=== release 1.22.9 ===

2024-01-24 18:21:13 +0000  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-bad.doap:
	* meson.build:
	  Release 1.22.9

2024-01-24 12:36:48 +0000  Philippe Normand <philn@igalia.com>

	* gst/videoparsers/gstvp9parse.c:
	  vp9parse: Fix critical warning during caps negotiation
	  `gst_pad_get_allowed_caps()` returns a non-writable caps, so we need to make it
	  writable, otherwise the `gst_caps_remove_structure()` call below might trigger a
	  critical warning.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5976>

2024-01-10 03:33:59 +0900  Seungha Yang <seungha@centricular.com>

	* gst-libs/gst/codecparsers/gstav1parser.c:
	  av1parser: Fix potential stack overflow during tile list parsing
	  The tile_count_minus_1 must be less than or equal to 511 as specified
	  in spec "6.11.1 General tile list OBU semantics"
	  Fixes #3214 / CVE-2024-0444 / ZDI-CAN-22873
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5971>

2023-12-06 21:25:44 +0900  Seungha Yang <seungha@centricular.com>

	* gst-libs/gst/codecs/gsth264decoder.c:
	  h264decoder: Handle malformed avc/avc3 packets
	  Packetized stream format should not contain start-code prefix
	  in bitstream and each [nal-length-byte, nal-byte] unit should consist of
	  single nal unit. But there are malformed streams in the world.
	  Use newly added gst_h264_parser_identify_and_split_nalu_avc()
	  method to identify each nal unit.
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3219
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5934>

2023-12-06 21:23:08 +0900  Seungha Yang <seungha@centricular.com>

	* gst-libs/gst/codecparsers/gsth264parser.c:
	* gst-libs/gst/codecparsers/gsth264parser.h:
	* tests/check/libs/h264parser.c:
	  h264parser: Add gst_h264_parser_identify_and_split_nalu_avc() method
	  Equivalent to _split_nalu_hevc() method in h265parser. This method
	  will scan start-code prefix and split into individual NAL units
	  if start-code prefix is detected
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5934>

2023-12-09 16:26:22 +0100  Marek Vasut <marex@denx.de>

	* sys/v4l2codecs/gstv4l2codecmpeg2dec.c:
	  mpeg2decoder: Fix multiplication wraparound
	  The GstMpeg2Picture system_frame_number is guint32, constant 1000 is guint32,
	  GstV4l2CodecMpeg2Dec *_ref_ts multiplication result is u64 .
	  ```
	  u64 result = (u32)((u32)system_frame_number * (u32)1000);
	  ```
	  behaves the same as
	  ```
	  u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
	  ```
	  so in case `system_frame_number > 4294967295 / 1000`, the `result` will
	  wrap around. Since the `result` is really used as a cookie used to look
	  up V4L2 buffers related to the currently decoded frame, this wraparound
	  leads to visible corruption during MPEG2 decoding. At 30 FPS this occurs
	  after cca. 40 hours of playback .
	  Fix this by changing the 1000 from u32 to u64, i.e.:
	  ```
	  u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
	  ```
	  this way, the wraparound is prevented and the correct cookie is used.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5850>

2023-12-09 16:08:31 +0100  Marek Vasut <marex@denx.de>

	* sys/v4l2codecs/gstv4l2codecvp9dec.c:
	  vp9decoder: Fix multiplication wraparound
	  The GstVp9Picture system_frame_number is guint32, constant 1000 is guint32,
	  GstV4l2CodecVp9Dec v4l2_vp9_frame.*_frame_ts multiplication result is u64 .
	  ```
	  u64 result = (u32)((u32)system_frame_number * (u32)1000);
	  ```
	  behaves the same as
	  ```
	  u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
	  ```
	  so in case `system_frame_number > 4294967295 / 1000`, the `result` will
	  wrap around. Since the `result` is really used as a cookie used to look
	  up V4L2 buffers related to the currently decoded frame, this wraparound
	  leads to visible corruption during VP9 decoding. At 30 FPS this occurs
	  after cca. 40 hours of playback .
	  Fix this by changing the 1000 from u32 to u64, i.e.:
	  ```
	  u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
	  ```
	  this way, the wraparound is prevented and the correct cookie is used.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5850>

2023-12-09 16:08:31 +0100  Marek Vasut <marex@denx.de>

	* sys/v4l2codecs/gstv4l2codecvp8dec.c:
	  vp8decoder: Fix multiplication wraparound
	  The GstVp8Picture system_frame_number is guint32, constant 1000 is guint32,
	  GstV4l2CodecVp8Dec v4l2_vp8_frame.*_frame_ts multiplication result is u64 .
	  ```
	  u64 result = (u32)((u32)system_frame_number * (u32)1000);
	  ```
	  behaves the same as
	  ```
	  u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
	  ```
	  so in case `system_frame_number > 4294967295 / 1000`, the `result` will
	  wrap around. Since the `result` is really used as a cookie used to look
	  up V4L2 buffers related to the currently decoded frame, this wraparound
	  leads to visible corruption during VP8 decoding. At 30 FPS this occurs
	  after cca. 40 hours of playback .
	  Fix this by changing the 1000 from u32 to u64, i.e.:
	  ```
	  u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
	  ```
	  this way, the wraparound is prevented and the correct cookie is used.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5850>

2023-12-11 15:26:11 +0100  Víctor Manuel Jáquez Leal <vjaquez@igalia.com>

	* gst-libs/gst/va/gstvaallocator.c:
	  vaallocator: only i965 can switch derived/non-derived at mapping
	  Since newer drivers change the strides and offset, and they have to be defined
	  at allocation time because those parameters are stored in the GstVideoMeta in
	  the buffer pool.
	  Thinks patch is based on commit 6b1fba14 and commit 809a984b
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5778>

2023-07-13 16:56:56 +0800  Mengkejiergeli Ba <mengkejiergeli.ba@intel.com>

	* gst-libs/gst/va/gstvaallocator.c:
	  vaallocator: let pool alloc_info be consitent with the test order in gst_va_allocator_try
	  In gst_va_allocator_try, the first try is to use derive_image, if it
	  succeeds, we should use info from derived image to create bufferpool.
	  If derive fails, then try create_image and give created image info
	  to the pool.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5778>

2023-12-04 20:05:48 +0100  Víctor Manuel Jáquez Leal <vjaquez@igalia.com>

	* gst-libs/gst/va/gstvaallocator.c:
	  vaallocator: force non-derived for old mesa drivers
	  Mesa <23.3 can't map derived images for P010 format. This patch forces
	  non-derived if this is the case.
	  See: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24381
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5778>

2023-11-30 16:52:02 +0100  Víctor Manuel Jáquez Leal <vjaquez@igalia.com>

	* gst-libs/gst/va/vasurfaceimage.c:
	  va: check surface status before get derive image
	  According with documentation the surface has to be in ready state before getting
	  it derived image. This patch adds that check.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5778>

2023-11-30 12:00:27 +0100  Víctor Manuel Jáquez Leal <vjaquez@igalia.com>

	* gst-libs/gst/va/gstvaallocator.c:
	  vaallocator: don't fail if drm fourcc are different
	  When exporting a DMABuf from a VASurface the user might tell that the surface
	  was allocated with certain fourcc, but the returned VADRMPRIMESurfaceDescriptor
	  migth tell a different fourcc, as in the case or radeonsi driver, for duplicated
	  fourcc, such as YUY2 and YUYV.
	  Originally it was supposed to be a failed exportation. This patch relax this
	  validation by allowing different fourcc.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5778>

2023-11-18 18:51:04 +0100  Robert Mader <robert.mader@collabora.com>

	* gst/camerabin2/gstcamerabin2.c:
	  camerabin: Correctly relink viewfinderbin_queue
	  This reverts a part of de92a6c7f2. Unlike `image_filter` and
	  `video_filter`, `viewfinder_filter` does not get linked to `src` but
	  `viewfinderbin_queue`. Thus the fix in the mentioned commit does not
	  apply for it and should be reverted.
	  This was not spotted earlier as only the other filters are used in
	  the project that uncovered the issue.
	  Fixes: de92a6c7f2 ("camerabin: Fix source updates with user filters")
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5842>

2023-12-18 17:01:36 +0000  Philippe Normand <philn@igalia.com>

	* gst-libs/gst/play/gstplay.c:
	  play: Fix error details parsing
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5831>

2023-12-18 13:52:12 +0000  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5826>

=== release 1.22.8 ===

2023-12-18 12:09:37 +0000  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-bad.doap:
	* meson.build:
	  Release 1.22.8

2023-11-23 20:24:42 +0900  Seungha Yang <seungha@centricular.com>

	* gst-libs/gst/codecparsers/gstav1parser.h:
	* gst/videoparsers/gstav1parse.c:
	  av1parser: Fix array sizes in scalability structure
	  Since the AV1 specification is not explicitly mentioning about
	  the array size bounds, array sizes in scalability structure
	  should be defined as possible maximum sizes that can have.
	  Also, this commit removes GST_AV1_MAX_SPATIAL_LAYERS define from
	  public header which is API break but the define is misleading
	  and this patch is introducing ABI break already
	  ZDI-CAN-22300
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5824>

2023-12-05 19:52:22 +0900  Seungha Yang <seungha@centricular.com>

	* sys/nvcodec/gstnvdec.c:
	  nvdec: Fix division by zero when calculating buffer duration
	  Don't try to calculate buffer duration from variable framerate
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5774>

2023-11-08 09:53:17 +0000  HuQian <qian.hu@mediatek.com>

	* gst-libs/gst/wayland/gstwlvideoformat.c:
	  waylandsink: fix incorrect RGB and BGR mapping about GST DRM and WL_SHM
	  This commit corrects the mapping relationship between RGB and BGR in GST and DRM.
	  The previous mapping was incorrect, causing potential color mismatches in the output.
	  The changes are as follows:
	  {WL_SHM_FORMAT_RGB888, DRM_FORMAT_RGB888, GST_VIDEO_FORMAT_BGR},
	  {WL_SHM_FORMAT_BGR888, DRM_FORMAT_BGR888, GST_VIDEO_FORMAT_RGB},
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5792>

2023-12-10 04:26:59 +0100  Stefan Brüns <stefan.bruens@rwth-aachen.de>

	* ext/ladspa/meson.build:
	* meson_options.txt:
	  ladspa: Make RDF parsing truely optional
	  If the ladspa plugin is enabled explicitly or via auto-features, the
	  liblrdf dependency can not be disabled.
	  As the RDF parsing currently provides hardly any features, the possibility
	  to disable it fairly useful.
	  Fixes: #3168
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5802>

2023-07-28 00:39:46 +0900  Seungha Yang <seungha@centricular.com>

	* gst/onvif/gstrtponviftimestamp.c:
	  rtponviftimestamp: Fix drop-out-of-segment=false mode
	  Fixing unexpected buffer dropping and flow error in case that:
	  * use-reference-timestamps=false
	  * drop-out-of-segment=false
	  * Calculated utc offset is not valid because buffer is out-of-segment
	  The above case should be considered as a valid data flow without returning
	  errors.
	  Fixing regression introduced by
	  https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1683
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5788>

2023-12-05 09:28:25 +0100  Guillaume Desmottes <guillaume.desmottes@onestream.live>

	* meson.build:
	  meson: update PACKAGE_BUGREPORT
	  Some were still using pre-monorepo links.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5786>

2023-07-17 16:21:47 +0000  Rabindra Harlalka <13387-rabindra-harlalka@users.noreply.gitlab.freedesktop.org>

	* ext/aes/gstaesenc.c:
	  aesenc: Fix IV length addition to output buffer length
	  Add length of IV to output buffer length only for the first buffer.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5785>

2023-12-06 12:01:36 +0100  Alessandro Bono <alessandro.bono369@gmail.com>

	* ext/dtls/gstdtlscertificate.c:
	  gstdtlscertificate: Define _WINSOCKAPI_ before including windows.h
	  This avoid a build failure when compiling against OpenSSL 3.2.0. The
	  problem is when windows.h is included before WinSock2.h. Because
	  windows.h includes winsock.h[1]. Defining _WINSOCKAPI_ stops windows.h
	  including winsock.h.
	  Error:
	  ```
	  [748/1041] Compiling C object ext/dtls/gstdtls.dll.p/gstdtlscertificate.c.obj
	  FAILED: ext/dtls/gstdtls.dll.p/gstdtlscertificate.c.obj
	  [...]
	  Windows Kits\10\include\10.0.17763.0\shared\ws2def.h(235): error C2011: 'sockaddr': 'struct' type redefinition
	  Windows Kits\10\include\10.0.17763.0\um\winsock.h(482): note: see declaration of 'sockaddr'
	  ```
	  [1] https://stackoverflow.com/a/1372836
	  Closes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3167
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5783>

2023-12-07 15:36:26 +0100  Alexander Slobodeniuk <aslobodeniuk@fluendo.com>

	* sys/d3d11/meson.build:
	  d3d11: fix building with address sanitizer
	  When building with address sanitizer it gives next error:
	  "gstd3d11window_corewindow.cpp : fatal error C1128: number of sections
	  exceeded object file format limit: compile with /bigobj"
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5782>

2023-11-21 14:26:54 +0100  Benjamin Gaignard <benjamin.gaignard@collabora.com>

	* gst-libs/gst/codecparsers/gstav1parser.c:
	  codecparsers: av1: Clip max tile rows and cols values
	  Clip tile rows and cols to 64 as describe in AV1 specification
	  to avoid writing outside array range but preserve sb_cols
	  and sb_rows value which are used to futher computation.
	  Fixes ZDI-CAN-22226 / CVE-2023-44429
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5734>

2023-11-21 14:04:49 +0100  Benjamin Gaignard <benjamin.gaignard@collabora.com>

	* gst-libs/gst/codecparsers/gstav1parser.c:
	  Revert "codecparsers: av1: Clip max tile rows and cols values"
	  This reverts commit b76a801f57353b893c344025cac56413140fca6d.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5734>

2023-11-21 01:41:16 +0900  Seungha Yang <seungha@centricular.com>

	* gst-libs/gst/codecs/gsth264decoder.c:
	  h264decoder: Fix GstVideoCodecFrame leak
	  If current buffer has no slice data, frame should be released.
	  Otherwise frames will stay in decoder baseclass forever.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5733>

2023-11-21 21:14:12 +0900  Seungha Yang <seungha@centricular.com>

	* sys/qsv/gstqsvh264dec.cpp:
	* sys/qsv/gstqsvh265dec.cpp:
	  qsvdecoder: Fix stream format detection
	  Fixing typo
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5711>

2023-10-22 11:06:27 +0200  Robert Mader <robert.mader@collabora.com>

	* gst/camerabin2/gstcamerabin2.c:
	  camerabin: Fix source updates with user filters
	  Take the case into account when user filters have been set before the
	  source gets updated.
	  Note that the further linking of the filters, if present, happens below
	  in the `gst_camera_bin_check_and_replace_filter()` calls.
	  The audio filter is still affected by the same issue but left out for
	  now.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5682>

2023-11-15 22:41:47 +0900  Seungha Yang <seungha@centricular.com>

	* sys/d3d11/gstd3d11dxgicapture.cpp:
	* sys/d3d11/gstd3d11screencapture.cpp:
	* sys/d3d11/gstd3d11screencapture.h:
	* sys/d3d11/gstd3d11screencapturedevice.cpp:
	* sys/d3d11/gstd3d11screencapturesrc.cpp:
	* sys/d3d11/gstd3d11winrtcapture.cpp:
	  d3d11screencapturesrc: Fix wrong color with HDR enabled
	  Even if IDXGIOutput6 says current display colorspace is HDR,
	  captured texture via IDXGIOutputDuplication::AcquireNextFrame()
	  is converted frame by OS unless we use IDXGIOutput5::DuplicateOutput1()
	  with DXGI_FORMAT_R16G16B16A16_FLOAT format, in order for captured
	  frame to be scRGB color space. Then application should perform
	  tonemap operation based on reported display white level, color primaries, etc.
	  Since we don't have any tonemapping implementation, ignores colorimetry
	  reported by IDXGIOutput6.
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3128
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5679>

2023-11-15 19:13:08 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst-libs/gst/player/gstplayer.c:
	  player: Without dispatcher emit signals directly instead of via the default main context
	  This is how it was documented and how it worked before the port to GstPlay.
	  Without this, applications expecting signals to be emitted directly
	  without anything running the main context will simply not receive any
	  signals.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5673>

2022-08-08 14:46:16 -0400  Olivier Crête <olivier.crete@collabora.com>

	* ext/webrtc/webrtcsdp.c:
	  webrtcsdp: Don't require fingerprint in inactive media
	  Inactive m-lines don't need a fingerprint as they may not
	  have a connection.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5663>

2021-10-12 11:29:21 -0400  Olivier Crête <olivier.crete@collabora.com>

	* ext/webrtc/webrtcsdp.c:
	  webrtcsdp: Remove comparison between media and session fingerprint
	  The code seems to validate that the media-level fingerprint matches
	  the fingerprint of the previous media or of the whole session. There
	  is no such requirement in any RFC I found. The session-session one
	  is just meant to act as a fallback when there is no media-level
	  fingerprint.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5663>

2023-11-11 14:10:37 +0200  Sebastian Dröge <sebastian@centricular.com>

	* gst-libs/gst/play/gstplay-signal-adapter.c:
	  play: Automatically flush the bus when disposing the signal adapter
	  See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3107
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5653>

2023-11-13 14:57:09 +0000  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5650>

=== release 1.22.7 ===

2023-11-13 11:04:22 +0000  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-bad.doap:
	* meson.build:
	  Release 1.22.7

2023-10-20 00:09:57 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/mxf/mxfdemux.c:
	* gst/mxf/mxfdemux.h:
	  mxfdemux: Store GstMXFDemuxEssenceTrack in their own fixed allocation
	  Previously they were stored inline inside a GArray, but as references to
	  the tracks were stored in various other places although the array could
	  still be updated (and reallocated!), this could lead to dangling
	  references in various places.
	  Instead now store them in a GPtrArray in their own allocation so each
	  track's memory position stays fixed.
	  Fixes ZDI-CAN-22299
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3055
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5638>

2023-10-04 11:14:38 +0200  Benjamin Gaignard <benjamin.gaignard@collabora.com>

	* gst-libs/gst/codecparsers/gstav1parser.c:
	  codecparsers: av1: Clip max tile rows and cols values
	  Clip tile rows and cols to 64 as describe in AV1 specification.
	  Fixes ZDI-CAN-22226 / CVE-2023-44429
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3015
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5637>

2023-10-06 13:49:15 +0200  Guillaume Desmottes <guillaume.desmottes@onestream.live>

	* gst/audiobuffersplit/gstaudiobuffersplit.c:
	  audiobuffersplit: disable max-silence-time if set to 0
	  According to the property documentation max-silence-time is supposed to be
	  disabled when set to 0 but it was not.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5632>

2023-05-26 17:38:13 +0000  Balló György <ballogyor@gmail.com>

	* gst-libs/gst/wayland/meson.build:
	  gstwayland: Don't depend on wayland-protocols
	  wayland-protocols are needed to build gstwayland, but not for dependent projects.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5618>

2023-11-04 19:36:06 +0900  Seungha Yang <seungha@centricular.com>

	* sys/wasapi2/gstwasapi2client.cpp:
	* sys/wasapi2/gstwasapi2client.h:
	* sys/wasapi2/gstwasapi2device.c:
	  wasapi2device: Ignore activation failed device
	  Enumerates all devices even if activation error is detected
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3090
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5609>

2023-10-28 22:55:04 +0800  He Junyan <junyan.he@intel.com>

	* docs/plugins/gst_plugins_cache.json:
	* ext/libde265/libde265-dec.c:
	  libde265dec: Only decode the main profile
	  The src caps of the libde265 is now fixed to I420, and so if the
	  stream is other format, such as 4:4:4 or 10 bits format, the pipeline
	  will crash because the dowstream element accesses the video buffer as
	  I420 format.
	  We now restrain the input caps to "main" profile, which only contains
	  4:2:0 8 bits stream.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5596>

2023-11-04 03:16:47 +0100  Marek Vasut <marex@denx.de>

	* sys/v4l2codecs/gstv4l2decoder.c:
	  v4l2codecs: Avoid QBUF/DQBUF struct timeval .tv_usec wrap-around at frame 1000000
	  When decoding stream using hardware V4L2 decoder element, in any of the
	  currently supported formats, the decoding will fail once frame number
	  1000000 is reached. The reported error clearly indicates a wrap-around
	  occured, instead of receiving decoded frame 1000000, frame 0 is received
	  from the hardware V4L2 decoder driver.
	  The problem is actually not in the driver itself, but rather in gstreamer,
	  which uses `struct v4l2_buffer` member `.timestamp` in a special way. The
	  timestamp of buffers with encoded data added to the SINK (input) queue of
	  the driver is copied by the driver into matching buffers with decoded data
	  added to the SOURCE (output) queue of the driver. In fact, the timestamp
	  is not a timestamp at all, but rather in this special case, only part of
	  it is used as an incrementing frame counter.
	  The `.timestamp` is of type `struct timeval`, which is defined in
	  `sys/time.h` [1]. Only the `tv_usec` member of this structure is used
	  for the incrementing frame counter. However, suseconds_t tv_usec [2]
	  may be limited to range [-1, 1000000]:
	  "
	  [XSI] The type suseconds_t shall be a signed integer type capable of
	  storing values at least in the range [-1, 1000000].
	  "
	  Therefore, once frame 1000000 is reached, a rollover occurs and decoding
	  fails.
	  Fix this by using both `struct timeval` members, `.tv_sec` and `.tv_usec`
	  with matching modular arithmetic, this way the failure would occur again
	  just short of 2^84 frames, which should be plenty.
	  [1] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_time.h.html
	  [2] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_types.h.html
	  A test case using stateless hardware h264 decoder, the WARN/ERROR output
	  in gstreamer log indicates a failure occurred. With this change, that
	  error no longer occurs and the WARN/ERROR are not present:
	  ```
	  pc$ gst-launch-1.0 videotestsrc num-buffers=1001001 pattern=6 ! \
	  video/x-raw,width=16,height=16,format=I420 ! \
	  x264enc ! filesink location=/tmp/test.h264
	  dut$ GST_DEBUG="*:3" gst-launch-1.0 filesrc location=/tmp/test.h264 ! \
	  h264parse ! v4l2slh264dec ! fakesink
	  ...
	  0:03:51.393677606 12111     0x370df400 WARN      \
	  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
	  Requested frame 1000000, but driver returned frame 0.
	  0:03:51.394140597 12111     0x370df400 WARN      \
	  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
	  Requested frame 1000001, but driver returned frame 1.
	  0:03:51.394425216 12111     0x370df400 WARN      \
	  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
	  Requested frame 1000002, but driver returned frame 2.
	  0:03:51.394665211 12111     0x370df400 WARN      \
	  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
	  Requested frame 1000003, but driver returned frame 3.
	  0:03:51.394785833 12111     0x370df400 WARN      \
	  v4l2codecs-h264dec gstv4l2codech264dec.c:1059:gst_v4l2_codec_h264_dec_output_picture:<v4l2slh264dec0> \
	  error: Failed to decode frame 1000000
	  ERROR: from element /GstPipeline:pipeline0/v4l2slh264dec:v4l2slh264dec0: Failed to decode frame 1000000
	  ```
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5603>

2023-10-31 17:59:32 +0100  Kalev Lember <klember@redhat.com>

	* ext/openh264/gstopenh264dec.cpp:
	* ext/openh264/gstopenh264enc.cpp:
	  openh264: Fail gracefully if openh264 encoder/decoder creation fails
	  This can happen with the dummy "noopenh264" library that the freedesktop
	  flatpak runtime ships, and Fedora is planning on shipping as well. In
	  both cases the dummy implementation gets replaced with the actual
	  openh264 library that's downloaded directly from Cisco, but just to be
	  on safe side, this patch makes it careful to check the return values to
	  avoid crashing if the underlying library hasn't been swapped out yet.
	  The patch is taken from freedesktop-sdk and was originally written by
	  Valentin David <valentin.david@codethink.co.uk>.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5586>

2023-10-25 21:37:24 +0900  Seungha Yang <seungha@centricular.com>

	* sys/wasapi2/gstwasapi2ringbuffer.cpp:
	  wasapi2: Don't use global volume control object
	  ISimpleAudioVolume controls volume of corresponding audio session
	  and there would be only single input/output audio session
	  in case of share-mode, which means that it controls audio volume of the
	  process. Instead, use IAudioStreamVolume interface which controls
	  volume of the stream.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5579>

2023-10-29 22:42:52 +0900  Seungha Yang <seungha@centricular.com>

	* sys/d3d11/gstd3d11window_win32.cpp:
	  d3d11videosink: Fix window switching in case of fullscreen mode
	  Other Windows applications allow window switching even when
	  an application window is in fullscreen mode. Also fixing
	  regression introduced in 15248d8b84db9e79e6d4587b212b12ca82fc4a6b
	  which makes restored window is always located at topmost
	  since we do not call SetWindowPos() anymore when restoring
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5578>

2023-10-28 01:23:36 +0900  Seungha Yang <seungha@centricular.com>

	* sys/d3d11/gstd3d11screencapturesrc.cpp:
	  d3d11screencapturesrc: Fix mouse cursor blending
	  Ignore alpha component of source (mouse cursor texture)
	  when blending alpha channel, otherwise the background area of source
	  (which has zeros) will be written to render target. Then it will result
	  in black rectangle if output texture is converted to premultiplied alpha
	  texture
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5577>

2023-10-25 23:19:51 +0900  Seungha Yang <seungha@centricular.com>

	* sys/mediafoundation/gstmfvideoencoder.cpp:
	  mfvideoencoder: Fix typo in template caps
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3058
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5556>

2023-10-10 10:39:55 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/gstatscmux.c:
	* gst/mpegtsmux/tsmux/tsmuxstream.c:
	* gst/mpegtsmux/tsmux/tsmuxstream.h:
	  tsmux: Fix default get_es_descrs_func
	  `tsmux_stream_default_get_es_descrs` is missing the `user_data`
	  parameter and shouldn't be cast to `TsMuxStreamGetESDescriptorsFunc`.
	  Prefer not casting at all to make sure we don't miss such an issue.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>

2023-10-10 10:22:44 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/gstatscmux.c:
	* gst/mpegtsmux/tsmux/tsmux.c:
	* gst/mpegtsmux/tsmux/tsmux.h:
	  tsmux: Fix default new_stream_func
	  `tsmux_stream_new` is missing the `user_data` parameter and shouldn't be
	  cast to `TsMuxNewStreamFunc`.
	  Prefer not casting at all to make sure we don't miss such an issue.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>

2023-10-10 10:12:44 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/tsmux/tsmuxstream.h:
	  tsmux: Add missing include
	  We need `GstMpegtsPMTStream` here.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>

2023-10-17 00:57:56 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/tsmux/tsmux.c:
	  tsmux: Simplify tsmux_section_write_packet
	  - Don't try to make the parameters match `GHFunc`. Use a dedicated
	  callback for `g_hash_table_foreach`.
	  - Don't try to be clever with buffer memories. We're allocating a full
	  packet anyway, might as well memcpy and save on a lot of complexity.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>

2023-10-17 00:54:38 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/tsmux/tsmux.c:
	  tsmux: tsmux_packet_out should always consume its buffer
	  Consuming the buffer only when successful is an antipattern and easily
	  leads to leaks.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>

2023-10-16 23:54:20 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/tsmux/tsmux.c:
	  tsmux: Don't memset in pad_stream when writing a PCR packet
	  tsmux_write_ts_header will write a stuffing adaptation field, so we
	  don't need to prefill the buffer.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>

2023-10-16 23:52:48 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/tsmux/tsmux.c:
	  tsmux: Move out parameters of tsmux_write_ts_header
	  Move them to the end of the parameter list and also allow passing NULLs
	  to ignore the payload information, but assert that the payload length is
	  zero in this case.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>

2023-10-16 23:50:16 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/tsmux/tsmux.c:
	  tsmux: Fix two more uses of gst_buffer_map
	  The buffers should be used for writing.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>

2023-10-16 15:41:48 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/tsmux/tsmux.c:
	  tsmux: Fix error handling in pad_stream
	  Don't leak the map or the buffer if we encounter an error.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5513>

2023-10-16 15:31:04 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/mpegtsmux/tsmux/tsmux.c:
	  tsmux: Fill padding packets with stuffing bytes
	  Instead of leaving it uncleared, emitting probably old packet data but
	  potentially also random or sensitive application data.
	  Also fix the mapping mode.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5513>

2023-10-17 14:56:34 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* sys/v4l2codecs/gstv4l2codech265dec.c:
	  v4l2codecs: h265: Fix entry_point_offsets array leak
	  This array was being leaked.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5503>

2023-10-17 12:42:59 -0400  Detlev Casanova <detlev.casanova@collabora.com>

	* gst-libs/gst/codecs/gsth265decoder.c:
	  codecs: h265: Do not free slice header before using it
	  The v4l2codecs H.265 decoder uses the
	  GstH265SliceHdr::entry_point_offset_minus1 array so make sure that it is not
	  freed before decoding the frame.
	  Before this patch, some H.265 input would segfault in
	  gst_v4l2_codec_h265_dec_fill_slice_params() when executing the line:
	  guint32 entry_point_offset = slice_hdr->entry_point_offset_minus1[i] + 1;
	  Make sure that the array is not freed before using it.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5503>

2023-10-12 16:25:59 +0530  Rahul T R <r-ravikumar@ti.com>

	* sys/kms/gstkmssink.c:
	  kmssink: Add TIDSS auto-detection
	  Add Texas Instruments TIDSS display controller into list of
	  auto-detected modules.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5486>

2023-10-15 20:30:22 +0900  Seungha Yang <seungha@centricular.com>

	* gst-libs/gst/d3d11/gstd3d11converter.cpp:
	  d3d11converter: Fix 10/12bits planar output
	  Simple division can result in 10/12bits overflow.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5484>

2023-10-12 02:26:07 +0900  Seungha Yang <seungha@centricular.com>

	* sys/d3d11/gstd3d11window_win32.cpp:
	  d3d11videosink: Fix rendering with initial fullscreen state
	  Change fullscreen mode once the swapchain is fully configured
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5466>

2023-10-11 23:29:04 +0900  Seungha Yang <seungha@centricular.com>

	* sys/d3d11/gstd3d11window_win32.cpp:
	  d3d11videosink: Fix toggling between fullscreen and maximized
	  Use GetWindowPlacement() and SetWindowPlacement() APIs
	  to remember and restore window status, such as maximized, position,
	  restore position, etc.
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3016
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5466>

2023-10-10 15:43:07 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* sys/v4l2codecs/gstv4l2format.c:
	  v4l2codecs: Fix tiled formats stride conversion
	  While adding arbitrary tile support, a round up operation was badly
	  converter. This caused the Y component of the stride to be 0. This
	  eventually lead to a crash in glupoad preceded by the following
	  assertion.
	  gst_gl_buffer_allocation_params_new: assertion 'alloc_size > 0' failed
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5463>

2023-10-09 19:09:15 +0900  Seungha Yang <seungha@centricular.com>

	* sys/decklink/gstdecklink.h:
	  decklink: Fix broken COM string conversion
	  WideCharToMultiByte return is the string length without null terminate
	  character if passed "cchWideChar" does not include the null terminate
	  character size. Instead of passing the exact string length, pass -1 so that
	  the API can understand the input string is null terminated already and
	  returned value from the API includes the character.
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3023
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5446>

2023-10-05 13:34:14 +0800  James Oliver <james.oliver@icetana.com.au>

	* sys/nvcodec/gstnvh265encoder.cpp:
	  nvh265encoder: fix bounds for auto-select GPU enumeration
	  Fixes the bounds-check for encoder auto-select GPU enumeration to be
	  between 0-7 instead of 0-6. This should allow 8-GPU machines to work
	  with nvautogpuh265enc for the last enumerated GPU.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5439>

2023-10-05 13:29:49 +0800  James Oliver <james.oliver@icetana.com.au>

	* sys/nvcodec/gstnvh264encoder.cpp:
	  nvh264encoder: fix bounds for auto-select GPU enumeration
	  Fixes the bounds-check for encoder auto-select GPU enumeration to be
	  between 0-7 instead of 0-6. This should allow 8-GPU machines to work
	  with nvautogpuh264enc for the last enumerated GPU.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5439>

2023-09-27 12:33:39 +0200  Philippe Normand <philn@igalia.com>

	* gst/inter/gstinteraudiosink.c:
	  interaudiosink: Ensure adapters don't store buffers with audio meta
	  The interaudiosrc might take buffers of different sizes from the audio adapter,
	  so keeping metas consistency would be an issue. So the sink now strips the audio
	  metas away and the src adds them back (for non-interleaved layouts only) when
	  taking buffers from the adapter.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5416>

2023-09-13 15:11:32 +0100  Philippe Normand <philn@igalia.com>

	* gst/inter/gstinteraudiosrc.c:
	  interaudiosrc: Add audio meta to buffers containing non-interleaved samples
	  Without this a downstream audioconverter wouldn't be able to map the
	  GstAudioBuffer prior to conversion.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5416>

2023-09-27 01:12:01 +0900  Seungha Yang <seungha@centricular.com>

	* sys/d3d11/gstd3d11decoder.cpp:
	  d3d11decoder: Fix crash on negotiate() when decoder is not configured
	  The negotiate() can be called by GstVideoDecoder baseclass on GAP event,
	  and decoder helper object might not be configured at the time
	  when negotiate() is called.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5401>

2023-09-20 19:41:00 +0100  Tim-Philipp Müller <tim@centricular.com>

	* meson.build:
	  Back to development
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5371>

=== release 1.22.6 ===

2023-09-20 18:10:57 +0100  Tim-Philipp Müller <tim@centricular.com>

	* NEWS:
	* RELEASE:
	* gst-plugins-bad.doap:
	* meson.build:
	  Release 1.22.6

2023-08-10 15:47:03 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/mxf/mxfd10.c:
	  mxfdemux: Check number of channels for AES3 audio
	  Only up to 8 channels are allowed and using a higher number would cause
	  integer overflows when copying the data, and lead to out of bound
	  writes.
	  Also check that each buffer is at least 4 bytes long to avoid another
	  overflow.
	  Fixes ZDI-CAN-21661, CVE-2023-40475
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2897
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5365>

2023-08-10 15:45:01 +0300  Sebastian Dröge <sebastian@centricular.com>

	* gst/mxf/mxfup.c:
	  mxfdemux: Fix integer overflow causing out of bounds writes when handling invalid uncompressed video
	  Check ahead of time when parsing the track information whether
	  width, height and bpp are valid and usable without overflows.
	  Fixes ZDI-CAN-21660, CVE-2023-40474
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2896
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5365>

2023-08-09 12:49:19 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* gst-libs/gst/codecparsers/gsth265parser.c:
	  h265parser: Fix possible overflow using max_sub_layers_minus1
	  This fixes a possible overflow that can be triggered by an invalid value of
	  max_sub_layers_minus1 being set in the bitstream. The bitstream uses 3 bits,
	  but the allowed range is 0 to 6 only.
	  Fixes ZDI-CAN-21768, CVE-2023-40476
	  Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2895
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5366>

2023-09-11 18:12:28 +0200  Hugues Fruchet <hugues.fruchet@foss.st.com>

	* gst-libs/gst/wayland/gstwlwindow.c:
	  waylandsink: Fix cropping for video with non-square aspect ratio
	  Padding of unaligned content is still visible at right with some aspect-ratio.
	  Fix this by giving the original content resolution to wp_viewport_set_source()
	  instead of pixel aspect ratio scaled one.
	  Fixes !5259
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5360>

2023-09-14 01:18:59 +0900  Seungha Yang <seungha@centricular.com>

	* gst-libs/gst/codecs/gsth264decoder.c:
	* gst-libs/gst/codecs/gsth264picture.h:
	  h264decoder: Update latency dynamically
	  The actual number of reorder frames is unknown
	  unless frame reordering is disabled
	  (e.g., POC type 2 or constrained-* profiles).
	  Also derived maximum DPB size or max_num_reorder_frames in VUI
	  is not the upper bound of output delay.
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2702
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5341>

2023-08-16 13:43:56 +0000  L. E. Segovia <amy@amyspark.me>

	* sys/applemedia/avsamplevideosink.m:
	  applemedia: Also fix inconsistent pixel format definition for NV12
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5203>

2023-08-15 21:45:56 +0000  L. E. Segovia <amy@amyspark.me>

	* sys/applemedia/coremediabuffer.c:
	* sys/applemedia/corevideobuffer.c:
	  applemedia: Fix pixel format for I420
	  In Intel Macs, using full range 8-bit 4:2:0 YCbCr results in a failure on
	  initialization. I've validated this to be the correct pixel format with FFmpeg:
	  https://github.com/FFmpeg/FFmpeg/blob/8653dcaf7d665b15b40ea9a560c8171b0914a882/libavutil/hwcontext_videotoolbox.c#L45
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5203>

2023-08-24 12:12:09 +0200  Víctor Manuel Jáquez Leal <vjaquez@igalia.com>

	* sys/va/gstvadecoder.c:
	* sys/va/gstvadisplay_priv.c:
	  va: Fix in error logs functions mismatches
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5340>

2023-09-15 11:06:52 +1000  Matthew Waters <matthew@centricular.com>

	* sys/androidmedia/gstamcvideoenc.c:
	  androidmedia/enc: handle codec-data before popping GstVideoCodecFrames
	  Issue is that when amc was producing a codec-data buffer, a
	  GstVideoCodecFrame was being popped off the internal queue.  This meant
	  that the codec-data was being associated with the first input frame and
	  the second (first encoded buffer) output buffer with the second input
	  frame.  At the end (assuming one input produces one output which seems
	  to hold in my testing and how the encoder is currently implemented)
	  there would be an input frame missing and would be pushed without any
	  timing information.  This would lead to e.g. muxers rejecting the buffer
	  without PTS and failing to mux.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5335>

2023-09-15 11:06:07 +1000  Matthew Waters <matthew@centricular.com>

	* sys/androidmedia/gstamc-constants.h:
	* sys/androidmedia/gstamcvideoenc.c:
	  androidmedia/enc: add fixme log about partial frames
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5335>

2023-09-16 03:13:33 +0900  Seungha Yang <seungha@centricular.com>

	* gst-libs/gst/codecparsers/gstav1parser.c:
	  av1parser: Fix segmentation params update
	  Even if the segmentation feature value is not updated,
	  the parsed "segmentation_update_map" and "segmentation_temporal_update"
	  values should not be cleared as it's referenced during lower
	  level bitstream parsing. Also, don't use assert() in parser
	  unless it's clearly impossible condition.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5336>

2023-08-24 17:40:42 +0200  Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>

	* gst/rtmp2/rtmp/rtmpclient.c:
	  rtmp2: Allow NULL flash version, omitting the field
	  rtmpsink omits it by default. Allow us to do the same.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5248>

2023-09-05 14:15:04 +0200  Thomas Schneider <thomas.schneider@voliro.ch>

	* sys/androidmedia/gstamc.c:
	  androidmedia: fix hevc codec profile registration
	  Fix the codec registration logic such that all supported
	  profiles are available instead of just the first in the
	  list.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5313>

2023-09-03 13:21:30 +0000  Akihiro Sagawa <sagawa.aki@gmail.com>

	* gst-libs/gst/codecparsers/gstmpegvideoparser.c:
	  codecparsers: Fix MPEG-1 aspect ratio table
	  The values defined in ISO/IEC 11172-2 are different from those used so far.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5300>

2023-08-29 14:55:03 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* gst-libs/gst/wayland/gstwlwindow.c:
	  waylandsink: Crop surfaces to their display width height
	  Setting the surface source rectangle has been omitted so far. As a side effect
	  surface created with padded width/height are being scaled down. Fix this using
	  the viewporter source rectangle configuration. This can later be enhanced
	  to support crop meta.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5298>

2023-08-28 20:58:22 +0900  Seungha Yang <seungha@centricular.com>

	* sys/d3d11/gstd3d11convert.cpp:
	  d3d11convert: Passthrough allocation query on same caps
	  Since d3d11convert and its variant elements does not enable basetransform's
	  passthrough, passthrough allocation query needs to be handled
	  manually in order to respect downstream element's min/max buffer
	  requirement.
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5297>

2023-08-23 19:27:43 +0900  Seungha Yang <seungha@centricular.com>

	* sys/nvcodec/gstnvencoder.cpp:
	  nvencoder: Fix negotiation error when interlace-mode is unspecified
	  Use GST_PAD_SET_ACCEPT_INTERSECT() to accept caps without interlace-mode
	  field
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5240>

2023-08-23 18:07:31 +0900  Seungha Yang <seungha@centricular.com>

	* sys/win32ipc/protocol/win32ipcpipeserver.cpp:
	  win32ipc: Fix pipe handle leak
	  Named pipe handle must be closed if it's no longer needed
	  Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2923
	  Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5231>

