# Generated by Makefile. Do not edit.

2019-05-29  Curtis Gedak <gedakc@gmail.com>

    ==========   gparted-1.0.0   ==========

2019-05-29  Curtis Gedak <gedakc@gmail.com>

    Update copyright years

2019-05-28  Claude Paroz <claude@2xlibre.net>

    Update French translation

2019-05-24  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Fix reading NTFS usage after resize (#57)
    
    After an NTFS file system has been resized the command GParted currently
    uses to read the file system usage fails like this:
    
        # ntfsinfo --mft /dev/sdb1
        Volume is scheduled for check.
        Please boot into Windows TWICE, or use the 'force' option.
        NOTE: If you had not scheduled check and last time accessed this volume
        using ntfsmount and shutdown system properly, then init scripts in your
        distribution are broken. Please report to your distribution developers
        (NOT to us!) that init scripts kill ntfsmount or mount.ntfs-fuse during
        shutdown instead of proper umount.
        Failed to open '/dev/sdb1'.
    
    Fix by added the '--force' flag as described in the error message.
    
    Closes #57 - NTFS Resize results in Partition Information Warning on
                 Refresh

2019-05-24  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Report errors correctly on failure to read NTFS usage (#57)
    
    GParted uses ntfsinfo to read the NTFS file system usage.  However when
    ntfsinfo fails with a non-zero exit status GParted reports stdout twice,
    rather than stdout and stderr.  Correct this.
    
    Closes #57 - NTFS Resize results in Partition Information Warning on
                 Refresh

2019-05-26  Anders Jonsson <anders.jonsson@norsjovallen.se>

    Update Swedish translation

2019-05-26  Anders Jonsson <anders.jonsson@norsjovallen.se>

    Update Swedish translation

2019-05-25  Trần Ngọc Quân <vnwildman@gmail.com>

    Updated Vietnamese translation
    
    Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com>

2019-05-22  Jiri Grönroos <jiri.gronroos@iki.fi>

    Update Finnish translation

2019-05-22  Claude Paroz <claude@2xlibre.net>

    Update French translation

2019-05-22  Rafael Fontenelle <rafaelff@gnome.org>

    Update Brazilian Portuguese translation

2019-05-22  Sveinn í Felli <sv1@fellsnet.is>

    Update Icelandic translation

2019-05-03  Luca Bacci <luca.bacci982@gmail.com>

    Set the xalign property for Gtk::Labels (!40)
    
    With the same case as from the previous commit, the very long "Mounted
    on ..." text is now wrapped, but the text may not be left justified.
    Slowly adjust the dialog width and see how the text wrapping is updated
    to fit the size adjustment but the text is centred rather than left
    justified.
    
    This is because setting the halign property to Gtk::ALIGN_START does not
    guarantee left alignment of text for wrapped or ellipsized Gtk::Labels.
    
    Use the xalign property instead.
    
    To set the xalign property there is a method in the GtkMisc (Gtk::Misc)
    base class:
    
      gtk_misc_set_alignment (Gtk::Misc::set_alignment)
    
    However, GtkMisc (Gtk::Misc) was deprecated in Gtk 3.14 (Gtkmm 3.14)
    and in Gtk 3.16 (gtkmm 3.16) set_alignment() was replaced with the
    introduction of two new methods:
    
      gtk_label_set_xalign (Gtk::Label::set_xalign)
      gtk_label_set_yalign (Gtk::Label::set_yalign)
    
    Add a check for Gtkmm method Gtk::Label::set_xalign() in configure.ac
    and use it when available.
    
    References:
    
    [1] Gtk3 Reference Documentation - gtk_misc_set_alignment()
        https://developer.gnome.org/gtk3/stable/GtkMisc.html#gtk-misc-set-alignment
        "gtk_misc_set_alignment has been deprecated since version 3.14 and
        should not be used in newly-written code. Use GtkWidget's alignment
        ("halign" and "valign") and margin properties or GtkLabel's
        "xalign" and "yalign" properties."
    
    [2] Gtkmm 3.16 Gtk::Misc Class Reference, set_alignment() method
        https://developer.gnome.org/gtkmm/3.16/classGtk_1_1Misc.html#a52b2675874cf46a3097938756b9fe9e8
    
    [3] GNOME BugZilla - EmptyBoxes: instructions_label's alignment is off
        https://bugzilla.gnome.org/show_bug.cgi?id=735841
    
    [4] Gtk commit from 2014-09-16:
        GtkLabel: add x/yalign properties
        https://gitlab.gnome.org/GNOME/gtk/commit/d39424fc
    
    [5] Gtk3 Reference Documentation - gtk_label_set_xalign()
        https://developer.gnome.org/gtk3/stable/GtkLabel.html#gtk-label-set-xalign
    
    [6] Gtkmm 3.16 Gtk::Label Class Reference, set_xalign() method
        https://developer.gnome.org/gtkmm/3.16/classGtk_1_1Label.html#acee7d4e87d7cc14080a7b8ded5f84e5e
    
    Closes !40 - Limit wrapping labels

2019-05-01  Luca Bacci <luca.bacci982@gmail.com>

    Set a default max_width_chars for wrapping Gtk::Labels (!40)
    
    Opening the Partition Information dialog for a file system mounted on a
    very long mount point, or on openSUSE which mounts the OS from 10 btrfs
    subvolumes from the same partition, will cause the dialog to be very
    wide as the "Mounted on ..." text is not wrapped.
    
    Back in Gtk2, when width_chars / max_width_chars were not set, wrapping
    labels had a default width beyond which text wrapped onto a new line
    [1].
    
    For Gtk3 this default width was first reworked a bit [2], and then was
    removed for the very early Gtk3 3.0.10 release [3].
    
    It is recommended that applications explicitly set default values,
    otherwise wrapping labels never wrap when requesting their natural
    allocation.
    
    References:
    
    [1] Gtk 2.24.32 source code - gtk/gtklabel.c:2975
        https://gitlab.gnome.org/GNOME/gtk/blob/2.24.32/gtk/gtklabel.c#L2975
            "This long string gives a good enough length for any line to
            have."
    
    [2] Gtk commit from 2010-04-21:
        https://gitlab.gnome.org/GNOME/gtk/commit/680d7762baabb71aa77aeec793e3c70a2013d3b8
        Make sure not to base the minimum size on "max-width-chars", only
        the natural size.
            "This string is just about long enough."
    
    [3] Gtk commit from 2011-04-17:
        https://gitlab.gnome.org/GNOME/gtk/commit/c8ce1106c11361f8b47dd4e9a08db571c7d66d82
        label: Don't try to guess a label's size
    
        People should use window default sizes or label
        width-chars/max-width-chars to find the ideal layout for a label
        instead of relying on magic.
    
    Closes !40 - Limit wrapping labels

2019-05-01  Luca Bacci <luca.bacci982@gmail.com>

    Request natural width in Gtk::ScrolledWindows for Gtk >= 3.22 (!39)
    
    Before Gtk 3.22 GtkScrolledWindow propagated natural size to its
    Children and so on to descendants.  In Gtk 3.22 this was changed to
    always request the minimum size.  This was done because it is believed
    to be a safer default (gives a better behaviour) in case of dynamic
    content inside the scrolled window, that is, content that may change
    allocated size. [1][2][3]
    
    When the scrolled window content is not dynamic the natural size is
    preferable because it gives a better looking layout and without any
    downside.
    
    In the case of GParted content which is not dynamic, so request the
    scrolled windows to allocate children at natural sizes for Gtk >= 3.22.
    
    The benefits of natural size allocation are evident in presence of
    wrapping labels (for example inside the "Partition Info" dialog), that
    with the minimum size request likely end up taking a very small width.
    
    References:
    
    [1] Gtk commit from 2016-08-31:
        GtkScrolledWindow: Make propagation of natural child sizes optional
        https://gitlab.gnome.org/GNOME/gtk/commit/0984d1622d022bf67207f985f7842b6299818e20
        "Making propagation of child natural sizes mandatory (or default,
        even) was evidently a mistake as this causes dynamic content in a
        scrolled window to resize it's parent when the scrolled window is
        competing for space with an adjacent widget."
    
    [2] Gtk 3.22 Reference Documentation -
        gtk_scrolled_window_set_propagate_natural_width
        https://developer.gnome.org/gtk3/3.22/GtkScrolledWindow.html#gtk-scrolled-window-set-propagate-natural-width
    
    [3] Gtkmm 3.24 Gtk::ScrolledWindow Class Reference,
        set_propagate_natural_width() method
        https://developer.gnome.org/gtkmm/3.24/classGtk_1_1ScrolledWindow.html#a2d4cb945688ecb8739efd70b18742779
    
    [4] Gtkmm 3.21.6 NEWS
        https://gitlab.gnome.org/GNOME/gtkmm/blob/3.21.6/NEWS
        "ScrolledWindow: Added get/set_propagate_natural_height/width() and
        the properties."
    
    Closes !39 - Always request natural size inside Gtk::ScrolledWindow

2019-05-10  Rafael Fontenelle <rafaelff@gnome.org>

    Update Brazilian Portuguese translation

2019-05-01  Yuras Shumovich <shumovichy@gmail.com>

    Update Belarusian translation

2019-04-30  Seong-ho Cho <shcho@gnome.org>

    Update Korean translation

2018-05-09  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Replace deprecated get_vbox() with get_content_area() (!25)
    
    get_vbox() was deprecated in gtkmm 3.1.6 [1][2].  Switch to the
    get_content_area() replacement.  Note that GParted already requires
    gtkmm >= 3.4 as set in configure.ac.
    
    [1] Gtkmm 3.1.6 NEWS
        https://gitlab.gnome.org/GNOME/gtkmm/blob/3.1.6/NEWS
        "Dialog: Deprecate get_vbox(), replacing with get_content_area(),
        to match the C function name."
    
    [2] Gtkmm commit from 2011-06-13:
        Dialog: Deprecate get_vbox(), replacing with get_content_area().
        https://git.gnome.org/browse/gtkmm/commit/?id=5ccc289fa8e9b046c07f5ea234f5ced8c6356fc1
    
    Closes !25 - Modern Gtk3 - part 1

2019-03-13  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Grid for Dialog_Partition_Info (!25)
    
    Gtk::Table was deprecated in Gtk 3.4.0.  Replace with Gtk::Grid.
    
    This commit makes the change for Dialog_Partition_Info.
    
    Closes !25 - Modern Gtk3 - part 1

2019-03-07  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Grid for Win_GParted pt2 (!25)
    
    Gtk::Table was deprecated in Gtk 3.4.0.  Replace with Gtk::Grid.
    
    This commit makes the change for Win_GParted / pt2.
    
    Closes !25 - Modern Gtk3 - part 1

2019-03-06  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Grid for Win_GParted pt1 (!25)
    
    Gtk::Table was deprecated in Gtk 3.4.0.  Replace with Gtk::Grid.
    
    This commit makes the change for Win_GParted / pt1.
    
    Closes !25 - Modern Gtk3 - part 1

2019-03-06  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Grid for Dialog_Base_Partition (!25)
    
    Gtk::Table was deprecated in Gtk 3.4.0.  Replace with Gtk::Grid.
    
    This commit makes the change for Dialog_Base_Partition.
    
    Closes !25 - Modern Gtk3 - part 1

2019-03-06  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Grid for Dialog_Partition_New (!25)
    
    Gtk::Table was deprecated in Gtk 3.4.0 [1].  Replace with Gtk::Grid.
    Note that the meaning of the attachment parameters changed between
    Gtk::Table::attach() [2] from left, right, top, bottom and
    Gtk::Grid::attach() [3] to left, top, width, height.
    
    This commit makes the change for Dialog_Base_Partition.
    
    [1] Gtkmm 3.4 NEWS file (actually first included in gtkmm 3.3.2
        unstable)
        https://gitlab.gnome.org/GNOME/gtkmm/blob/3.4.0/NEWS#L162
            * Deprecate Gtk::Table in favour of Gtk::Grid.
    
    [2] Gtkmm 3.4 Gtk::Table Class Reference, attach() method
        https://developer.gnome.org/gtkmm/3.4/classGtk_1_1Table.html#a28b6926e68337a51ba29f2b4dd69f087
            Deprecated: 3.4: Use Gtk::Grid::attach() with Gtk:Grid.  Note
            that the attach argument differ between those two function.
    
    [3] Gtkmm 3.4 Gtk::Grid Class Reference, attach() method
        https://developer.gnome.org/gtkmm/3.4/classGtk_1_1Grid.html#a9c425e95660daff60a77fc0cafc18115
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Separator (!25)
    
    Gtk::HSeparator was deprecated in Gtkmm 3.2.  Replace with plain
    Gtk::Separator.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Paned (!25)
    
    Gtk::HPaned and Gtk::VPaned were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Paned.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for Dialog_Progress (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for Dialog_Progress.cc.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for Dialog_Rescue_Data (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for Dialog_Rescue_Data.cc.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for DialogPasswordEntry (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for DialogPasswordEntry.cc.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for Dialog_Partition_Name (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for Dialog_Partition_Name.cc.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for Dialog_FileSystem_Label (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for Dialog_FileSystem_Label.cc.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for DialogFeatures (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for DialogFeatures.cc.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for Dialog_DiskLabel (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for Dialog_DiskLabel.cc.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for Dialog_Partition_Info (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for Dialog_Partition_Info.{h,cc}.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for Dialog_Base_Partition (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for Dialog_Base_Partition.{h,cc}.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for HBoxOperations (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2.  Replace with
    plain Gtk::Box.
    
    This commit makes the change for HBoxOperations.{h,cc}.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-27  Luca Bacci <luca.bacci982@gmail.com>

    Use Gtk::Box for Win_GParted (!25)
    
    Gtk::HBox and Gtk::VBox were deprecated in Gtkmm 3.2 [1].  Replace with
    plain Gtk::Box.
    
    This commit makes the change for Win_GParted.{h,cc}.
    
    [1] Gtkmm 3.2.0 NEWS file (actually first included in gtkmm 3.1.6
        unstable)
        https://gitlab.gnome.org/GNOME/gtkmm/blob/3.2.0/NEWS#L91
            Gtk:
            * All H* or V* specialized classes have been deprecated, to
              match the deprecations in the GTK+ C API.  You should now
              set the orientation instead.
              This includes HBox, VBox, HButtonBox, VButtonBox, HPaned,
              VPaned, HScale, VScale, HSeparator, VSeparator, HScrollbar and
              VScrollbar.
    
    Closes !25 - Modern Gtk3 - part 1

2019-02-20  Luca Bacci <luca.bacci982@gmail.com>

    Use Gdk::RGBA (!25)
    
    The Gdk::RGBA data type was introduced to replace Gdk::Color in
    Gtkmm 3.0 [1], with Gdk::Color being deprecated in Gtkmm 3.10 [2].
    
    With this commit we make the change to Gdk::RGBA data type which is the
    modern replacement to Gdk::Color.  Gdk::RGBA can be used almost as a
    drop in replacement because it keeps most of the Gdk::Color interface.
    
    Also, this commit removes the C Gtk call introduced during the
    port-to-gtk3 patchset by commit:
        53793527668a344fe54ceb61a1afdc39c24c5c45
        repare-for-gtk3: Prepare for removal of Gtk::Widget::modify_fg() (#7)
    
    [1] Gtkmm 3.0.1 NEWS file
        https://gitlab.gnome.org/GNOME/gtkmm/blob/3.0.1/NEWS#L48
            * RGBA replaces Color, though Color still exists because it is
              used by TextView.  We hope to deprecated Color completely in
              gtkmm 3.2.
    
    [2] Gtkmm 3.10.0 NEWS file
        https://gitlab.gnome.org/GNOME/gtkmm/blob/3.10.0/NEWS#L127
            Gdk:
            * Deprecate Color.
    
    Closes !25 - Modern Gtk3 - part 1

2019-04-20  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Update includes in DialogFeatures.h and .cc
    
    Mostly add, but also remove, #includes so both DialogFeatures.h and .cc
    include exactly the header files each needs to get the definitions they
    use.
    
    Header file #include guards are there to specifically enable this.

2019-04-19  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Rename method to DialogFeatures::load_one_filesystem()
    
    To better reflect that it is loading the supported actions for one file
    system into the treeview, just like it's parent load_filesystems() is
    initiating the loading for all the file systems.

2019-04-19  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Fix available Partition menu options not being updated on rescan (!38)
    
    Select a partition and look at the available actions in the Partition
    menu.  Then add or remove some commands which that particular file
    system uses and rescan to detect those changes.  Open the Partition menu
    again.  It doesn't reflect the changes of supported actions seen in the
    File System Support dialog.  Select a different partition and then
    select the original partition again.  Now the available actions in the
    Partition menu reflect the changes of supported actions.
    
    Have been testing by adding and removing /sbin/e2label to add and
    remove EXT2/3/4 file system labelling support just because that feature
    has existed for a very long time and EXT2/3/4 are displayed near the top
    of the File System Support dialog.  Tested this minor issue existed as
    far back as GParted 0.3.7.
    
    Fix by simply also refreshing the valid operations to update the
    Partition menu after updating the found file system specific commands.
    
    Closes !38 - Fixes for minor issues with File System Support rescanning

2019-04-17  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Fix File System Support dialog not showing changes after rescan (!38)
    
    Open the File System Support dialog, either add or remove some file
    system specific commands used by GParted and press the
    [Rescan For Supported Actions] button.  The supported actions don't
    change.  However after just closing and reopening the dialog, the
    supported actions do reflect the added or removed file system specific
    commands.
    
    Bisected to this commit:
        4d6d46466478f656ce2ebb3c6b5a88cf0657667f
        Display "other" in the File System Support dialog (!13)
    
    The problem is that commit made a subset copy of the
    GParted_Core::FILESYSTEMS vector, obtained from get_filesystems(), so
    when the rescan ran and the FILESYSTEMS vector was updated with new
    supported actions, the dialog still displayed the original subset copy,
    so didn't reflect the changed supported actions.
    
    Fix by passing a reference to the GParted_Core::FILESYSTEMS vector,
    obtained from get_filesystems(), and perform the necessary filtering
    inside the dialog, like before the above faulty commit.  Additionally
    finding and adding "other" file system to the end of the list.
    
    Closes !38 - Fixes for minor issues with File System Support rescanning

2019-04-15  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Stop checking for 'ntfslabel --new-serial' support
    
    The oldest supported distributions have these versions of ntfs-3g /
    ntfsprogs.
    
      Distro             EOL        ntfs-3g / ntfsprogs
    - Debian 8           2020-Jun   2014.2.16AR.2
    - RHEL / CentOS 7    2024-Jun   2017.3.23
    - Ubuntu 14.04 LTS   2019-Apr   2013.1.13AR.1
    
    The oldest version of ntfs-3g / ntfsprogs on Ubuntu 14.04 LTS includes
    support for the --new-serial option.
    
        $ ntfslabel -V
    
        ntfslabel v2013.1.13AR.1 (libntfs-3g) - Display, or set, the label for an NTFS Volume.
    
        $ ntfslabel --help | grep -- --new-serial
                --new-serial   Set a new serial number
    
    Therefore it is no longer necessary to check for this option as it is
    always available.  The worst case scenario is that some how an old
    version of ntfslabel is used which doesn't support this option.  In such
    a case GParted goes from not supporting changing the UUID to claiming
    support, but presumably it would fail with an error reporting unknown
    option when applied.  Arguably better from an end user support point of
    view.

2019-04-14  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Consolidate common if have ntfsresize command conditions

2019-04-14  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Switch to faster ntfsinfo to read NTFS usage (#47)
    
    A user reported GParted was slow to refresh and timing ntfsresize to
    query his file systems found that it was taking 4.7 seconds and 9.2
    seconds for sizes 31.7 GiB and 49 GiB NTFS file systems respectively.
    Almost 14 seconds just to read the usage.
    
    Created a 4 GiB NTFS and filled it with as many 4 KiB files as possible,
    just over 800,000 files.
    
        # df -k /mnt/2
        Filesystem     1K-blocks    Used Available Use% Mounted on
        /dev/sdb2        4194300 4193860       440 100% /mnt/2
        # df -i /mnt/2
        Filesystem     Inodes  IUsed IFree IUse% Mounted on
        /dev/sdb2      819640 808591 11049   99% /mnt/2
    
    Testing perform of ntfsresize:
    
        # time ntfsresize --info --force --no-progress-bar /dev/sdb2 | \
        > egrep 'Current volume size|resize at|Cluster size'
        Cluster size       : 4096 bytes
        Current volume size: 4294963712 bytes (4295 MB)
        You might resize at 4294516736 bytes (freeing 450560 bytes).
    
        real    0m5.231s
        user    0m2.072s
        sys     0m3.014s
    
    Computation of figures:
        Clusters per volume = 4294963712 / 4096 = 1048575.125
        Free clusters = (4294963712 - 4294516736) / 4096 = 109.125
    
    Testing performance of ntfscluster, as used before this commit [1] from
    GParted 0.3 in 2006:
    
        # time ntfscluster --force /dev/sdb2 | \
        > egrep 'bytes per cluster|bytes per volume|clusters per volume|clusters of free space'
        ...
        bytes per cluster       : 4096
        bytes per volume        : 4294963200
        clusters per volume     : 131071
        clusters of free space  : 110
    
        real    0m4.243s
        user    0m1.629s
        sys     0m2.587s
    
    Note that the clusters per volume figure reported by ntfscluster is
    wrong.  4294963200 / 4096 = 1048575, not 131071.
    
    Testing performance using ntfsinfo:
    
        # time ntfsinfo --mft /dev/sdb2 | \
        egrep 'Cluster Size|Volume Size in Clusters|Free Clusters'
                Cluster Size: 4096
                Volume Size in Clusters: 1048575
                Free Clusters: 110 (0.0%)
    
        real    0m0.022s
        user    0m0.012s
        sys     0m0.018s
    
    Repeating the above tests while also using 'btrace /dev/sdb2' and Ctrl-C
    around each test via a separate terminal, reports these numbers of I/Os
    being performed:
      Command      Read requests   Read bytes
    - ntfsresize           2,695     1116 MiB
    - ntfscluster          2,685     1116 MiB
    - ntfsinfo                13     2208 KiB
    No wonder that ntfsresize and ntfscluster take a long time, they read
    just over 1 GiB of data from the 4 GiB file system, where as ntfsinfo
    only reads just over 2 MiB.
    
    Switch to using ntfsinfo to report file system usage.
    
    [1] 9d956594d6acf0d983ae9105df2f3772194a5404
        replaced ntfscluster with ntfsresize (see #350789)
    
    Closes #47 - GParted is slow refreshing NTFS file systems

2019-04-17  Daniel Mustieles <daniel.mustieles@gmail.com>

    Updated Spanish translation

2019-04-17  Daniel Mustieles <daniel.mustieles@gmail.com>

    Update Spanish translation

2019-04-13  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Prefer enum to string comparison in set_partition_type()

2019-04-13  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Stop trying unneeded alternative libparted linux-swap names
    
    With that same commit in parted 1.9 [1], libparted only recognised these
    linux-swap names via deprecated aliases:
        linux-swap(old)
        linux-swap(new)
    but does accept this name as a current alias:
        linux-swap
    for:
        linux-swap(v1)
    
    Demonstration:
        # parted -v
        parted (GNU parted) 2.1
        ...
    
        # parted /dev/sdc mkfs yes 1 "linux-swap(new)" unit s print
        ...
        [0] filesys.c:148 (ped_file_system_type_get(): File system alias linux-swap(new) is deprecated
        ...
        Number  Start  End       Size      Type     File system     Flags
         1      2048s  2099199s  2097152s  primary  linux-swap(v1)
    
        # parted /dev/sdc mkfs yes 1 "linux-swap" unit s print
        ...
        Number  Start  End       Size      Type     File system     Flags
         1      2048s  2099199s  2097152s  primary  linux-swap(v1)
    
    Again as GParted now requires libparted 2.2 or later:
    1) Stop using alternative "linux-swap(new)" name as that is deprecated
       by libparted.
    2) Also stop using alternative "linux-swap(v1)" name as that code is
       never used because libparted recognised the GParted "linux-swap"
       name as a current alias.
    
    [1] http://git.savannah.gnu.org/cgit/parted.git/commit/?id=cfafa4394998a11f871a0f8d172b13314f9062c2
        Rationalise linux-swap fs names, and add a "linux-swap" alias

2019-04-13  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Stop recognising retired libparted linux-swap names
    
    With this commit in parted 1.8.3 [1], libparted changed from reporting
    the name of Linux swap as:
        linux-swap
    to reporting either:
        linux-swap(old)
        linux-swap(new)
    Later with this commit in parted 1.9 [2], libparted stopped reporting
    those names and reported these instead:
        linux-swap(v0)
        linux-swap(v1)
    
    Demonstration:
        # mkswap /dev/sdc1
        Setting up swapspace version 1, size = 1048572 KiB
        no label, UUID=a2010834-003d-4bf2-9e94-58383fe20a26
        # blkid /dev/sdc1
        /dev/sdc1: UUID="a2010834-003d-4bf2-9e94-58383fe20a26" TYPE="swap"
        # parted -v
        parted (GNU parted) 2.1
        ...
        # parted /dev/sdc unit s print
        ...
        Number  Start  End       Size      Type     File system     Flags
         1      2048s  2099199s  2097152s  primary  linux-swap(v1)
    
    As GParted now requires libparted 2.2 or later [3], remove recognition
    for those no longer libparted reported linux-swap names.  Note that the
    "swap" name is reported by blkid.
    
    [1] http://git.savannah.gnu.org/cgit/parted.git/commit/?id=98a53fd115ca012edf226525b8d4be628454f99e
        Enable support for swsusp partitions, and the ability to
        differentiate between old and new versions of linux-swap partitions.
        Changed the swap_init signature and removed extra ped_geometry_read
        from _swap*_open.
    
    [2] http://git.savannah.gnu.org/cgit/parted.git/commit/?id=cfafa4394998a11f871a0f8d172b13314f9062c2
        Rationalise linux-swap fs names, and add a "linux-swap" alias
    
    [3] 8df975c7d1b5d69897f286bfc5574c51cf58c9d5
        Increase minimum required libparted to 2.2 (!22)

2019-04-13  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Set partition type when formatting to cleared (!36)
    
    Formatting a partition to cleared over the top of LVM2 PV leaves the
    "lvm" flag set on the partition; where as formatting with an actual file
    system over the top of an LVM2 PV clears the "lvm" flag.  This is true
    for both MSDOS and GPT partitioned drives.
    
    Fix by setting the partition type when formatting to cleared too.
    
    Closes !36 - Set partition type when clearing partition contents

2019-04-15  Stas Solovey <whats_up@tut.by>

    Update Russian translation

2019-04-14  Piotr Drąg <piotrdrag@gmail.com>

    Update Polish translation

2019-04-04  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Remove unnecessary #include from GParted_Core.cc

2019-04-10  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Rename Dialog_Progress member variable to m_curr_op
    
    Having a member variable named 't' which is used to share state in a
    Dialog_Progress object between on_signal_show() and on_cancel() methods
    is horrible.  Rename to something more meaningful.
    
    Also initialise m_curr_op in the constructor's initialisation list,
    rather than later when first used in on_signal_show().  Not strictly
    required, but avoids this POD (Plain Old Data) member variable being
    undefined in the Dialog_Progress object between construction and when
    on_signal_show() previously assigned to it for the first time and
    started using it.
    
    * C++ FAQ / Should my constructors use "initialization lists" or
      "assignment"?
      https://isocpp.org/wiki/faq/ctors#init-lists

2019-04-10  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Rename for loop counter variables to normative 'i' in Dialog_Progress
    
    Several for loops created counter variable t, hiding member variable of
    the same name.  Rename those loop counter variables to the normative
    name 'i'.
    
    * Why do most of us use 'i' as a loop counter variable?
      https://softwareengineering.stackexchange.com/questions/86904/why-do-most-of-us-use-i-as-a-loop-counter-variable

2019-04-07  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Use CSS to turn off table borders once in saved details HTML

2019-04-07  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Rename method to Dialog_Progress::write_operation_details()
    
    And update comment about replacing '\n' to reflect what the code
    actually does.

2019-04-05  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Additionally write partition information to saved details (#639176)
    
    Bug 639176 - Save partition layout to gparted_details.htm

2019-04-05  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Write starting device overview information to saved details (#639176)
    
    Writes the starting device overview information of all known devices to
    the top of the saved details HTML.  This is so that hopefully we don't
    need to additionally ask users for their disk layouts via 'fdisk -l',
    'parted print' and 'lsblk' when the saved details file is provided.
    
    Also moves the equals separators "==================" from below to
    above each operation so the each section is separated.
    
    Bug 639176 - Save partition layout to gparted_details.htm

2019-03-27  Luca Bacci <luca.bacci982@gmail.com>

    Ensure icon sizes (#39)
    
    Some icon themes only provide large icons for stock items.  This can
    cause problems like overly large icons appearing in the GParted UI.
    Found on Kubuntu 16.04 LTS with default breeze icon theme.
    
    Be compatible with these icon themes by forcing scaling of stock icons
    to the requested size.
    
    Icons are used either by Gtk::Image widgets, or Gtk::CellRendererPixbuf
    objects for comboboxes/treeviews.  For Gtk::Image widgets we add
    Utils::mk_image() that constructs Gtk::Image widgets and then sets the
    pixel-size property.  For Gtk::CellRendererPixbuf we add
    Utils::mk_pixbuf() that first loads a Gdk::Pixbuf and then scales if
    needed.
    
    Closes #39 - After GTK3 port icons are too big on KDE

2019-03-31  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Update distro specific package installation instructions
    
    - Back in Fedora 22 the distribution switched from using yum to dnf for
      package installation, while CentOS / RHEL continues to use yum.
      Separate out package instructions.
    
    - Update package dependencies for what is required on current versions
      of the documented distributions.

2019-03-31  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Also write "Root privileges are required ..." message to stderr (!34)
    
    To further help in diagnosing root authorisation issues by reporting the
    error message to the terminal too.  Also set a failure exit status when
    terminating with this error.
    
    Example:
        $ ./gpartedbin
        GParted 0.33.0-git
        configuration --enable-online-resize
        libparted 3.2
        Root privileges are required for running GParted
        $ echo $?
        1
    
    Closes !34 - Display more version and configuration information

2019-03-31  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Print new info before "Root privileges are required ..." dialog (!34)
    
    So that the new version and configuration information is displayed even
    if the gpartedbin executable is run as a non-root user.  To help with
    diagnosing root authorisation issues with the gparted shell wrapper
    script.
    
    Closes !34 - Display more version and configuration information

2019-03-30  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Remove now unused Dialog_Progress::signal_get_libparted_version (!34)
    
    ... and related GParted_Core::get_libparted_version() method.
    
    Closes !34 - Display more version and configuration information

2019-03-30  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Report the same information into saved operation details (!34)
    
    For consistency save the 3 same lines of information into the saved
    operation details.  None of the new 3 lines are subject to translation.
    As this information is really for our benefit when supporting users
    leaving them as English is OK.  Also "GParted" and "Libparted", as
    previously used, are proper nouns so they were never changed as part of
    any language translation.  See with:
        egrep -r '"(GParted|Libparted)"' po/
    
    Closes !34 - Display more version and configuration information

2019-03-30  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Display more version and configuration info to stdout when starting (!34)
    
    So that we might get more information from users when helping them.
    Starting GParted from the command line now looks like this:
        # ./gpartedbin
        GParted 0.33.0-git
        configuration --enable-online-resize
        libparted 3.2
    
    Closes !34 - Display more version and configuration information

2019-03-09  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Rename local variable to meaningful benchmark_copysize

2019-03-29  Mike Fleetwood <mike.fleetwood@googlemail.com>

    Stop trying to access device '/dev/mapper/No RAID disks' (#786031)
    
    Running GParted on AltLinux with dmraid installed but with no configured
    RAID arrays produces this error:
        # gparted
        ...
        Could not stat device /dev/mapper/No RAID disks - No such file or directory.
    
    Most distributions use dmraid 1.0.0.rc16 which reports no raid disks
    like this:
        # dmraid -sa -c
        no raid disks
        # echo $?
        1
    
    However AltLinux had the slightly older version, dmraid 1.0.0.rc14,
    which reported no raid disks like this:
        # dmraid -sa -c
        No RAID disks
        # echo $?
        0
    
    So because dmraid 1.0.0.rc14 reported success, exit status 0, and the
    "No RAID disks" message was not in lower case, that text was considered
    a disk device in a DMRaid array.  Fix by checking for "no raid disks" in
    any case.
    
    Bug 786031 - Could not stat device /dev/mapper/No RAID disks - No such
                 file or directory
