=== release 1.24.2 ===

2024-04-09 21:48:55 +0100  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-good.doap:
	* meson.build:
	  Release 1.24.2

2024-04-08 13:04:31 +0100  Philippe Normand <philn@igalia.com>

	* ext/vpx/gstvpxenc.c:
	  vpxenc: Include vpx error details in errors and warnings
	  The vpx_codec_t err_detail string usually provides additional context about the
	  error, so include it in GStreamer warnings and errors, when it's not NULL.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6584>

2024-04-08 19:53:06 +0200  Jochen Henneberg <jochen@centricular.com>

	  qt6: Fixes for dummy texture
	  * RED_OR_ALPHA8 will map value to alpha for OpenGL, use R8 to avoid
	  2nd shader
	  * Determine texel size for proper texture memory preparation
	  * QByteArray::fromRawData() does shallow copy and thus leads to use of
	  corrupted memory
	  * Make sure RGBA dummy texture is fully opaque
	  * QRhiTexture::create() must be called to allocate texture resources
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6581>

2024-04-06 02:28:44 +0200  Jochen Henneberg <jochen@centricular.com>

	* ext/qt/gstqsgmaterial.cc:
	* ext/qt/gstqsgmaterial.h:
	  qt: Fixup for dummy textures
	  * Initialize dummy texture Ids
	  * Ensure YUV->RGB matrix set for dummy textures
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6581>

2024-04-04 13:21:44 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtpmanager/gstrtpbin.c:
	  rtpbin: Don't re-use a variable for a completely different purpose temporarily
	  During RTP-Info synchronization, clock_base was temporarily switched
	  from the actual clock-base to the base RTP time and then back some lines
	  later.
	  Instead directly work with the base RTP time. The comment about using a
	  signed variable for convenience doesn't make any sense because all
	  calculations done with the value are unsigned.
	  Similarly, rtp_clock_base was overridden with the rtp_delta when
	  calculating it, which was fine because it is not used anymore
	  afterwards. Instead, introduce a new variable `rtp_delta` to make this
	  calculation clearer.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6575>

2024-04-04 13:19:18 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtpmanager/gstrtpbin.c:
	  rtpbin: Convert clock-base to extended RTP timestamp correctly
	  It's not in the same period as the current RTP base time but always in
	  the very first period. This avoids using it again at a much later time.
	  The code in question is only triggered with rtcp-sync=rtp-info.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6575>

2024-04-04 13:11:54 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtpmanager/gstrtpjitterbuffer.c:
	  rtpjitterbuffer: Use an extended RTP timestamp for the clock-base
	  It is compared to other extended RTP timestamps all over rtpjitterbuffer
	  and since 4df3da3bab8 the initial extended RTP timestamp is not equal
	  anymore to the plain RTP time.
	  Continue passing a non-extended RTP timestamp via the `sync` signal for
	  backwards compatibility. It will always be a timestamp inside the first
	  extended timestamp period anyway.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6575>

2024-03-26 13:33:56 +0200  Sebastian Dröge <sebastian@centricular.com>

	* docs/gst_plugins_cache.json:
	* gst/rtpmanager/gstrtphdrext-ntp.c:
	  rtphdrext-ntp: Fix typo of the RFC number in the element metadata
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3417
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6537>

2024-03-28 09:46:08 +0100  Robert Guziolowski <robert.guziolowski@gmail.com>

	* ext/qt6/gstqsg6material.cc:
	  qml6glsink: fix destruction of underlying texture
	  One should not directly delete the QRhiTexture instance.
	  Instead it should be marked as to be deleted once QRhi::endFrame()
	  is called (see: https://doc.qt.io/qt-6/qrhiresource.html#deleteLater )
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3443
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6506>

2024-04-02 21:30:50 +1100  Jan Schmidt <jan@centricular.com>

	* gst/rtpmanager/rtpjitterbuffer.c:
	  rtpjitterbuffer: Don't use estimated_dts to do default skew adjustment
	  When the buffer DTS is estimated based on arrival time at the
	  jitterbuffer (rather than provided on the incoming buffer itself),
	  it shouldn't be used for skew adjustment. The typical case is
	  packets being deinterleaved from a tunnelled TCP/HTTP RTSP stream,
	  and the arrival times at the jitter buffer are not well enough
	  correlated to usefully do skew adjustments.
	  This restores the original intended behaviour for the 'estimated dts'
	  path, that was broken years ago during other jitterbuffer refactoring.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6561>

2024-04-06 12:26:39 +0300  Sebastian Dröge <sebastian@centricular.com>

	* ext/flac/meson.build:
	  flac: Add wrap file and add fallback for it to the flac plugin
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6560>

2024-02-28 11:28:23 +0800  Tim Blechmann <tim@klingt.org>

	* sys/v4l2/gstv4l2object.c:
	  v4l2: enforce a pixel aspect ratio of 1/1 if no data are available
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6559>

2024-04-05 14:21:38 +0200  Philipp Zabel <p.zabel@pengutronix.de>

	* sys/v4l2/gstv4l2allocator.c:
	  v4l2: allocator: Fix unref log/trace on memory release
	  Use gst_object_unref() instead of g_object_unref() in
	  gst_v4l2_allocator_release(), so refcounting log and
	  tracer get to know about this unref.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6556>

2024-03-29 11:14:54 +0900  Elliot Chen <elliot.chen@nxp.com>

	* sys/v4l2/gstv4l2object.c:
	  v4l2: fix error in calculating padding bottom for tile format
	  This is a regression while porting to arbitrary tile dimensions
	  introduced in !3424.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6554>

2024-04-01 14:41:21 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/audioparsers/gstwavpackparse.c:
	  wavpackparse: Use an unsigned integer for the block size calculations
	  It's never negative.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6541>

2024-04-01 14:36:19 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/audioparsers/gstwavpackparse.c:
	  wavpackparse: Fix potential integer overflow on ID_ODD_SIZE blocks
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6541>

2024-04-01 14:33:05 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/audioparsers/gstwavpackparse.c:
	* gst/audioparsers/gstwavpackparse.h:
	  wavpackparse: Explicitly handle ID_WVX_NEW_BITSTREAM
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6541>

2024-03-28 19:49:46 +0000  Tim-Philipp Müller <tim@centricular.com>

	* tests/check/elements/rtpred.c:
	  tests: rtpred: fix out-of-bound writes
	  Don't write more data to the buffer than we allocated
	  space for.
	  Fixes #3312
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6478>

2024-03-27 15:21:56 +0900  Haihua Hu <jared.hu@nxp.com>

	* sys/v4l2/gstv4l2src.c:
	  v4l2src: need maintain the caps order in caps compare when fixate
	  if the calculated "distance" of caps A and B from the preference are
	  equal, need to keep the original order instead of swap them
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6473>

2024-03-26 23:53:30 +1100  Jan Schmidt <jan@centricular.com>

	* gst/rtp/gstrtpmp4adepay.c:
	  rtpmp4adepay: Set duration on outgoing buffers
	  If we can calculate timestamps for buffers, then set the duration
	  on outgoing buffers based on the number of samples depayloaded.
	  This can fix the muxing to mp4, where otherwise the last packet
	  in a muxed file will have 0 duration in the mp4 file.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6456>

2024-03-21 18:07:42 +0900  Hou Qi <qi.hou@nxp.com>

	* sys/v4l2/gstv4l2object.c:
	  v4l2: Also set max_width/max_height if enum framesize fail
	  Some driver doesn't implement enum_framesize. The maximum supported
	  size can be got by trying format with a very large size. Also need
	  to set max_width/max_height for this case, otherwise default encoded
	  buffer size 256kB is too small.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6430>

2024-03-22 01:38:06 +0100  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development

=== release 1.24.1 ===

2024-03-21 21:47:53 +0100  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-good.doap:
	* meson.build:
	  Release 1.24.1

2024-03-18 15:07:28 +0100  Edward Hervey <edward@centricular.com>

	* ext/adaptivedemux2/hls/gsthlsdemux-playlist-loader.c:
	* ext/adaptivedemux2/hls/gsthlsdemux-preloader.c:
	* ext/adaptivedemux2/hls/gsthlsdemux-stream.c:
	* ext/adaptivedemux2/hls/gsthlsdemux-util.c:
	* ext/adaptivedemux2/hls/gsthlsdemux.c:
	* ext/adaptivedemux2/hls/m3u8.c:
	  adaptivedemux2: Don't use g_str_equal on potentially NULL strings
	  It is only meant to be used as a callback. The fallback macro uses strcmp which
	  doesn't handle NULL strings gracefully. Instead use g_strcmp0
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6410>

2024-03-18 15:02:29 +0100  Edward Hervey <edward@centricular.com>

	* ext/adaptivedemux2/hls/gsthlsdemux.c:
	  hlsdemux2: Avoid NULL pointer usage
	  The pending/current variant are both NULL when the demuxer is resetted.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6410>

2024-03-18 15:00:02 +0100  Edward Hervey <edward@centricular.com>

	* ext/adaptivedemux2/gstadaptivedemuxutils.c:
	  adaptivedemux2: Handle context going away
	  This issue can happen when the scheduler loop was stopped (and context went
	  away). We no longer want to push/pop main context threads.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6410>

2024-03-18 14:57:43 +0100  Edward Hervey <edward@centricular.com>

	* ext/adaptivedemux2/hls/gsthlsdemux-playlist-loader.c:
	  hlsdemux2: Improve detection of playlist updates
	  In the case we are not updating an existing playlist, we only want to reset the
	  download error count if the URI we are downloading was not the previous one we
	  were trying to load
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6410>

2024-03-13 13:39:21 +0100  Alexander Slobodeniuk <aslobodeniuk@fluendo.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: remove 'deprecated' flag from the 'push-backchannel-sample' signal
	  It seems that it was added by accident when copying from push-backchannel-buffer
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6363>

2024-03-11 10:39:27 +0200  Sebastian Dröge <sebastian@centricular.com>

	* ext/mpg123/gstmpg123audiodec.c:
	  mpg123audiodec: Correctly handle the case of clipping all decoded samples
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3365
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6357>

2024-03-11 18:13:37 +0100  Piotr Brzeziński <piotr@centricular.com>

	* gst/isomp4/qtdemux.c:
	  qtdemux: Fix wrapping temporary memory in buffers
	  That memory can disappear at any moment, doesn't cost much to just copy those few bytes.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6339>

2024-01-31 00:32:22 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: Don't invoke close when stopping if we've started cleanup
	  When we're doing a state change from PLAYING to NULL, first we invoke
	  gst_rtspsrc_loop_send_cmd_and_wait (..., CMD_CLOSE, ...) during
	  PAUSED_TO_READY which will schedule a TEARDOWN to happen async on the
	  task thread.
	  The task thread will call gst_rtspsrc_close(), which will send the
	  TEARDOWN and once it's complete, it will call gst_rtspsrc_cleanup()
	  without taking any locks, which frees src->streams.
	  At the same time however, the state change in the app thread will
	  progress further and in READY_TO_NULL it will call gst_rtspsrc_stop()
	  which calls gst_rtspsrc_close() a second time, which accesses
	  src->streams (without a lock again), which leads to simultaneous
	  access of src->streams, and a segfault.
	  So the state change and the cleanup are racing, but they almost always
	  complete sequentially. Either the cleanup sets src->streams to NULL or
	  _stop() completes first. Very rarely, _stop() can start while
	  src->streams is being freed in a for loop. That causes the segfault.
	  This is unlocked access is unfixable with more locking, it just leads
	  to deadlocks. This pattern has been observed in rtspsrc a lot: state
	  changes and cleanup in the element are unfixably racy, and that
	  foundational issue is being addressed separately via a rewrite.
	  The bandage fix here is to prevent gst_rtspsrc_stop() from accessing
	  src->streams after it has already been freed by setting src->state to
	  INVALID.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6330>

2024-03-07 16:17:41 +0100  Michael Tretter <m.tretter@pengutronix.de>

	* meson_options.txt:
	  meson: Fix description in qt options
	  The qt-x11 description contains a copy/paste error from the qt-wayland option.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6313>

2024-02-16 18:11:07 +0100  Mathieu Duponchelle <mathieu@centricular.com>

	* gst/rtp/gstrtpgstpay.c:
	  rtpgstpay: flush on EOS
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6298>

2023-08-11 13:06:24 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtp/gstrtpgstpay.c:
	* gst/rtp/gstrtpgstpay.h:
	  rtpgstpay: Delay pushing of event packets until the next buffer
	  And also re-timestamp them with the current buffer's PTS.
	  Not doing so keeps the timestamps of event packets as
	  GST_CLOCK_TIME_NONE or the timestamp of the previous buffer, both of
	  which are bogus.
	  Making sure that (especially) the first packet has a valid timestamp
	  allows putting e.g. the NTP timestamp RTP header extension on it.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6298>

2024-02-26 19:17:27 -0600  Elizabeth Figura <zfigura@codeweavers.com>

	* gst/isomp4/qtdemux.c:
	  qtdemux: Do not set channel-mask to zero
	  Leave it uninitialized, so that the downstream decoder will initialize it appropriately. Setting it to zero is wrong.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6296>

2024-03-01 02:44:57 +1100  Jan Schmidt <jan@centricular.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: Parse Speed/Scale before Range in responses
	  Parse the speed and scale in the server's response
	  *before* the range, so that the range start/stop
	  are swapped (or not swapped) correctly based
	  on the server's actual chosen values. Otherwise,
	  the old rate from the segment is used - what the
	  last seek asked for, but not necessarily what
	  the server chooses.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6295>

2024-02-29 12:06:25 +1100  Jan Schmidt <jan@centricular.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: Handle queries and events with no manager
	  When doing direct output with no session manager, we still
	  want to respond to queries and events from downstream, so
	  install the handlers
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6295>

2024-02-29 11:14:47 +1100  Jan Schmidt <jan@centricular.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: return NO_PREROLL on PLAYING->PAUSED too
	  When transitioning back to PAUSED and rtspsrc is live, return
	  NO_PREROLL so the pipeline knows to skip preroll here too.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6295>

2024-02-24 11:07:26 +0000  Tim-Philipp Müller <tim@centricular.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: Consider 503 Service Not Available when handling broken control urls
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6267>

2024-03-05 13:45:27 +0000  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6264>

=== release 1.24.0 ===

2024-03-04 23:51:42 +0000  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* README.md:
	* RELEASE:
	* gst-plugins-good.doap:
	* meson.build:
	  Release 1.24.0

2024-02-27 14:22:58 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* docs/gst_plugins_cache.json:
	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: Increase rank to PRIMARY for autoplug purposes
	  This affects autoplug by gst_element_make_from_uri() in, for example,
	  uridecodebin. The element should've already been PRIMARY rank, but it
	  was NONE because gst_element_make_from_uri() doesn't ignore NONE rank
	  elements when searching for element factories, unlike decodebin.
	  Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/502
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6226>

2024-02-26 09:27:40 +0100  Edward Hervey <edward@centricular.com>

	* README.md:
	* RELEASE:
	  docs: Use Discourse and Matrix as prefered communication channels
	  Part of: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6220

2024-02-22 20:35:28 +0900  Seungha Yang <seungha@centricular.com>

	* ext/jpeg/gstjpegdec.c:
	  jpegdec: Fix progressive/interlaced detection
	  If input height and parsed one are identical, do not consider it as interlaced
	  Fixing below pipeline:
	  gst-launch-1.0 videotestsrc ! video/x-raw,format=I420,width=640,height=10 \
	  ! jpegenc ! jpegparse ! jpegdec ! videoconvert ! autovideosink
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6181>

2024-02-26 23:14:54 +0900  Seungha Yang <seungha@centricular.com>

	* ext/jpeg/gstjpegdec.c:
	  jpegdec: Remove trailing white space
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6181>

=== release 1.23.90 ===

2024-02-23 18:20:11 +0000  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-good.doap:
	* meson.build:
	  Release 1.23.90

2024-02-23 11:45:50 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* ext/soup/meson.build:
	* meson_options.txt:
	  soup: Re-add soup-lookup-dep option
	  It's still useful on Linux since it ensures that the tests are going
	  to be built, since they use the same dep lookup as the plugin now.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6197>

2024-02-21 19:13:45 +1100  Matthew Waters <matthew@centricular.com>

	* tests/examples/qt/qmlsink-multisink/main.cpp:
	  examples/qmlsinnk-multisink: allow running with leaks tracer
	  Include a gst_deinit() after the qml engine has been destroyed.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6160>

2024-02-21 19:11:59 +1100  Matthew Waters <matthew@centricular.com>

	* tests/examples/qt/qmlsink-multisink/videoitem/videoitem.cpp:
	  examples/qml: fix some leaks in the multisink example
	  A GstPad was being leaked and possibly the qmlglsink element depending
	  on if Qt runs the scenegraph thread again when destroying the example
	  video item.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6160>

2024-02-21 19:09:20 +1100  Matthew Waters <matthew@centricular.com>

	* ext/qt/qtitem.cc:
	* ext/qt6/qt6glitem.cc:
	  qml, qml6: Fix leak of QSGMaterial/Geometry (and therefore a possible GstBuffer)
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6160>

2024-02-07 15:04:53 +1100  Matthew Waters <matthew@centricular.com>

	* ext/qt6/gstqsg6material.cc:
	  qml6: fix a leak of the wrapped QSGTextures
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6160>

2024-02-21 19:21:57 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtpmanager/gstrtphdrext-clientaudiolevel.c:
	  rtphdrext-clientaudiolevel: Fix typo in documentation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6175>

2024-02-21 13:45:47 +0100  Arnaud Vrac <avrac@freebox.fr>

	* ext/adaptivedemux2/meson.build:
	  adaptivedemux2: fix build with recent meson
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6168>

2024-02-20 11:55:25 +0000  Tim-Philipp Müller <tim@centricular.com>

	* docs/gst_plugins_cache.json:
	* gst/rtp/gstrtppassthroughpay.c:
	  rtppassthroughpay: fix critical in gst-inspect
	  gst_segment_to_running_time() will fail noisily
	  if the segment has not been initialised yet.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6151>

2024-02-21 02:30:11 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* ext/adaptivedemux2/gstadaptivedemuxelement.c:
	* ext/adaptivedemux2/meson.build:
	* ext/soup/gstsoupelement.c:
	* ext/soup/gstsouphttpsrc.c:
	* ext/soup/gstsouploader.c:
	* ext/soup/gstsouploader.h:
	* ext/soup/gstsouputils.h:
	* ext/soup/meson.build:
	* meson_options.txt:
	* tests/check/meson.build:
	  soup: Link to libsoup in all cases on non-Linux
	  We have unsolvable issues on macOS because of this, and the feature
	  was added specifically for issues that occur on Linux distros since
	  they ship both libsoup 2.4 and 3.0.
	  Everyone else should just pick one and use it, since you cannot mix
	  the two in a single process anyway.
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1171
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6156>

2024-02-17 23:33:26 +1100  Jan Schmidt <jan@centricular.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: Reset combined flows after a seek before restarting
	  After a flushing seek, rtspsrc doesn't reset the last_ret value for
	  streams, so might immediately shut down again when it resumes pushing
	  buffers to pads due to a cached `GST_FLOW_FLUSHING` result
	  Prevent a stored flushing value from immediately stopping
	  playback again by resetting pad flows before (re)starting
	  playback.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6137>

2023-11-29 17:43:30 +0200  Maksym Khomenko <maksym.khomenko@skelia.partners>

	* sys/osxaudio/gstosxcoreaudiocommon.c:
	  osxaudio: add mapping for top/left/right surround channels
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5731>

2023-11-29 17:40:52 +0200  Maksym Khomenko <maksym.khomenko@skelia.partners>

	* sys/osxaudio/gstosxcoreaudiocommon.c:
	  osxaudio: correct mapping for left/right surround
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5731>

2024-02-12 09:55:24 +0100  Marc Leeman <m.leeman@televic.com>

	* ext/qt6/meson.build:
	  qt6: search in /usr/lib/qt6/bin/ for qsb
	  In Debian and possibly other distributions, qsb (qt6-shader-baker) is
	  not in the default path, but in a QT6 specific path. Search there too
	  Applied changes from Nirbheek
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6095>

2023-09-17 18:48:13 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/isomp4/gstrtpxqtdepay.c:
	  rtpxqtdepay: Enabled header extension aggregation
	  Because this depayloader may build several output buffers within one
	  process run we push them all into a GstBufferList and push them out at
	  once to make sure that each buffer gets notified about each header
	  extension.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-10 19:06:35 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpmp4gdepay.c:
	* gst/rtp/gstrtpmp4gdepay.h:
	  rtpmp4gdepay: Enabled header extension aggregation
	  Because this depayloader may build several output buffers within one
	  process run we push them all into a GstBufferList and push them out at
	  once to make sure that each buffer gets notified about each header
	  extension.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-10 19:06:10 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpsbcdepay.c:
	  rtpsbcdepay: Enabled header extension aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-10 19:05:11 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpvorbisdepay.c:
	  rtpvorbisdepay: Enabled header extension aggregation
	  Because this depayloader may build several output buffers within one
	  process run we push them all into a GstBufferList and push them out at
	  once to make sure that each buffer gets notified about each header
	  extension.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-10 19:04:00 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpmp4vdepay.c:
	  rtpmp4vdepay: Enabled header extension aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:33:52 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtptheoradepay.c:
	  rtptheoradepay: Enabled header extension aggregation
	  Because this depayloader may build several output buffers within one
	  process run we push them all into a GstBufferList and push them out at
	  once to make sure that each buffer gets notified about each header
	  extension.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:33:34 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpsv3vdepay.c:
	  rtpsv3vdepay: Enabled header extension aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:31:57 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpmp4adepay.c:
	  rtpmp4adepay: Enabled header extension aggregation
	  Because this depayloader may build several output buffers within one process
	  run we push them all into a GstBufferList and push them out at once to
	  make sure that each buffer gets notified about each header extension.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:31:41 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpklvdepay.c:
	  rtpklvdepay: Enabled header extension aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:31:20 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpjpegdepay.c:
	  rtpjpegdepay: Enabled header extension aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:30:48 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtpj2kdepay.c:
	  rtpj2kdepay: Enabled header extension aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:30:31 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtph263pdepay.c:
	  rtph263pdepay: Enabled header extension aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:29:32 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtph263depay.c:
	  rtph263depay: Enabled header extensions aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2023-09-04 17:28:46 +0200  Jochen Henneberg <jh@henneberg-systemdesign.com>

	* gst/rtp/gstrtph261depay.c:
	  rtph261depay: Enabled header extension aggregation
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>

2014-06-18 14:27:22 +0200  Priit Laes <plaes@plaes.org>

	* docs/gst_plugins_cache.json:
	* ext/libcaca/gstcacasink.c:
	* ext/libcaca/gstcacasink.h:
	  cacasink: add driver selection support from the pipeline
	  https://bugzilla.gnome.org/show_bug.cgi?id=599018
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5491>

2024-02-15 16:38:53 +0000  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6126>

=== release 1.23.2 ===

2024-02-15 15:37:17 +0000  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-good.doap:
	* meson.build:
	  Release 1.23.2

2024-02-14 15:49:43 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtp/dboolhuff.LICENSE:
	* gst/rtp/dboolhuff.c:
	* gst/rtp/dboolhuff.h:
	* gst/rtp/gstrtpvp8pay.c:
	* gst/rtp/meson.build:
	  Revert "rtpvp8pay: Use GstBitReader instead of dboolhuff implementation from libvpx"
	  This reverts commit b730e7a1b28ce4bcea90fbff7c5293fa2c0a76b2.
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3300
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6116>

2024-02-13 18:57:05 +0100  Mathieu Duponchelle <mathieu@centricular.com>

	* gst/rtpmanager/gstrtpbin.c:
	  webrtcbin, rtpbin: check before setting properties on jitterbuffer
	  In rtpbin we already systematically check for all property names
	  except latency, correct that.
	  In webrtcbin we need to check before trying to use the do-retransmission
	  property.
	  This is useful for the case where an element like identity gets passed
	  to rtpbin's request-jitterbuffer property, when the application wants
	  to use webrtcbin in an SFU situation, with no reordering and no added
	  latency
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6112>

2024-02-13 17:43:15 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtpmanager/gstrtpfunnel.c:
	  rtpfunnel: Handle NTP-64 RTP header extension in caps similar to TWCC
	  This is another header extension that is handled by rtpsession and needs
	  to be preserved in the caps that are created by rtpfunnel.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6109>

2024-02-14 00:37:38 +0000  Tim-Philipp Müller <tim@centricular.com>

	* po/lv.po:
	* po/ro.po:
	* po/tr.po:
	  gst-plugins-good: update translations
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6113>

2024-02-13 18:07:52 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtpmanager/gstrtpfunnel.c:
	  rtpfunnel: Also write TWCC RTP header extension into buffer list buffers
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6110>

2024-02-03 11:54:41 +0000  Philippe Normand <philn@igalia.com>

	* ext/adaptivedemux2/dash/gstdashdemux.c:
	  dashdemux2: Basic support for container-specific-track-id tag
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6041>

2024-02-03 11:53:36 +0000  Philippe Normand <philn@igalia.com>

	* gst/matroska/matroska-demux.c:
	  matroska-demux: Basic support for container-specific-track-id tag
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6041>

2024-02-03 11:52:42 +0000  Philippe Normand <philn@igalia.com>

	* gst/isomp4/qtdemux.c:
	  qtdemux: Basic support for container-specific-track-id tag
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6041>

2024-02-09 11:13:16 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* ext/qt6/meson.build:
	  meson: Don't use fs.copyfile() for qt6 resources
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3285
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6077>

2023-12-01 14:49:37 +0100  Ignazio Pillai <ignazp@amazon.com>

	* docs/gst_plugins_cache.json:
	* gst/cutter/gstcutter.c:
	* gst/cutter/gstcutter.h:
	  cutter: add audio-level-meta
	  Set GstAudioLevelMeta on buffers
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5771>

2024-02-05 23:04:45 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* ext/qt6/meson.build:
	  meson: Fix several warnings in the build
	  Deprecations, incorrect options, etc.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6058>

2024-02-05 22:39:29 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* tests/check/meson.build:
	  good/tests: Don't enable soup tests if soup is disabled
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3268
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6058>

2024-02-06 18:09:02 +0000  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6066>

=== release 1.23.1 ===

2024-02-06 16:37:19 +0000  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-good.doap:
	* meson.build:
	  Release 1.23.1

2024-02-05 09:27:54 +0100  Tim-Philipp Müller <tim@centricular.com>

	* meson_options.txt:
	  meson_options.txt: fix meson warning about default bool values being a string

2024-02-02 23:04:29 +0530  Nirbheek Chauhan <nirbheek@centricular.com>

	* ext/qt/meson.build:
	* ext/qt6/meson.build:
	  meson: Print a useful error message when qt windowing is not found
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6040>

2023-08-24 15:18:05 +0900  Hou Qi <qi.hou@nxp.com>

	* ext/adaptivedemux2/hls/m3u8.c:
	  hlsdemux2/m3u8: use GstClockTimeDiff to do timestamp comparison
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5234>

2023-12-13 20:43:14 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtp/dboolhuff.LICENSE:
	* gst/rtp/dboolhuff.c:
	* gst/rtp/dboolhuff.h:
	* gst/rtp/gstrtpvp8pay.c:
	* gst/rtp/meson.build:
	  rtpvp8pay: Use GstBitReader instead of dboolhuff implementation from libvpx
	  All compressed frame header values that are read as part of the
	  payloader are encoded as bits with 50:50 probability, and as such are
	  just the plain bits as they are.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5810>

2023-08-22 16:11:06 -0400  Daniel Morin <daniel.morin@collabora.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: update rtsp url on redirect
	  - If a redirect took place on a GET when rtsp is tunneled we update the
	  rtsp url too.
	  - log source and final destination on redirect
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5222>

2024-01-29 16:10:21 -0300  Thibault Saunier <tsaunier@igalia.com>

	* gst/matroska/matroska-read-common.c:
	  matroskademux: Lower verbosity of some often happenning warnings
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6011>

2024-01-29 16:10:06 -0300  Thibault Saunier <tsaunier@igalia.com>

	* gst/isomp4/qtdemux.c:
	* gst/isomp4/qtdemux_types.c:
	  qtdemux: Lower verbosity of some often happenning warnings
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6011>

2024-01-28 11:15:01 +0000  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  meson: bump Meson requirement to >= 1.1 for all modules
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6002>

2024-01-25 20:13:51 +0100  Jonas Kvinge <jonas@jkvinge.net>

	* ext/taglib/meson.build:
	  meson: Set cpp_std to c++17 for TagLib
	  TagLib uses C++17 as of version 2.0.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5995>

2024-01-02 16:18:05 +0100  Mathieu Duponchelle <mathieu@centricular.com>

	* ext/vpx/gstvpxenc.c:
	  vpxenc: fix warning about decreasing PTS on first frame
	  The fields used to track this state should be initialized when
	  codec->inited is FALSE on set_format, not TRUE
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3200
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5876>

2024-01-17 15:59:15 +0100  Jonas K Danielsson <jonas.danielsson@spiideo.com>

	* gst/multifile/gstsplitutils.c:
	  splitmuxsrc: Use natural ordering to find files
	  Today when using the `splitmuxsrc` on a collection of files named as:
	  ```
	  item0.mkv
	  item1.mkv
	  item2.mkv
	  [...]
	  item10.mkv
	  item11.mkv
	  [...]
	  ```
	  You will get a continuous stream made in the order of:
	  ```
	  item0.mkv -> item1.mkv -> item10.mkv -> item11.mkv -> [...]
	  ```
	  You can fix this by having smarter names of the items:
	  ```
	  item000.mkv
	  item001.mkv
	  item002.mkv
	  [...]
	  item010.mkv
	  item011.mkv
	  [...]
	  ```
	  Will get you:
	  ```
	  item000.mkv -> item001.mkv -> item003.mkv -> item004.mkv -> [...]
	  ```
	  But, we could also "fix" the former case by using natural ordering when
	  comparing the files in gstsplitutils.c.
	  Fixes #2523
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4491>

2024-01-22 17:01:19 -0500  Dan Searles <Dan.Searles@garmin.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: fix ttl setting for udpsink[1]
	  Fix ttl setting being incorrectly applied to udpsink[0] rather
	  than to udpsink[1].
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5955>

2024-01-22 12:18:25 -0500  Dan Searles <Dan.Searles@garmin.com>

	* gst/rtsp/gstrtspsrc.c:
	  rtspsrc: set multicast-iface on udpsinks
	  Copy rtspsrc property multicast-iface to its udpsinks to
	  allow messages over those sinks back to the server to work (and
	  prevent 'Network unreachable' warnings).
	  Closes: #3239
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5955>

2024-01-18 16:54:22 +0100  Guillaume Desmottes <guillaume.desmottes@onestream.live>

	* gst/flv/gstflvdemux.c:
	  flvdemux: don't re-use segment from one stream if the other has buffer earlier
	  Fix first audio buffers being out of segment because the audio stream
	  is starting earlier than the video one which was the first demuxed.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5940>

2024-01-18 16:50:20 +0100  Guillaume Desmottes <guillaume.desmottes@onestream.live>

	* gst/flv/gstflvdemux.c:
	  flvdemux: factor out ensure_new_segment()
	  - Use the pad instead of the element for logs, so it's clearer on which
	  pad this segment will be pushed.
	  - One copy was checking for invalid seq num, the other was not.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5940>

2024-01-11 14:29:49 +0900  Hou Qi <qi.hou@nxp.com>

	* gst/rtpmanager/rtpjitterbuffer.c:
	  rtpjitterbuffer: Fix build warning in rtp_jitter_buffer_append_query()
	  This is to fix build warnings when using [-Wmaybe-uninitialized]
	  ../gst/rtpmanager/rtpjitterbuffer.c:1237:10: warning: 'head' may be used uninitialized [-Wmaybe-uninitialized]
	  1237 |   return head;
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5907>

2024-01-12 12:51:27 +0000  Philippe Normand <philn@igalia.com>

	* ext/vpx/gstvpxdec.c:
	  vpxdec: Use appropriate domain and code for decoding errors
	  STREAM domain and DECODE error is commonly used in other decoders. ENCODE is for
	  encoders.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5916>

2024-01-10 19:10:55 -0500  Olivier Crête <olivier.crete@collabora.com>

	* ext/soup/gstsouploader.c:
	  soup: Avoid using GUri before GLib 2.66
	  Let's use gpointer for now
	  Fixes: #3169
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5906>

2024-01-08 11:04:22 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtpmanager/rtpsession.c:
	* gst/rtpmanager/rtpsession.h:
	  rtpsession: Remove some unused fields
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5899>

2023-11-16 11:42:27 +0530  Sanchayan Maity <sanchayan@asymptotic.io>

	* gst/rtpmanager/gstrtphdrext-clientaudiolevel.c:
	  rtphdrext-clientaudiolevel: Fix level value being written by the extension
	  When level value is greater than 127, it was being clamped but this clamped
	  value was not the one being actually used. For level values greater than 127
	  this resulted in an incorrect value being used. As an example, a level value
	  of 187, after and'ed with 0x7F, it would result in 0x3B being reported as the
	  level value.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5893>

2023-12-23 11:03:51 +0100  Tim-Philipp Müller <tim@centricular.com>

	* docs/gst_plugins_cache.json:
	* ext/vpx/plugin.c:
	  vpx: fix plugin description
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5864>

2023-12-22 12:56:33 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtpmanager/gstrtpsession.c:
	  rtpsession: Only warn once if configured latency needs to be known but isn't yet
	  Otherwise we would warn about this once for every single packet until
	  the LATENCY event is received.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5854>

2023-12-25 18:36:44 +0100  Tim-Philipp Müller <tim@centricular.com>

	* docs/gst_plugins_cache.json:
	* gst/rtp/gstrtpvrawdepay.c:
	  rtpvrawdepay: only announce supported formats in sink template
	  For most video formats we currently just assume that they
	  have a depth of 8 bits, whilst advertising that we can
	  handle 8/10/12/16 bit depth.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5866>

2023-12-15 21:52:03 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst/rtp/gstrtpvp8pay.c:
	  rtpvp8pay: Also set partition IDs in the packets if meta exists but without temporal_scalability
