edit /etc/firewall.cf and configure your specific wirewall needs

8)  edit /etc/rc.d/network/wlan0, /etc/rc.d/network/eth0, /etc/rc.d/network/br0

9)  edit /etc/HOSTNAME and /etc/hosts 

10) edit /etc/ssh/sshd_config and make sure sshd is listenong 
    on the correct address for your network 

11) remove and regenerate your host ssh keys
    /etc/rc.d/rc.sshd stop
    rm -f /etc/ssh/ssh_host_*
    /etc/rc.d/rc.sshd start

12) setup you want ppp/pppos connection if required
 
    a) edit /etc/ppp/peers/template and rename it to whatever is more relavent for you
    
    b) edit /etc/ppp/options and check that all is good for you
 
    c) edit /etc/ppp/pap-secrets (chap-secrets is a link to pap-secrets)

13) change the default root password

14) edit /etc/hosts and /etc/HOSTNAME

15) edit /etc/rc.d/rc.S and put some sensible default dns server in the tmpfs linked file
    these are the lines you are looking for:
    /bin/echo "nameserver 8.8.8.8" > /etc/resolv.conf
    /bin/echo "nameserver 8.8.4.4" >> /etc/resolv.conf

16) remount root ro and reboot ro chech everything is working fine
    mount -o remount,ro /
    reboot
