=== release 1.6.0 ===

2015-09-25  Sebastian Dröge <slomo@coaxion.net>

	* configure.ac:
	  releasing 1.6.0

2015-09-25 10:18:07 +0900  Vineeth TM <vineeth.tm@samsung.com>

	* libs/gst/net/gstptpclock.c:
	  ptpclock: Fix error leak during failures
	  https://bugzilla.gnome.org/show_bug.cgi?id=755607

2015-09-21 13:58:51 +0200  Stian Selnes <stian@pexip.com>

	* plugins/elements/gstfunnel.c:
	* tests/check/elements/funnel.c:
	  funnel: Fix racy state change
	  Iterator may need to be resynced, for instance if pads are released
	  during state change.
	  got_eos should be protected by the object lock of the element, not of
	  the pad, as is the case throughout the rest of the funnel code.
	  https://bugzilla.gnome.org/show_bug.cgi?id=755343

2015-09-21 15:22:19 +0200  Stian Selnes <stian@pexip.com>

	* gst/gstbin.c:
	* gst/gstelement.c:
	  bin: element: Ignore activate result for removed pads on state change
	  This fixes a race where a state change may return failure if it has
	  request pads that are deactivated and removed (and thus have no
	  parent) at the same time as the element changes state and (de)activates
	  its pads.
	  https://bugzilla.gnome.org/show_bug.cgi?id=755342

2015-09-24 10:23:14 +0200  Havard Graff <havard.graff@gmail.com>

	* libs/gst/check/gstharness.c:
	* tests/check/libs/gstharness.c:
	  harness: don't crash when adding a sink-harness without h->sinkpad
	  https://bugzilla.gnome.org/show_bug.cgi?id=755511

2015-09-23 20:31:48 +0200  Sebastian Dröge <sebastian@centricular.com>

	* libs/gst/base/gstbasetransform.c:
	  basetransform: Print buffer PTS when submitting an input buffer

2015-09-21 14:58:46 +0900  Eunhae Choi <eunhae1.choi@samsung.com>

	* plugins/elements/gstinputselector.c:
	  inputselector: Fix buffer leak in sync_streams & cache_buffers mode
	  After doing gst_pad_push() in case of sync_streams and cache_buffers,
	  if the buffer can not be kept in cache, it should be unreffed to avoid
	  memory leackage.
	  https://bugzilla.gnome.org/show_bug.cgi?id=755141

2015-09-19 16:57:26 +0530  Vikram Fugro <vikram.fugro@gmail.com>

	* gst/gstcaps.c:
	* gst/gstpad.h:
	  gst: Documentation typo fix in caps & pad APIs
	  gst_caps_can_intersect() & GST_PAD_IS_ACCEPT_INTERSECT()
	  documentation typo fix.
	  https://bugzilla.gnome.org/show_bug.cgi?id=755257

=== release 1.5.91 ===

2015-09-18 19:07:18 +0200  Sebastian Dröge <sebastian@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* configure.ac:
	* docs/plugins/inspect/plugin-coreelements.xml:
	* gstreamer.doap:
	* win32/common/config.h:
	* win32/common/gstversion.h:
	  Release 1.5.91

2015-09-18 19:07:10 +0200  Sebastian Dröge <sebastian@centricular.com>

	* po/af.po:
	* po/az.po:
	* po/be.po:
	* po/bg.po:
	* po/ca.po:
	* po/cs.po:
	* po/da.po:
	* po/de.po:
	* po/el.po:
	* po/en_GB.po:
	* po/eo.po:
	* po/es.po:
	* po/eu.po:
	* po/fi.po:
	* po/fr.po:
	* po/gl.po:
	* po/hr.po:
	* po/hu.po:
	* po/id.po:
	* po/it.po:
	* po/ja.po:
	* po/lt.po:
	* po/nb.po:
	* po/nl.po:
	* po/pl.po:
	* po/pt_BR.po:
	* po/ro.po:
	* po/ru.po:
	* po/rw.po:
	* po/sk.po:
	* po/sl.po:
	* po/sq.po:
	* po/sr.po:
	* po/sv.po:
	* po/tr.po:
	* po/uk.po:
	* po/vi.po:
	* po/zh_CN.po:
	* po/zh_TW.po:
	  Update .po files

2015-09-18 11:49:03 +0200  Sebastian Dröge <sebastian@centricular.com>

	* po/zh_CN.po:
	  po: Update translations

2015-09-15 10:56:40 +0900  Vineeth TM <vineeth.tm@samsung.com>

	* libs/gst/check/gstcheck.c:
	* plugins/elements/gstdownloadbuffer.c:
	* tests/benchmarks/gstbufferstress.c:
	* tests/benchmarks/gstclockstress.c:
	* tests/benchmarks/gstpollstress.c:
	  downloadbuffer, benchmarks: fix error leaks in failure code paths
	  https://bugzilla.gnome.org/show_bug.cgi?id=755019

2015-09-15 10:52:55 +0900  Vineeth TM <vineeth.tm@samsung.com>

	* libs/gst/check/gstcheck.c:
	  check: Fix indentation
	  https://bugzilla.gnome.org/show_bug.cgi?id=755019

2015-09-15 18:05:11 +0100  Tim-Philipp Müller <tim@centricular.com>

	* gst/gstbufferpool.c:
	  bufferpool: sprinkle some allow-none and out annotations for g-i

2015-09-14 11:01:11 +0900  Vineeth TM <vineeth.tm@samsung.com>

	* gst/gstbin.c:
	  bin: fix typo in log message when threadpool alloc fails
	  https://bugzilla.gnome.org/show_bug.cgi?id=754975

2015-09-11 17:58:48 +0300  Igor Rondarev <igor.rondarev@gmail.com>

	* configure.ac:
	* gst/Makefile.am:
	  configure: Check for socketpair() in -lsocket too
	  On e.g. QNX it is in an external library, not libc.
	  https://bugzilla.gnome.org/show_bug.cgi?id=754875

2015-09-09 13:10:04 +0530  Arun Raghavan <git@arunraghavan.net>

	* docs/gst/gstreamer-sections.txt:
	  Revert "docs: Make sure gst_debug_bin_to_dot_data() is documented"
	  This reverts commit 0dffeb03018d12be522c2d97aaaf8102153bd7c0.
	  The commit is erroneous and documents the function twice.

2015-07-23 12:18:51 +0530  Arun Raghavan <git@arunraghavan.net>

	* docs/gst/gstreamer-sections.txt:
	  docs: Make sure gst_debug_bin_to_dot_data() is documented
	  Thanks to Nirbheek Chauhan <nirbheek@centricular.com> for pointing this
	  out.

2015-08-05 10:07:50 +0200  Stian Selnes <stian@pexip.com>

	* libs/gst/check/gstharness.c:
	* tests/check/libs/gstharness.c:
	  harness: Fix race for gst_harness_element_ref
	  In order for gst_harness_new_full to be MT-safe the increase and
	  decrease of HARNESS_REF must be MT-safe. This allows for creating
	  multiple harnesses from different threads wrapping the same element.
	  https://bugzilla.gnome.org/show_bug.cgi?id=754661

2015-08-05 09:59:39 +0200  Stian Selnes <stian@pexip.com>

	* libs/gst/check/gstharness.c:
	  harness: Allow-none for custom stress init func
	  It should be allowed to not have a function to initialize the user data
	  since it's often not necessary; it may already be initialized.
	  https://bugzilla.gnome.org/show_bug.cgi?id=754661

2015-09-06 09:58:09 +0100  Tim-Philipp Müller <tim@centricular.com>

	* docs/plugins/gstreamer-plugins.signals:
	  docs: remove signal that no longer exists from docs

2015-09-05 11:20:49 +0100  Tim-Philipp Müller <tim@centricular.com>

	* po/af.po:
	* po/az.po:
	* po/be.po:
	* po/bg.po:
	* po/ca.po:
	* po/cs.po:
	* po/da.po:
	* po/de.po:
	* po/el.po:
	* po/en_GB.po:
	* po/eo.po:
	* po/es.po:
	* po/eu.po:
	* po/fi.po:
	* po/fr.po:
	* po/gl.po:
	* po/hr.po:
	* po/hu.po:
	* po/id.po:
	* po/it.po:
	* po/ja.po:
	* po/lt.po:
	* po/nb.po:
	* po/nl.po:
	* po/pl.po:
	* po/pt_BR.po:
	* po/ro.po:
	* po/ru.po:
	* po/rw.po:
	* po/sk.po:
	* po/sl.po:
	* po/sq.po:
	* po/sr.po:
	* po/sv.po:
	* po/tr.po:
	* po/uk.po:
	* po/vi.po:
	* po/zh_CN.po:
	* po/zh_TW.po:
	  po: update for translated string changes

2015-09-05 11:18:27 +0100  Tim-Philipp Müller <tim@centricular.com>

	* tools/gst-launch.c:
	  tools: gst-launch: fix --exclude command line option
	  This has not worked (as in: crashed) since 2005, so
	  perhaps it should just be removed instead.

2015-08-31 12:07:10 +0100  Tim-Philipp Müller <tim@centricular.com>

	* plugins/elements/gstqueue2.c:
	  Revert "queue2: Process SEEKING query"
	  This caused problems with oggdemux when queue2 was
	  operating in queue mode and the souphttpsrc upstream
	  is not seekable because the server doesn't support
	  range requests. It would then still claim seekability
	  and then things go wrong from there.
	  This reverts commit 7b0b93dafe4ac547552cdb66ade5d8aa0405e7b4.
	  https://bugzilla.gnome.org/show_bug.cgi?id=753887

2015-08-29 20:14:44 +0200  Havard Graff <havard.graff@gmail.com>

	* libs/gst/check/gstharness.c:
	  harness: misc bugfixes
	  1. Get a list of pad templates from the element class, not the
	  factory. This allows us to interact with test-elements that does
	  not have a factory.
	  2. Use the pad_template_caps in caps-queries when caps is not set
	  explicitly on the pad. Not doing so is simply wrong, and prohibits
	  interactions with special templates used for testing.
	  https://bugzilla.gnome.org/show_bug.cgi?id=754193

2015-08-26 09:29:05 -0300  Thiago Santos <thiagoss@osg.samsung.com>

	* tests/check/gst/gstevent.c:
	  tests: event: fix build failure
	  gst/gstevent.c:250:5: error: ‘for’ loop initial declarations are only
	  allowed in C99 or C11 mode

2015-08-24 21:04:37 +0300  Vivia Nikolaidou <vivia@toolsonair.com>

	* gst/gstbin.c:
	* tests/check/gst/gstbin.c:
	  bin: Make sure we don't add/remove a bin to/from itself
	  Doing so would deadlock from trying to acquire the object lock twice
	  https://bugzilla.gnome.org/show_bug.cgi?id=754036

2015-08-21 14:28:48 -0700  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* libs/gst/base/gstbasetransform.c:
	  basetransform: Reconfigure before propose_allocation
	  There exist cases where a reconfigure event was propagated from
	  downstream, but caps didn't change. In this case, we would
	  reconfigure only when the next buffer arrives. The problem is that
	  due to the allocation query being cached, the return query parameters
	  endup outdated.
	  In this patch we refactor the reconfigurating code into a function, and
	  along with reconfiguring when a new buffer comes in, we also reconfigure
	  when a query allocation arrives.
	  https://bugzilla.gnome.org/show_bug.cgi?id=753850

2015-08-07 15:39:59 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* tests/check/libs/basesrc.c:
	  basesrc-test: Fix race testing segment update
	  As this test is using a short sleep (GST_USECOND, which is 10ms
	  in microsecond), sometimes that EOS event is received before the
	  loop in basesrc have run _do_seek() and pushed the update segment.
	  To solve this issue, we wait for the initial segment (and flush it)
	  then we wait for the second segment before sending EOS.
	  https://bugzilla.gnome.org/show_bug.cgi?id=753365

2015-08-19 11:46:07 +0200  Thibault Saunier <tsaunier@gnome.org>

	* scripts/gst-uninstalled:
	  bin: Add NLE to GST_PLUGIN_PATH

=== release 1.5.90 ===

2015-08-19 12:50:56 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* configure.ac:
	* docs/plugins/gstreamer-plugins.args:
	* docs/plugins/inspect/plugin-coreelements.xml:
	* gstreamer.doap:
	* win32/common/config.h:
	* win32/common/gstenumtypes.c:
	* win32/common/gstversion.h:
	  Release 1.5.90

2015-08-19 12:33:41 +0300  Sebastian Dröge <sebastian@centricular.com>

	* po/af.po:
	* po/az.po:
	* po/be.po:
	* po/bg.po:
	* po/ca.po:
	* po/cs.po:
	* po/da.po:
	* po/de.po:
	* po/el.po:
	* po/en_GB.po:
	* po/eo.po:
	* po/es.po:
	* po/eu.po:
	* po/fi.po:
	* po/fr.po:
	* po/gl.po:
	* po/hr.po:
	* po/hu.po:
	* po/id.po:
	* po/it.po:
	* po/ja.po:
	* po/lt.po:
	* po/nb.po:
	* po/nl.po:
	* po/pl.po:
	* po/pt_BR.po:
	* po/ro.po:
	* po/ru.po:
	* po/rw.po:
	* po/sk.po:
	* po/sl.po:
	* po/sq.po:
	* po/sr.po:
	* po/sv.po:
	* po/tr.po:
	* po/uk.po:
	* po/vi.po:
	* po/zh_CN.po:
	* po/zh_TW.po:
	  Update .po files

2015-08-19 11:17:29 +0300  Sebastian Dröge <sebastian@centricular.com>

	* po/zh_CN.po:
	  po: Update translations

2015-08-18 15:44:02 +0100  Tim-Philipp Müller <tim@centricular.com>

	* libs/gst/base/gstbaseparse.c:
	  baseparse: avoid tag list spam if upstream provides bitrate tags already
	  Explicitly keep track again whether upstream tags or parser tags
	  already contain bitrate information, and only force a tag update
	  for a bitrate if we are actually going to add the bitrate to the
	  taglist later. This fixes constant re-sending of the same taglist,
	  because upstream provided a bitrate already and we didn't add it,
	  so we didn't save the 'posted' bitrate, which would then in turn
	  again trigger the 'bitrate has changed too much, update tags'
	  code path. Fixes tag spam with m4a files for example.
	  https://bugzilla.gnome.org/show_bug.cgi?id=679768

2015-08-17 22:06:11 +0200  Stefan Sauer <ensonic@users.sf.net>

	* gst/gstdebugutils.c:
	  debugutils: bring the dot style a bit closer to what we use in the docs
	  Use round corners for bins and elements. Put sink pads on the left and src pads
	  on the right of elements.

2015-08-15 18:30:15 +0100  Tim-Philipp Müller <tim@centricular.com>

	* libs/gst/base/gstbaseparse.c:
	  baseparse: fix tag handling
	  In 0.10 there were no sticky events, and all tag events
	  sent would just be merged with the previously-received
	  tags. In 1.x we have sticky events, and the tags in the
	  tag event(s) should at all times carry the complete tags,
	  so we can't just push some tags and then just push tags
	  with just bitrates to update the bitrates, etc.
	  Instead we need to keep track of the upstream stream tags
	  received, of the tags set by the video decoder subclass,
	  and send an updated tag event with the combined tags
	  including our own bitrate tags (if applicable) whenever
	  the upstream tags, the subclass tags or any of our bitrates
	  change.
	  https://bugzilla.gnome.org/show_bug.cgi?id=679768

2015-08-16 10:15:56 +0100  Tim-Philipp Müller <tim@centricular.com>

	* docs/libs/gstreamer-libs-sections.txt:
	* libs/gst/base/gstbaseparse.c:
	* libs/gst/base/gstbaseparse.h:
	* win32/common/libgstbase.def:
	  baseparse: add API for subclass to set tags
	  This is needed so that we can do proper tag handling
	  all around, and combine the upstream tags with the
	  tags set by the subclass and any extra tags the
	  base class may want to add.
	  API: gst_base_parse_merge_tags()
	  https://bugzilla.gnome.org/show_bug.cgi?id=679768

2015-08-15 16:01:28 +0100  Tim-Philipp Müller <tim@centricular.com>

	* libs/gst/base/gstbaseparse.c:
	  baseparse: save upstream stream tags
	  We'll need those later.
	  https://bugzilla.gnome.org/show_bug.cgi?id=679768

2015-08-15 16:39:40 +0100  Tim-Philipp Müller <tim@centricular.com>

	* libs/gst/base/gstbaseparse.c:
	  baseparse: minor code simplification
	  Use gst_pad_peer_query_duration() and remove a few
	  unnecessary levels of indentation. Rest of code might
	  looks a bit questionable, but leave it as is for now.

2015-08-15 17:59:21 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/gstpad.c:
	  pad: Break sticky event array iterations if the type is bigger than the one we look for
	  Microoptimization we can do because the array is sorted by type.

2015-04-29 15:49:17 +0200  Edward Hervey <edward@centricular.com>

	* gst/gstpad.c:
	* gst/gstpad.h:
	* tests/check/gst/gstpad.c:
	  gstpad: Add a new GST_PROBE_HANDLED return value for probes
	  In some cases, probes might want to handle the buffer/event/query
	  themselves and stop the data from travelling further downstream.
	  While this was somewhat possible with buffer/events and using
	  GST_PROBE_DROP, it was not applicable to queries, and would result
	  in the query failing.
	  With this new GST_PROBE_HANDLED value, the buffer/event/query will
	  be considered as successfully handled, will not be pushed further
	  and the appropriate return value (TRUE or GST_FLOW_OK) will be returned
	  This also allows probes to return a non-default GstFlowReturn when dealing
	  with buffer push. This can be done by setting the
	  GST_PAD_PROBE_INFO_FLOW_RETURN() field accordingly
	  https://bugzilla.gnome.org/show_bug.cgi?id=748643

2015-08-15 13:25:35 +0200  Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>

	* gst/gstversion.h.in:
	  gstversion: Add missing include in .in file.

2015-08-11 00:35:21 +0200  Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>

	* gst/glib-compat.h:
	* gst/gstallocator.h:
	* gst/gstatomicqueue.h:
	* gst/gstcapsfeatures.h:
	* gst/gstclock.h:
	* gst/gstcompat.h:
	* gst/gstcontext.h:
	* gst/gstdeviceprovider.h:
	* gst/gstelementmetadata.h:
	* gst/gstmacros.h:
	* gst/gstmemory.h:
	* gst/gstmeta.h:
	* gst/gstpad.h:
	* gst/gstpluginloader.h:
	* gst/gstquark.h:
	* gst/gsttrace.h:
	  Headers: add missing includes.

2015-08-15 06:41:14 -0300  Thiago Santos <thiagoss@osg.samsung.com>

	* docs/gst/gstreamer-sections.txt:
	  docs: add the new pad accept-template flag to the docs

2015-08-14 22:44:50 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* docs/libs/gstreamer-libs-sections.txt:
	  docs: section entry missing for gst_direct_control_binding_new_absolute

2015-08-14 08:14:52 -0300  Thiago Santos <thiagoss@osg.samsung.com>

	* tests/check/gst/gstpad.c:
	  tests: pad: tests for accept-caps default handling
	  Check if all the default 4 accept-caps possibilities are working:
	  subset or intersect check and query-caps or template caps comparisons.
	  https://bugzilla.gnome.org/show_bug.cgi?id=753623

2015-08-14 07:51:07 -0300  Thiago Santos <thiagoss@osg.samsung.com>

	* gst/gstpad.c:
	* gst/gstpad.h:
	  pad: add GST_PAD_FLAG_ACCEPT_TEMPLATE
	  It will make the default accept-caps handler use the pad template
	  caps instead of the query-caps result to check if the caps is
	  acceptable. This is aligned with what the design docs says the
	  accept-caps should do (be non-recursive) and should be faster. It
	  is *not* enabled by default, though.
	  API: GST_PAD_FLAG_ACCEPT_TEMPLATE
	  API: GST_PAD_IS_ACCEPT_TEMPLATE
	  API: GST_PAD_SET_ACCEPT_TEMPLATE
	  API: GST_PAD_UNSET_ACCEPT_TEMPLATE
	  https://bugzilla.gnome.org/show_bug.cgi?id=753623

2015-08-14 11:10:03 +0200  Edward Hervey <bilboed@bilboed.com>

	* tests/check/generic/states.c:
	  check: Rename states unit test
	  Makes it easier to differentiate from other modules states unit test

2015-08-13 13:08:03 -0300  Thiago Santos <thiagoss@osg.samsung.com>

	* libs/gst/base/gstbasetransform.c:
	  basetransform: rework accept-caps
	  According to the design docs:
	  The ACCEPT_CAPS query is not required to work recursively, it can simply
	  return TRUE if a subsequent CAPS event with those caps would return
	  success.
	  So make it a shallow check instead of recursivelly check downstream.
	  https://bugzilla.gnome.org/show_bug.cgi?id=748635

2015-08-13 12:44:29 -0300  Thiago Santos <thiagoss@osg.samsung.com>

	* libs/gst/base/gstbasetransform.c:
	  basetransform: remove some dead code
	  Doesn't seem like it is going to get back to life anytime soon
	  Also removes a {} block that was likely used to keep the dead
	  code around.

2015-08-11 08:07:53 -0300  Thiago Santos <thiagoss@osg.samsung.com>

	* libs/gst/base/gstbasetransform.c:
	  basetransform: respect accept-caps intersect flag
	  GstPad has a flag for suggesting if the accept-caps
	  query should use intersect instead of the default
	  subset caps operation to verify if the caps would be
	  acceptable.
	  basetransform currently always uses the subset check and
	  this patch makes it honor the flag for using intersect
	  if it is set.
	  https://bugzilla.gnome.org/show_bug.cgi?id=748635

2015-08-12 13:12:38 +0900  Vineeth TM <vineeth.tm@samsung.com>

	* libs/gst/base/gstbasetransform.c:
	  basetransform: remove unreachable return statement
	  https://bugzilla.gnome.org/show_bug.cgi?id=753538

2015-08-11 11:09:24 +0100  Tim-Philipp Müller <tim@centricular.com>

	* tests/check/libs/.gitignore:
	  tests: ignore new harness test binary

2015-08-10 15:31:37 +0300  Vivia Nikolaidou <vivia@ahiru.eu>

	* gst/gstdatetime.c:
	* tests/check/gst/gstdatetime.c:
	  datetime: accept just a time as ISO 8601 string and use today's date then
	  If no date and only a time is given in gst_date_time_new_from_iso8601_string(),
	  assume that it is "today" and try to parse the time-only string. "Today" is
	  assumed to be in the timezone provided by the user (if any), otherwise Z -
	  just like the behavior of the existing code.
	  https://bugzilla.gnome.org/show_bug.cgi?id=753455

2015-07-24 00:41:57 +0200  Havard Graff <havard.graff@gmail.com>

	* docs/libs/gstreamer-libs-sections.txt:
	* libs/gst/check/Makefile.am:
	* libs/gst/check/gstharness.c:
	* libs/gst/check/gstharness.h:
	* tests/check/Makefile.am:
	* tests/check/libs/gstharness.c:
	  harness: add _set_forwarding function
	  To be able to disable the slightly "magic" forwarding of the
	  necessary events between the harnesses.
	  Also introduce a new test-suite for GstHarness, that documents the
	  feature, and should hopefully expand into documenting most of the
	  features the harness possesses.
	  https://bugzilla.gnome.org/show_bug.cgi?id=752746

2015-08-08 17:59:51 +0200  Wim Taymans <wtaymans@redhat.com>

	* gst/gstdevicemonitor.c:
	  devicemonitor: fix provider leak

2015-08-08 15:28:19 +0200  Edward Hervey <edward@centricular.com>

	* gst/gstpad.c:
	  pad: Fix previous commit
	  We want to get the caps query *result*

2015-07-16 18:56:00 +0200  Wim Taymans <wtaymans@redhat.com>

	* gst/gstdevicemonitor.c:
	* gst/gstdevicemonitor.h:
	* gst/gstdeviceprovider.c:
	* gst/gstdeviceprovider.h:
	* win32/common/libgstreamer.def:
	  deviceprovider: Add method to hide devices from a provider
	  Add methods to add/remove the providers that should be hidden by this
	  provider. Also make a method to get a list of hidden providers.
	  This makes it possible to have multiple systems monitor the same devices
	  and remove duplicates.
	  Add a property to see all devices, even duplicate ones from hidden
	  providers.

2015-08-08 14:42:52 +0200  Edward Hervey <edward@centricular.com>

	* gst/gstpad.c:
	  pad: get_allowed_caps() should go through both pads
	  The previous implementation was doing a direct call to the peer pad,
	  which resulted in query probes never being called on the original pad.
	  Instead of that, get the peer pad caps by using gst_pad_peer_query()
	  which will call probes in the expected fashion.

2015-08-07 10:08:21 +0900  Vineeth TM <vineeth.tm@samsung.com>

	* gst/gstvalue.c:
	  value: free caps during failure
	  While calling gst_value_deserialize_sample, if there is a failure
	  after caps is ref'ed, then caps is getting leaked. Hence checking for
	  caps in fail: goto condition and unref'ing it
	  https://bugzilla.gnome.org/show_bug.cgi?id=753338

2015-07-21 13:35:33 +0200  Thibault Saunier <tsaunier@gnome.org>

	* gst/gst_private.h:
	* gst/gstplugin.c:
	* gst/gstregistry.c:
	  registry: Add plugins to the registry we are loading and not default one
	  When running gst_registry_scan_plugin_file we were losing the
	  information about the registry being loaded and ended up adding the
	  plugin to the default registry which was not correct.
	  https://bugzilla.gnome.org/show_bug.cgi?id=752662

2015-08-05 15:51:27 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* libs/gst/base/gstbasesink.c:
	  basesink: Only drop buffer if their PTS is out of segment
	  As of now, even for stream completly inside segment, there is no
	  guarantied that the DTS will be inside the segment. Specifically
	  for H.264 with B-Frames, the first few frames often have DTS that
	  are before the segment.
	  Instead of using the sync timestamp to clip out of segment buffer,
	  take the duration from the start/stop provided by the sub-class, and
	  check if the pts and pts_end is out of segment.
	  https://bugzilla.gnome.org/show_bug.cgi?id=752791

2015-08-05 14:05:25 +0100  Luis de Bethencourt <luis@debethencourt.com>

	* libs/gst/check/gstharness.c:
	  harness: don't run code inside g_assert
	  Even though asserts can't be disabled in GstHarness, Coverity still
	  complains about running code inside them. Moving the code to outside the
	  g_asserts().
	  CID #1311326, #1311327, #1311328

2015-07-17 10:18:02 +0200  Wim Taymans <wtaymans@redhat.com>

	* gst/gstdevicemonitor.c:
	* gst/gstdevicemonitor.h:
	* win32/common/libgstreamer.def:
	  devicemonitor: get a list of currently monitored providers
	  Get a list of the currently monitored providers.

2015-08-02 17:38:14 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* gst/gstpad.c:
	  pad: fix invalid unref after IDLE probe on non-OK flow return
	  In case there is an IDLE probe fired from gst_pad_push_data and it
	  doesn't return GST_FLOW_OK, the code jumps to the probe_stopped
	  label which tries to unref the data object. However, at this point
	  the data object belongs downstream and must not be touched.
	  By setting data = NULL, the code skips this unref.
	  https://bugzilla.gnome.org//show_bug.cgi?id=753151

2015-08-04 20:08:04 +1000  Jan Schmidt <jan@centricular.com>

	* gst/gstbuffer.c:
	  buffer: Fix the name of the parentbuffermeta debug category.
	  Don't use 'glbufferrefmeta' as the debug category for the
	  parent buffer meta.

2015-08-04 13:45:09 +0900  Eunhae Choi <eunhae1.choi@samsung.com>

	* plugins/elements/gstqueue2.c:
	  queue2: not update upstream size with negative value
	  upstream_size can be negative but queue->upstream_size is unsigned type.
	  to get a chance to update queue->upstream_size in gst_queue2_get_range()
	  it should keep the default value.
	  https://bugzilla.gnome.org/show_bug.cgi?id=753011

2015-08-04 19:59:28 +1000  Jan Schmidt <jan@centricular.com>

	* gst/gstbuffer.c:
	* win32/common/libgstreamer.def:
	  buffer: Remove extra debug symbol from exports
	  Don't export the debug variable for the parent_buffer_meta.
	  This was accidentally exported and shouldn't be public

2015-08-04 00:11:24 +0200  Stefan Sauer <ensonic@users.sf.net>

	* plugins/elements/gstfilesink.c:
	  filesink: use GST_INFO_OBJECT for more detail
	  Helps to distiguish multiple filesinks.

2015-07-30 17:29:25 +0100  Tim-Philipp Müller <tim@centricular.com>

	* gst/gstinfo.h:
	  docs: info: remove 0.8 terminology from log level description
	  We don't "iterate" bins or pipelines any more.

2015-07-30 12:17:16 +0100  Tim-Philipp Müller <tim@centricular.com>

	* tests/check/libs/baseparse.c:
	  tests: baseparse: fix buffer leak in unit test
	  Fixes make check-valgrind

2015-07-28 21:14:22 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>

	* gst/gstsegment.h:
	  doc/seekflags: Fix cross references
	  This fixes miss-use of @ instead of % to refer to enumeration
	  values.

2015-07-28 22:30:54 +0100  Tim-Philipp Müller <tim@centricular.com>

	* docs/gst/gstreamer-sections.txt:
	  docs: add a few more new symbols and defines

2015-07-28 16:57:43 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>

	* plugins/elements/gstcapsfilter.h:
	  doc/capsfilter: Document filtering modes
	  This is documentation for the HTML documentation.

2015-07-28 16:50:55 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>

	* docs/plugins/gstreamer-plugins-sections.txt:
	* plugins/elements/gstfilesink.c:
	* plugins/elements/gstfilesink.h:
	  doc/filesink: Add BufferMode enumeration
	  This is purely for documentation purpose. This way the values will
	  show up in the HTML documentation.

2015-07-28 15:50:40 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>

	* libs/gst/check/gstharness.c:
	  doc/gsthardness: Fix typo in GstAllocationParams
	  It's not GstAllocatorParams but GstAllocationParams.

2015-07-28 15:46:09 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>

	* libs/gst/check/gstharness.c:
	  doc/gstharness: Remove unknown parameter
	  sink_elenment_name is not a parameter of gst_harness_add_sink_harness()
	  function, but still it show up in documentation.

2015-07-28 12:19:04 +0300  Sebastian Dröge <sebastian@centricular.com>

	* plugins/elements/gstcapsfilter.c:
	* plugins/elements/gstcapsfilter.h:
	  capsfilter: Only remember previous filter caps if they were actually used for something
	  If nobody ever saw the previous filter caps, nothing could've negotiated with
	  them and we can just pretend they never existed at all.

2015-07-28 12:16:12 +0300  Sebastian Dröge <sebastian@centricular.com>

	* plugins/elements/gstcapsfilter.c:
	  capsfilter: When switching caps change modes, forget all previous caps

2015-07-23 18:15:05 -0400  Olivier Crête <olivier.crete@collabora.com>

	* libs/gst/base/gstbasetransform.c:
	  basetransform: Return FLOW_FLUSHING if negotiation fails during shutdown
	  https://bugzilla.gnome.org/show_bug.cgi?id=752800

2015-07-22 18:55:29 -0400  Olivier Crête <olivier.crete@collabora.com>

	* libs/gst/check/gstharness.c:
	  harness: Fix indendation

2015-07-21 13:14:59 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* libs/gst/base/gstbasetransform.c:
	  basetransform: Avoid increasing query reference
	  gst_query_find_allocation_meta() requires the query to be
	  writable to work. This patch ensure avoids taking a reference
	  on the query, so we can now check if a certain allocation meta
	  is present.
	  https://bugzilla.gnome.org/show_bug.cgi?id=752661

2015-07-22 15:38:06 +0100  Tim-Philipp Müller <tim@centricular.com>

	* gst/gstbuffer.c:
	  docs: fix description of gst_buffer_extract_dup()
	  No GBytes involved.

2015-07-21 00:17:28 -0300  Thiago Santos <thiagoss@osg.samsung.com>

	* plugins/elements/gstconcat.c:
	  concat: dot not reset pad states too early
	  Resetting the flushing state of the pads at the end of the
	  PAUSED_TO_READY transition will make pads handle serialized
	  queries again which will wait for non-active pads and might
	  cause deadlocks when stopping the pipeline.
	  Move the reset to the READY_TO_PAUSED instead.
	  https://bugzilla.gnome.org/show_bug.cgi?id=752623

2015-07-20 16:18:06 +0200  Havard Graff <havard.graff@gmail.com>

	* docs/libs/gstreamer-libs-sections.txt:
	* libs/gst/check/Makefile.am:
	* libs/gst/check/gstharness.c:
	* libs/gst/check/gstharness.h:
	  harness: add functions for adding sub-harnesses directly
	  By introducing gst_harness_add_src_harness and gst_harness_add_sink_harness
	  we collect all sub-harness setup in one function, making the previous
	  sub-harness creation functions now calls these directly, and making it
	  much easier (and less error-prone) to add your own src or sink-harness
	  using the more generic harness-creation functions.

2015-07-17 17:44:52 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* libs/gst/base/gstbaseparse.c:
	  baseparse: Don't override gst_segment_do_seek()
	  This line has no purpose, clearly gst_segment_do_seek() is doing
	  the right job, also, having the start time (a timestamp) be that
	  same as time (the stream time) is quite odd.
	  https://bugzilla.gnome.org/show_bug.cgi?id=750783

2015-07-17 17:43:26 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* libs/gst/base/gstbaseparse.c:
	  baseparse: Fix extrapolation of seeksegment.stop
	  The stop shall be relative to start if extrapolated from the
	  duration.
	  https://bugzilla.gnome.org/show_bug.cgi?id=750783

2015-07-16 18:47:20 +0200  Wim Taymans <wtaymans@redhat.com>

	* gst/gstdevicemonitor.c:
	  devicemonitor: do start and stop outside of the lock
	  Release the monitor lock when calling the provider start/stop methods.
	  Because we release the lock now, We need to make sure we check the
	  cookie again and keep track of started and removed providers.

2015-07-16 18:43:06 +0200  Wim Taymans <wtaymans@redhat.com>

	* gst/gstdeviceprovider.c:
	* gst/gstdeviceprovider.h:
	  deviceprovider: small cleanups
	  Protect against wrong arguments.
	  Clean up the header file indentation.

2015-07-16 17:25:24 +0200  Wim Taymans <wtaymans@redhat.com>

	* gst/gstdevicemonitor.c:
	  devicemonitor: keep order of providers and devices
	  The deviceproviders are added to the array sorted by their rank. Make
	  sure we keep this ordering when removing a provider.
	  We use _prepend to collect the devices, use g_list_reverse to get the
	  devices in the right order; sorted by rank and in the same order as
	  returned by the provider.

2015-07-16 17:50:49 +0100  Tim-Philipp Müller <tim@centricular.com>

	* libs/gst/check/gstharness.c:
	  harness: fix indentation

2015-07-16 17:50:06 +0100  Tim-Philipp Müller <tim@centricular.com>

	* libs/gst/check/gstharness.c:
	  harness: fix pad template leak

2015-07-16 17:13:35 +0100  Tim-Philipp Müller <tim@centricular.com>

	* gst/gstplugin.c:
	  docs: drop reference to sourceforge mailing list adress

2015-07-16 17:53:40 +0200  Havard Graff <havard.graff@gmail.com>

	* libs/gst/check/gstharness.c:
	  harness: don't re-establish the harness sink and src pads
	  Given that the element has the possibility to have one, they should
	  already be there.
	  https://bugzilla.gnome.org/show_bug.cgi?id=752498

2015-07-13 11:03:13 +0200  Stian Selnes <stian@pexip.com>

	* libs/gst/check/gstharness.c:
	* libs/gst/check/gstharness.h:
	  harness: Improve detection of element type
	  The element flag does not indicate wether a bin should be tested as a
	  source or as a sink, eg. a bin with the sink flag may still have a
	  source pad and a bin with the source flag may have a sink pad. In this
	  case it is better to determine the element type by looking at the
	  available pads and pad templates.
	  Also rename srcpad and sinkpad where it actually represents
	  element_srcpad_name and element_sinkpad_name.
	  https://bugzilla.gnome.org/show_bug.cgi?id=752493

2015-07-13 11:10:49 +0200  Stian Selnes <stian@pexip.com>

	* libs/gst/check/gstharness.c:
	  harness: Forward sticky events to sink harness
	  Fixes issue where if a sink harness was added late the sticky events
	  would not be forwared.
	  https://bugzilla.gnome.org/show_bug.cgi?id=752494

2015-07-16 12:36:14 +0100  Tim-Philipp Müller <tim@centricular.com>

	* libs/gst/check/gstharness.h:
	  harness: make header nicer to read

2015-07-16 10:36:36 +0100  Tim-Philipp Müller <tim@centricular.com>

	* docs/gst/gstreamer-sections.txt:
	  docs: add new function to API docs

2015-07-15 18:21:13 +0200  Wim Taymans <wtaymans@redhat.com>

	* gst/gstdevice.c:
	* gst/gstdevice.h:
	* win32/common/libgstreamer.def:
	  device: add generic struct with properties
	  Add a generic structure to hold any additional properties about the
	  device.

2015-07-14 12:44:12 +0100  Tim-Philipp Müller <tim@centricular.com>

	* plugins/elements/gsttee.c:
	  tee: fix typo in allow-not-linked property description

2015-07-13 14:24:34 +0100  Tim-Philipp Müller <tim@centricular.com>

	* gst/gstbus.c:
	  docs: bus: mention main loop requirement in gst_bus_add_watch() docs

2015-03-18 16:05:34 +0530  Prashant Gotarne <ps.gotarne@samsung.com>

	* gst/gsttask.c:
	  task: add function guard for _set_lock() and fix guard for _join()
	  Should only access the object structure after checking
	  it's valid in gst_task_join().
	  https://bugzilla.gnome.org/show_bug.cgi?id=746385
	  https://bugzilla.gnome.org/show_bug.cgi?id=746431

2015-05-19 18:58:11 +0200  Philippe Normand <philn@igalia.com>

	* gst/gstprotection.c:
	  protection: implement meta transform function
	  Copy the GstMeta contents over to the new buffer.
	  https://bugzilla.gnome.org/show_bug.cgi?id=749590

2015-07-10 09:12:15 +0900  Vineeth TM <vineeth.tm@samsung.com>

	* libs/gst/base/gstbaseparse.c:
	  baseparse: estimate duration on EOS
	  For files which are smaller than 1.5 seconds, the duration
	  estimation does not happen. So the duration will always be
	  displayed as 0. Updating the duration on EOS when the estimation
	  has not happened already
	  https://bugzilla.gnome.org/show_bug.cgi?id=750131

2015-07-10 11:01:21 +0900  Hyunjun Ko <zzoon.ko@samsung.com>

	* libs/gst/base/gstadapter.c:
	  adapter: change log message properly
	  https://bugzilla.gnome.org/show_bug.cgi?id=752116
