=== release 1.18.3 ===

2021-01-13 21:11:49 +0000  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* gst-libav.doap:
	* meson.build:
	  Release 1.18.3

2020-12-30 01:15:16 +0900  Seungha Yang <seungha@centricular.com>

	* ext/libav/gstavauddec.c:
	  avauddec: Drain decoder on decoding failure
	  ... and call finish_frame() so that baseclass can reset internal
	  status. Otherwise baseclass will keep holding the status for
	  decoding failed frame which will result in outputting buffer with
	  wrong timestamp.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/113>

2020-12-06 23:57:06 +0000  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development

=== release 1.18.2 ===

2020-12-06 13:24:36 +0000  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* gst-libav.doap:
	* meson.build:
	  Release 1.18.2

2020-10-27 06:33:29 -0400  Arun Raghavan <arun@asymptotic.io>

	* ext/libav/gstavauddec.c:
	  avauddec: Check planar-ness of frame rather than context
	  The check seems to be to present to verify that the decoded frame
	  matches the format we expect. The actual check for the layout of the
	  frame was being performed against the context instead.
	  The check fails at least for avdec_aptx_hd, where the AVCodecContext has
	  the sample format set to AV_SAMPLE_FMT_NONE.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/108>

2020-10-27 12:34:39 +0000  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development

=== release 1.18.1 ===

2020-10-26 11:15:11 +0000  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* gst-libav.doap:
	* meson.build:
	  Release 1.18.1

2020-10-06 03:47:42 +0900  Seungha Yang <seungha@centricular.com>

	* ext/libav/gstavaudenc.c:
	* ext/libav/gstavaudenc.h:
	* ext/libav/gstavutils.h:
	* ext/libav/gstavvidenc.c:
	* ext/libav/gstavvidenc.h:
	  avaudenc/avvidenc: Reopen encoding session if it's required
	  Since the commit https://git.ffmpeg.org/gitweb/ffmpeg.git/commit/22b25b3ea5c,
	  ffmpeg will not clear draning flag for encoder by avcodec_flush_buffers() API
	  by default. Allowed case is only if encoder has AV_CODEC_CAP_ENCODER_FLUSH
	  capability flag. If it's not supported, we should re-open encoding
	  session, otherwise ffmpeg encoder will keep returning AVERROR_EOF
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/102>

2020-10-01 11:18:58 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavvidenc.c:
	  avvidenc: Call avcodec_flush_buffers() after draining to allow accepting new input again
	  This is already done in all other codec elements.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/101>

2020-09-30 16:13:28 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavauddec.c:
	* ext/libav/gstavaudenc.c:
	* ext/libav/gstavviddec.c:
	* ext/libav/gstavvidenc.c:
	  avauddec/audenc/videnc: Don't return GST_FLOW_EOS when draining
	  Same behaviour as for avviddec now. FFmpeg will return AVERROR_EOF when it's
	  completely drained but we should not return that here or otherwise
	  upstream will receive EOS and not forward us more data.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/101>

2020-09-16 03:13:09 +0900  Seungha Yang <seungha@centricular.com>

	* ext/libav/gstavviddec.c:
	  avviddec: Don't return GST_FLOW_EOS from drain()/finish()
	  AVERROR_EOF means that it's fully drained, but it doesn't
	  mean that that end of stream.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/96>

2020-09-15 02:12:23 +0900  Seungha Yang <seungha@centricular.com>

	* ext/libav/gstavauddec.c:
	  avauddec: Ensure finish_subframe() and finish_frame() are paired
	  audiodecoder baseclass implementation is expecting that
	  finish_subframe() is followed by finish_frame() in order clear
	  its internal state related to subframe.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/96>

2020-09-14 14:30:35 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavauddec.c:
	  avauddec: Forward flow returns from draining instead of assuming OK
	  It might be useful for upstream to know that draining/finishing didn't
	  succeed, and why.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/96>

2020-09-14 14:24:51 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavviddec.c:
	  avviddec: Forward flow returns from draining instead of assuming OK
	  It might be useful for upstream to know that draining/finishing didn't
	  succeed, and why.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/96>

2020-09-09 08:55:28 +0200  Edward Hervey <edward@centricular.com>

	* ext/libav/gstavauddec.c:
	  avauddec: Avoid dropping non-OK flow return
	  When sucessfully finishing out frames (or finishing configuration), we must make
	  sure we don't override any failing GstFlowReturn that might have been detected
	  previously.
	  Failure to do this would result in not propagating not-linked, flushing,
	  etc...
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/96>

2016-09-26 20:06:54 -0400  Olivier Crête <olivier.crete@collabora.com>

	* docs/gst_plugins_cache.json:
	* ext/libav/gstavcodecmap.c:
	  avcodecmap: Enable 24 bit WMA Lossless decoding
	  This now works with not so recent ffmpeg.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/95>

2020-09-08 17:44:35 +0100  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development

=== release 1.18.0 ===

2020-09-08 00:08:12 +0100  Tim-Philipp Müller <tim@centricular.com>

	* .gitlab-ci.yml:
	* ChangeLog:
	* NEWS:
	* RELEASE:
	* gst-libav.doap:
	* meson.build:
	  Release 1.18.0

2020-09-07 12:15:17 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavcodecmap.c:
	* ext/libav/gstavviddec.c:
	  Update for gst_video_transfer_function_*() function renaming
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/89>

=== release 1.17.90 ===

2020-08-20 16:14:50 +0100  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* gst-libav.doap:
	* meson.build:
	  Release 1.17.90

2020-08-03 19:28:29 +0300  Jordan Petridis <jordan@centricular.com>

	* docs/gst_plugins_cache.json:
	* ext/libav/gstavcfg.c:
	  gstavcfg.c: fix max->min typo in limits and implict double conversion
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/86>

2020-07-23 15:37:05 +0300  Jordan Petridis <jordan@centricular.com>

	* docs/gst_plugins_cache.json:
	  Revert "docs: update plugins doc cache"
	  This reverts commit d1b20eb6558b5188fe539a2aba3dc15630e703b0.
	  See https://gitlab.freedesktop.org/gstreamer/gst-ci/-/merge_requests/324
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/85>

2020-07-03 12:45:44 +0300  Jordan Petridis <jordan@centricular.com>

	* docs/gst_plugins_cache.json:
	  docs: update plugins doc cache
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/80>

2020-07-08 17:23:12 +0100  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	* scripts/extract-release-date-from-doap-file.py:
	  meson: set release date from .doap file for releases
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/84>

2020-07-07 00:33:22 +0300  Vivia Nikolaidou <vivia@ahiru.eu>

	* ext/libav/gstavviddec.c:
	  avviddec: Fix typo that duplicated closed caption meta
	  We examined the output buffer, instead of the input buffer, for
	  existence of cc meta.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/83>

2020-07-02 12:28:34 +0300  Vivia Nikolaidou <vivia@ahiru.eu>

	* ext/libav/gstavviddec.c:
	  gstavviddec: Only allow a single closed caption meta
	  Following discussion in
	  https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1396#note_556068
	  While it is technically possible to store multiple closed caption metas
	  in the same buffer, we don't currently do that anywhere and for
	  H264/MPEG2 both parts have to be stored in the same packet, and also the
	  number of CC bytes you can store per frame is rather limited. This
	  restriction might be relaxed later once we figured out how to do it
	  without breaking things.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/82>

2020-07-03 02:04:01 +0100  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development

=== release 1.17.2 ===

2020-07-03 00:33:33 +0100  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* gst-libav.doap:
	* meson.build:
	  Release 1.17.2

2020-06-30 18:33:56 +0200  Matej Knopp <matej.knopp@gmail.com>

	* ext/libav/gstavauddec.c:
	  avauddec: fix buffer leak when send packet failed
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/81>

2020-06-26 13:11:56 +0300  Sebastian Dröge <sebastian@centricular.com>

	* docs/gst_plugins_cache.json:
	* ext/libav/gstavcodecmap.c:
	  avcodecmap: Add support for SpeedHQ video codec
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/79>

2020-06-23 00:07:26 +0200  Mathieu Duponchelle <mathieu@centricular.com>

	* docs/meson.build:
	  meson: mark plugins cache target as always stale

2020-06-19 22:59:39 -0400  Thibault Saunier <tsaunier@igalia.com>

	* docs/gst_plugins_cache.json:
	  doc: Stop documenting properties from parents

2020-06-18 22:16:30 +0200  Mathieu Duponchelle <mathieu@centricular.com>

	* ext/libav/gstavmux.c:
	  avmux: zero-initialize packets
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/76>

2020-06-20 00:28:26 +0100  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development

=== release 1.17.1 ===

2020-06-19 19:24:14 +0100  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* docs/gst_plugins_cache.json:
	* gst-libav.doap:
	* meson.build:
	  Release 1.17.1

2020-06-09 15:33:51 -0400  Thibault Saunier <tsaunier@igalia.com>

	* docs/gst_plugins_cache.json:
	  docs: Update plugins cache

2020-06-08 09:44:43 -0400  Thibault Saunier <tsaunier@igalia.com>

	* docs/gst_plugins_cache.json:
	  docs: Update plugins cache

2020-06-06 00:43:02 +0200  Mathieu Duponchelle <mathieu@centricular.com>

	* ext/libav/gstavcfg.c:
	* ext/libav/gstavdeinterlace.c:
	* ext/libav/gstavviddec.c:
	* ext/libav/gstavvidenc.c:
	  plugins: uddate gst_type_mark_as_plugin_api() calls

2020-06-03 18:35:32 -0400  Thibault Saunier <tsaunier@igalia.com>

	* docs/meson.build:
	  doc: Require hotdoc >= 0.11.0

2020-05-27 16:02:45 +0300  Sebastian Dröge <sebastian@centricular.com>

	* docs/gst_plugins_cache.json:
	  docs: Update gst_plugins_cache.json

2020-05-31 10:02:12 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavcfg.c:
	* ext/libav/gstavdeinterlace.c:
	* ext/libav/gstavviddec.c:
	* ext/libav/gstavvidenc.c:
	  plugins: Use gst_type_mark_as_plugin_api() for all non-element plugin types

2020-05-31 09:59:29 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavaudenc.c:
	* ext/libav/gstavcodecmap.c:
	* ext/libav/gstavcodecmap.h:
	  avcodecmap: Remove unused GstFFMpegCompliance type

2020-05-27 16:30:41 +0200  Mathieu Duponchelle <mathieu@centricular.com>

	* ext/libav/gstavdemux.c:
	  avdemux: update the context we use to determine stream's caps
	  The discovered frame rate is only available on the AVStream
	  itself. Updating the temporary context framerate before
	  building caps from it seems like a pretty non-intrusive approach.
	  Fixes #75
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/74>

2020-05-27 16:29:27 +0200  Mathieu Duponchelle <mathieu@centricular.com>

	* ext/libav/gstavcodecmap.c:
	  avcodecmap: use framerate instead of time_base when decoding
	  Documentation for AVCodecContext::time_base:
	  > decoding: the use of this field for decoding is deprecated.
	  > Use framerate instead.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/74>

2020-05-09 15:20:00 +0200  Matej Knopp <matej.knopp@gmail.com>

	* ext/libav/gstavaudenc.h:
	* ext/libav/gstavcodecmap.h:
	* ext/libav/gstavviddec.h:
	  gstlibav: minor fixes for header files
	  Move G_BEGIN_DECLS below includes and add missing include
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/71>

2020-05-08 19:16:41 +0200  Matej Knopp <matej.knopp@gmail.com>

	* ext/libav/gstavviddec.c:
	  gstavviddec: only set range when actually reported by avcodec
	  otherwise we get incomplete colorimetry that video-info complains about
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/70>

2020-04-30 18:12:19 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* README:
	* README.md:
	  README: Convert to markdown, clarify licensing
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/68>

2020-04-30 17:13:00 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* COPYING:
	* COPYING.LIB:
	  All code in this repository is now LGPL-2.1+
	  Starting with 1.17, we will not ship a copy of FFmpeg in our release
	  tarballs, and all the remaining code is LGPL2.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-libav/-/merge_requests/68>

2020-04-15 15:00:02 +0800  Haihao Xiang <haihao.xiang@intel.com>

	* ext/libav/gstavmux.c:
	  avmux: avoid to use unintialized variable
	  Without this fix, running the command below will get an error randomly.
	  Example:
	  gst-launch-1.0 videotestsrc ! vp9enc ! avmux_ivf ! fakesink
	  ERROR: pipeline doesn't want to preroll.
	  0:00:02.388528491 30148 0x5601b424a370 ERROR                  libav :0::
	  Tag [1]V[0][0] incompatible with output codec id '167' (VP90)

2020-03-11 18:26:39 +0900  Seungha Yang <seungha@centricular.com>

	* ext/libav/gstavviddec.c:
	  avviddec: Update for video-hdr struct change
	  See the change of -base https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/594

2020-01-27 14:21:48 -0800  Julien Isorce <jisorce@oblong.com>

	* ext/libav/gstavvidenc.c:
	  avvidenc: handle GST_VIDEO_MULTIVIEW_MODE_MONO
	  Otherwise videotestsrc ! avenc_libx265 ! fakesink
	  outputs `Unsupported multiview mode - no mapping in libav`

2020-01-24 16:14:28 +0200  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavcodecmap.c:
	  avcodecmap: Add some more comments about the assumptions in the ffmpeg code about H264/H265/AAC

2020-01-24 13:04:46 +0200  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavcodecmap.c:
	  avdemux: Only set stream-format for H264/H265/AAC when we have a context
	  Otherwise we don't know yet whether we'll have extradata/codec_data, so
	  can't decide on the stream-format yet.

2020-01-15 14:36:19 +0800  Haihao Xiang <haihao.xiang@intel.com>

	* ext/libav/gstavcodecmap.c:
	  avivf_mux: support VP9 and AV1
	  Besides vp8, ff_ivf_muxer supports VP9 and AV1

2020-01-23 10:03:40 +0200  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavcodecmap.c:
	  avcodecmap: Set AAC/H264/H265 stream-format for demuxer/encoder situations if no codec_data is provided
	  This fixes output of the above formats from demuxers.

2020-01-23 09:45:59 +0200  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavdemux.c:
	  avdemux: Pass the URI from the URI query to avformat_open_input()
	  Some demuxers make use of it in various ways, for example the HLS
	  demuxer.

2019-12-19 17:58:56 +0100  Alicia Boya García <ntrrgc@gmail.com>

	* ext/libav/gstavviddec.c:
	  gstavviddec: Limit default number of decoder threads
	  When the `max-threads` property is not specified, GStreamer defaults to
	  the amount of CPU threads in the system.
	  The number of threads used in avdec has a direct impact on the latency
	  of the decoder, which is of as many frames as threads. Therefore, big
	  numbers of threads can make latency levels that can be problematic in
	  some applications.
	  For this reason, ffmpeg emits a warning when more than 16 threads are
	  requested.
	  This patch limits the default number of threads to 16. This affects only
	  computers with more than 16 CPU threads when using avviddec without
	  setting `max-threads`.

2019-12-02 19:06:04 +0000  Tim-Philipp Müller <tim@centricular.com>

	* pkgconfig/gstreamer-plugins-libav-uninstalled.pc.in:
	  pkgconfig: remove unused file
	  Was never hooked up to meson build it seems, and only ever used
	  by the uninstalled autotools dev env to locate gst-libav plugins
	  for use in unit tests in other modules.

2019-11-29 09:25:24 +0100  Edward Hervey <edward@centricular.com>

	* ext/libav/gstavvidenc.c:
	  avvidenc: Fix error propagation
	  Instead of returning the default return value (GST_FLOW_OK), actually
	  return an error one (res vs ret).

2019-11-04 15:39:59 +0100  Kevin JOLY <kevin.joly@heig-vd.ch>

	* ext/libav/gstavdemux.c:
	  avdemux: Fix segmentation fault if long_name is NULL
	  Some plugins (like libcdio) registers empty long_name field. Calling strncmp on this field leads to a segmentation fault.
	  Signed-off-by: Kevin Joly <joly.kevin25@gmail.com>

2019-10-29 11:43:05 +0900  Seungha Yang <seungha.yang@navercorp.com>

	* ext/libav/gstavviddec.c:
	  avviddec: Fix huge leak caused by circular reference
	  AVBufferRef -> GstFFMpegVideoDecVideoFrame -> GstVideoCodecFrame -> AVBufferRef
	  Instead of holding additional ref there, set read-only which would not be
	  reused by ff_reget_buffer()
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gst-libav/issues/63

2019-10-25 01:09:08 +0900  Seungha Yang <seungha.yang@navercorp.com>

	* ext/libav/gstavviddec.c:
	* ext/libav/gstavvidenc.c:
	  avvideenc,avvidedec: Filtering hardware en/decoder by flag
	  ... instead of filtering them by hardcoded string compare.

2019-10-24 00:25:28 +0900  Seungha Yang <seungha.yang@navercorp.com>

	* ext/libav/gstavviddec.c:
	  avviddec: Enforce allocate new AVFrame per input frame
	  ... if ffmpeg would reuse the allocated AVBuffer. Reused AVFrame by
	  the ffmpeg seems to break our decoding flow since the reused AVFrame
	  holds the initial opaque data (GstVideoCodecFrame in this case), so
	  we couldn't trace the our in/out frames.
	  To enforce get_buffer() call per output frame, hold another reference
	  to the AVBuffer in order to mark the AVBuffer as not writable.
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gst-libav/issues/62

2019-10-13 14:33:27 +0100  Tim-Philipp Müller <tim@centricular.com>

	* .gitignore:
	* .gitmodules:
	* HACKING:
	* Makefile.am:
	* README:
	* TODO:
	* autogen.sh:
	* common:
	* configure.ac:
	* docs/.gitignore:
	* ext/Makefile.am:
	* ext/libav/Makefile.am:
	* gst-libs/Makefile.am:
	* gst-libs/ext/Makefile.am:
	* gst-libs/ext/gas-preprocessor:
	* gst-libs/ext/libav:
	* m4/as-slurp-ffmpeg.m4:
	* pkgconfig/.gitignore:
	* pkgconfig/Makefile.am:
	* tests/Makefile.am:
	* tests/check/.gitignore:
	* tests/check/Makefile.am:
	* tests/check/generic/.gitignore:
	* tests/files/Makefile.am:
	  Remove autotools build system

2019-09-24 23:51:33 +0900  Seungha Yang <seungha.yang@navercorp.com>

	* ext/libav/gstavcodecmap.c:
	* ext/libav/gstavviddec.c:
	  avviddec,avcodemap: Use new helper function for map color space information
	  ... between GStreamer and FFmpeg. Note that FFmpeg follows ISO/IEC 23001-8
	  defined color{matrix,transfer,primaries} values.

2019-09-11 15:59:42 +0000  Marc Leeman <marc.leeman@gmail.com>

	* docs/meson.build:
	  docs: do not require gst-plugins-doc-cache-generator
	  Do not require the cache generator. This is in line with the other
	  gstreamer modules

2019-08-13 22:03:31 +0200  Mathieu Duponchelle <mathieu@centricular.com>

	* ext/libav/gstavvidenc.c:
	  avvidenc: timestamp output buffers
	  Same approach as x264enc, with the one hour offset

2019-08-01 16:27:35 -0400  Doug Nazar <nazard@nazar.ca>

	* ext/libav/gstavauddec.c:
	  avauddec: Don't warn if drain is successful

2019-07-18 00:20:16 +0200  Mathieu Duponchelle <mathieu@centricular.com>

	* ext/libav/gstavviddec.c:
	  avviddec: improve latency calculation
	  When thread_type is set to FF_THREAD_FRAME, per the documentation
	  a latency of one frame per thread is introduced:
	  <https://ffmpeg.org/ffmpeg-codecs.html>, search for thread_type.
	  Additionally, we need in that case to calculate the automatic
	  number of threads ourselves, so as to accurately calculate the
	  latency.

2018-10-06 18:51:58 +0900  Seungha Yang <seungha.yang@navercorp.com>

	* ext/libav/gstavviddec.c:
	* ext/libav/gstavviddec.h:
	  avviddec: Add thread-type property
	  The thread-type property allows specifying preferred
	  multithreading methods by user. Note that FF_THREAD_FRAME
	  may introduce additional latency especially on non-filesrc usecase,
	  since it introduces a decoding delay of (number of threads) frames.
	  https://bugzilla.gnome.org/show_bug.cgi?id=797254

2019-07-15 10:42:42 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavvidenc.c:
	  avvidenc: Close reference context before freeing it
	  Otherwise we'll leak some memory.
	  See https://gitlab.freedesktop.org/gstreamer/gst-libav/merge_requests/32

2019-07-12 14:41:18 +0200  Knut Andre Tidemann <knutandre.tidemann@zenitel.com>

	* ext/libav/gstavaudenc.c:
	  avaudenc: fix memory leak of refcontext after finalize.

2019-06-19 15:44:49 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavvidenc.c:
	  avvidenc: Also set the repeat_pict flag correctly and take the TFF flag from caps if available

2019-06-19 15:43:42 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavvidenc.c:
	  avvidenc: Correctly signal interlaced input to ffmpeg when the input caps are interlaced
	  Regression from 1e4529ced2dadbfed4ac10d639a45dbcb0660129

2019-06-02 21:45:19 +0200  Niels De Graef <niels.degraef@barco.com>

	* configure.ac:
	  meson: Bump minimal GLib version to 2.44
	  This means we can use some newer features and get rid of some
	  boilerplate code using the G_DECLARE_* macros.
	  As discussed on IRC, 2.44 is old enough by now to start depending on it.

2019-05-29 11:49:38 +0530  Guillaume Desmottes <guillaume.desmottes@collabora.com>

	* ext/libav/gstavviddec.c:
	  avviddec: remove cdgraphics element
	  It was never usable as we don't have a parser and we now have 'cdgdec'
	  in gst-plugins-rs.

2019-05-25 13:36:40 +0200  Tim-Philipp Müller <tim@centricular.com>

	* configure.ac:
	  configure: pass -Wno-attributes to fix build against broken ffmpeg headers
	  libavutil/mem.h:342:1: error: ‘alloc_size’ attribute ignored on a function returning ‘int’
	  av_alloc_size(2, 3) int av_reallocp_array(void *ptr, size_t nmemb, size_t size);
	  ^~~~~~~~~~~~~
	  Hopefully fixes build on jenkins.

2019-05-24 20:35:41 +0900  Seungha Yang <seungha.yang@navercorp.com>

	* ext/libav/gstavcodecmap.c:
	* ext/libav/gstavviddec.c:
	  avcodecmap,avviddec: Map bt2020-10, PQ and HLG transfer functions
	  Map more transfer functions between Gstreamer and ffmpeg

2019-05-24 11:47:58 +0200  Arun Raghavan <arun@arunraghavan.net>

	* docs/gst_plugins_cache.json:
	* ext/libav/gstavcodecmap.c:
	  codecmap: Add caps for aptX and aptX-HD

2019-05-16 09:20:56 -0400  Thibault Saunier <tsaunier@igalia.com>

	* docs/gst_plugins_cache.json:
	* docs/meson.build:
	  docs: Stop building the doc cache by default
	  Fixes https://gitlab.freedesktop.org/gstreamer/gst-docs/issues/36

2019-05-13 22:58:09 -0400  Thibault Saunier <tsaunier@igalia.com>

	* docs/gst_plugins_cache.json:
	  docs: Update plugins documentation cache

2018-10-22 11:41:07 +0200  Thibault Saunier <tsaunier@igalia.com>

	* Makefile.am:
	* configure.ac:
	* docs/Makefile.am:
	* docs/gst_plugins_cache.json:
	* docs/index.md:
	* docs/meson.build:
	* docs/plugins/.gitignore:
	* docs/plugins/Makefile.am:
	* docs/plugins/gst-libav-plugins-docs.sgml:
	* docs/plugins/gst-libav-plugins.args:
	* docs/plugins/gst-libav-plugins.hierarchy:
	* docs/plugins/gst-libav-plugins.interfaces:
	* docs/plugins/gst-libav-plugins.prerequisites:
	* docs/plugins/gst-libav-plugins.signals:
	* docs/plugins/gst-libav-plugins.types:
	* docs/plugins/inspect/plugin-libav.xml:
	* docs/plugins/scanobj-build.stamp:
	* docs/sitemap.txt:
	* docs/version.entities.in:
	* ext/libav/meson.build:
	* meson.build:
	* meson_options.txt:
	  docs: Port to hotdoc

2019-05-05 09:38:01 +0200  Christoph Reiter <reiter.christoph@gmail.com>

	* configure.ac:
	  autotools: add bcrypt to win32 libs
	  The included libav requires it now. Otherwise the builds fails with:
	  CCLD     libgstlibav.la
	  build-i686-w64-mingw32/gst-libs/ext/.libs/libavutil.a(random_seed.o): In function `av_get_random_seed':
	  gst-libav-1.16.0/gst-libs/ext/libav/libavutil/random_seed.c:126: undefined reference to `BCryptOpenAlgorithmProvider@16'
	  gst-libav-1.16.0/gst-libs/ext/libav/libavutil/random_seed.c:129: undefined reference to `BCryptGenRandom@16'
	  gst-libav-1.16.0/gst-libs/ext/libav/libavutil/random_seed.c:130: undefined reference to `BCryptCloseAlgorithmProvider@8'
	  collect2.exe: error: ld returned 1 exit status

2019-02-18 20:53:58 +0900  Seungha Yang <seungha.yang@navercorp.com>

	* ext/libav/gstavviddec.c:
	  avviddec: Extract HDR information if any
	  Convert mastering display information (a.k.a HDR static metadata) and
	  content light level information provided by FFMPEG to Gstreamer.

2019-04-29 11:52:31 +0900  Yeongjin Jeong <yeongjin.jeong@navercorp.com>

	* ext/libav/gstav.c:
	  gstav: Use libavcodec util function for version check
	  The version of libavutil is printed in the log instead of libavcodec
	  because avutil_version() returns LIBAVUTIL_VERSION_INT. This can be confusing,
	  so we should be replace it with avcodec_version().

2019-04-29 15:22:52 +0900  Yeongjin Jeong <yeongjin.jeong@navercorp.com>

	* ext/libav/gstavauddec.c:
	  avauddec: Ensure drain even if codec has not delay capabilities
	  There are decoders that need to be drained if they work on multi-threads,
	  even if AV_CODEC_CAP_DELAY is not set.

2019-04-29 15:02:06 +0900  Yeongjin Jeong <yeongjin.jeong@navercorp.com>

	* ext/libav/gstavviddec.c:
	  avviddec: Ensure drain even if codec has not delay capabilities
	  There are decoders that need to be drained if they work on multi-threads,
	  even if AV_CODEC_CAP_DELAY is not set.

2019-04-19 10:38:06 +0100  Tim-Philipp Müller <tim@centricular.com>

	* RELEASE:
	* configure.ac:
	* docs/plugins/inspect/plugin-libav.xml:
	* meson.build:
	  Back to development

=== release 1.16.0 ===

2019-04-19 00:33:22 +0100  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* configure.ac:
	* gst-libav.doap:
	* meson.build:
	  Release 1.16.0

2019-04-19 00:33:22 +0100  Tim-Philipp Müller <tim@centricular.com>

	* docs/plugins/inspect/plugin-libav.xml:
	  Update docs

2019-04-12 10:05:53 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst-libs/ext/libav:
	  libav: Update to ffmpeg n4.1.3

=== release 1.15.90 ===

2019-04-11 00:34:12 +0100  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* configure.ac:
	* gst-libav.doap:
	* meson.build:
	  Release 1.15.90

2019-04-11 00:34:12 +0100  Tim-Philipp Müller <tim@centricular.com>

	* docs/plugins/gst-libav-plugins.args:
	* docs/plugins/inspect/plugin-libav.xml:
	  Update docs

2019-04-09 16:56:20 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/libav/gstavcfg.c:
	  avcfg: Override type of bitrate property from int64 to int
	  See https://gitlab.freedesktop.org/gstreamer/gst-libav/issues/41#note_142808
	  The switch to the new ffmpeg property system changed the type of the
	  bitrate property from int to int64, which potentially breaks many
	  existing applications at runtime as properties are usually set via
	  g_object_set().
	  As such, override the type to int until GStreamer 2.0.

2019-03-28 14:24:42 -0400  Aaron Boxer <aaron.boxer@collabora.com>

	* ext/libav/gstavviddec.c:
	  avviddec: do not add 708 caption meta if already exists
	  (this is only used for CEA 708 raw data). another element
	  such as mpegvideoparse may have already added the meta.

2019-03-23 00:24:25 +0100  Mathieu Duponchelle <mathieu@centricular.com>

	* ext/libav/gstavvidenc.c:
	  avvidenc: pass Closed Caption metadata to libav

2019-02-26 00:00:33 +0000  Tim-Philipp Müller <tim@centricular.com>

	* ext/libav/gstavauddec.c:
	* ext/libav/gstavauddec.h:
	  avauddec: fix decoding of APE and Cook audio
	  .. and other formats where ffmpeg gives us multiple
	  subframes per input frame.
	  Since we now support non-interleaved audio, we can't
	  just concat buffers any more. Also, audio metas won't
	  be combined when buffers are merged, so when we push
	  out the combined buffer we'll look at the meta describing
	  only the first subframe and think it covers the whole
	  frame leading to stutter/gaps in the output.
	  We could fix this by copying the output data into a new
	  buffer when we merge buffers, but that's suboptimal, so
	  let's add some API to GstAudioDecoder to push out subframes
	  and use that instead.
	  https://gitlab.freedesktop.org/gstreamer/gst-libav/issues/49

2019-03-04 09:12:35 +0000  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* configure.ac:
	* docs/plugins/inspect/plugin-libav.xml:
	* meson.build:
	  Back to development

=== release 1.15.2 ===

2019-02-26 11:57:15 +0000  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* configure.ac:
	* gst-libav.doap:
	* meson.build:
	  Release 1.15.2

2019-02-26 11:57:15 +0000  Tim-Philipp Müller <tim@centricular.com>

	* docs/plugins/inspect/plugin-libav.xml:
	  Update docs

2019-02-21 08:48:31 +0100  Guillaume Desmottes <guillaume.desmottes@collabora.com>

	* ext/libav/gstavdemux.c:
	  avdemux: fix negative pts if start_time is bigger than the ts
	  The start time is supposed to be the ts of the first frame.
	  FFmpeg uses fractions to represent timestamps and the start time may use a
	  different base than the frame pts. So we may end up having the start
	  time bigger than the pts because of rounding when converting to gst ts.
	  See https://gitlab.freedesktop.org/gstreamer/gst-libav/issues/51
	  for details.

2019-02-12 17:23:55 +0200  Sebastian Dröge <sebastian@centricular.com>

	* configure.ac:
	  configure: Only disable dxva2 once

2019-02-12 10:57:24 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst-libs/ext/libav:
	  Update to ffmpeg n4.1.1

=== release 1.15.1 ===

2019-01-17 02:21:41 +0000  Tim-Philipp Müller <tim@centricular.com>

	* ChangeLog:
	* NEWS:
	* RELEASE:
	* configure.ac:
	* gst-libav.doap:
	* meson.build:
	  Release 1.15.1

2019-01-17 02:21:35 +0000  Tim-Philipp Müller <tim@centricular.com>

	* docs/plugins/gst-libav-plugins.args:
	* docs/plugins/gst-libav-plugins.hierarchy:
	* docs/plugins/gst-libav-plugins.interfaces:
	* docs/plugins/inspect/plugin-libav.xml:
	  Update docs

2019-01-13 00:46:50 +0900  Seungha Yang <seungha.yang@navercorp.com>

	* ext/libav/gstavcfg.c:
	  avcfg: Fix AVOptionRanges leak
	  It must be freed with av_opt_freep_ranges as documented.

2018-12-05 17:24:43 -0300  Thibault Saunier <tsaunier@igalia.com>

	* common:
	  Automatic update of common submodule
	  From ed78bee to 59cb678

2018-11-15 11:29:54 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst-libs/ext/libav:
	  libav: Update to ffmpeg n4.1

2018-11-12 13:04:51 +0200  Jordan Petridis <jordan@centricular.com>

	* .gitlab-ci.yml:
	  Add Gitlab CI configuration
	  This commit adds a .gitlab-ci.yml file, which uses a feature
	  to fetch the config from a centralized repository. The intent is
	  to have all the gstreamer modules use the same configuration.
	  The configuration is currently hosted at the gst-ci repository
	  under the gitlab/ci_template.yml path.
	  Part of https://gitlab.freedesktop.org/gstreamer/gstreamer-project/issues/29

2018-11-08 16:33:57 +0100  Edward Hervey <edward@centricular.com>

	* ext/libav/gstavcodecmap.c:
	  codecmap: Add mapping for Voxware metasound
	  Allows actually decoding such streams :)

2018-11-05 10:22:19 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst-libs/ext/libav:
	  libav: Update to ffmpeg n4.0.3

2018-11-05 05:40:03 +0000  Matthew Waters <matthew@centricular.com>

	* .gitmodules:
	  Update common submodule location
	  Remove the git directory

2018-11-05 13:17:08 +0800  Haihao Xiang <haihao.xiang@intel.com>

	* .gitmodules:
	* gst-libav.doap:
	  Clone the code from gitlab
	  This fixes https://gitlab.freedesktop.org/gstreamer/gst-libav/issues/43

2018-10-29 14:31:52 +0000  Nirbheek Chauhan <nirbheek@centricular.com>

	* meson.build:
	  meson: Remove leftover debug logging

2018-10-16 04:08:57 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* ext/libav/gstavcfg.c:
	  avcfg: Ensure that ternary operator always evaluates to int64
	  When building with MSVC, if the 3rd operator is a double, the entire
	  expression always promoted double, and is then cast to int64.
	  When TRUE, this evaluates to (gint64) (gdouble) (INT64_MAX)
	  which overflows to INT64_MIN on MSVC, but not on C99 compilers.
	  This causes us to fail the g_return_if_fail inside g_param_spec_int64
	  when built with MSVC.

2018-10-12 19:20:51 +0530  Arun Raghavan <arun@arunraghavan.net>

	* ext/libav/gstavdemux.c:
	  avdemux: Expose IFF container support
	  This exposes support for the "iff" demuxer. This is a general purpose
	  format, and the reason to expose this now is to allow reading DSD data
	  (which is supported via a variant called DSDIFF).
	  More information at:
	  https://wiki.multimedia.cx/index.php?title=IFF
	  https://www.loc.gov/preservation/digital/formats/fdd/fdd000245.shtml

2018-10-09 18:07:09 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* ext/libav/meson.build:
	* meson.build:
	  meson: Generate a pkgconfig file for gstlibav
	  This matches all other plugins in the other gstreamer repos. This is
	  also necessary for generating the correct libtool archive (.la) files
	  in Cerbero which are needed for static linking on Android and iOS.

2018-10-08 20:55:08 +0100  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  meson: use new 'python' module instead of deprecated 'python3' one
	  https://github.com/mesonbuild/meson/pull/4169

2018-10-01 16:13:29 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* meson.build:
	  meson: Don't export symbols from linked static libraries
	  We don't want to export any symbols from the ffmpeg static libraries
	  we link to when building inside Cerbero. In the Autotools build, we
	  pass -export-symbols-regex to libtool which ensures this for us.

2018-09-21 16:01:53 +0200  Edward Hervey <edward@centricular.com>

	* ext/libav/gstavviddec.c:
	  avviddec: Remove unneeded check
	  frame is always valid in this function (but wasn't before the
	  refactoring from a few months ago).
	  CID #1439540

2018-09-21 11:30:58 +0200  Edward Hervey <edward@centricular.com>

	* ext/libav/gstavcfg.c:
	  avcfg: Simplify code
	  The existence of 'opt' is checked, the remainder of the code can therefore
	  rely on it being valid.
