2021-05-08  Jay Berkenbilt  <ejb@ql.org>

	* 10.3.2: release

	* Fix problem that caused the generated manual from being included
	in the Windows distributions. Fixes #521.

	* Fix 11-year-old bug of leaving unreferenced objects in preserved
	object streams. Fixes #520.

2021-04-17  Jay Berkenbilt  <ejb@ql.org>

	* Portability fix: use tm_gmtoff rather than global timezone
	variable if available to get timezone offset. This fixes
	compilation on BSD and also results in a daylight saving
	time-aware offset for Linux or other GNU systems. Fixes #515.

2021-04-05  Jay Berkenbilt  <ejb@ql.org>

	* When adding a page, if the page already exists, make a shallow
	copy of the page instead of throwing an exception. This makes the
	behavior of adding a page from the library consistent with what
	the CLI does and also with what the library does if it starts with
	a file that already has a duplicated page. Note that this means
	that, in some cases, the page you pass to addPage or addPageAt
	(either in QPDF or QPDFPageDocumentHelper) will not be the same
	object that actually gets added. (This has actually always been
	the case.) That means that, if you are going to do subsequent
	modification on the page, you should retrieve it again.

2021-03-11  Jay Berkenbilt  <ejb@ql.org>

	* 10.3.1: release

	* Bug fix: allow /DR to be direct in /AcroForm

2021-03-04  Jay Berkenbilt  <ejb@ql.org>

	* 10.3.0: release

	* The last several changes are in support of fixing more complex
	cases of keeping form fields working properly through page copying
	operations. Fixes #509.

	* Deprecated QPDFAcroFormDocumentHelper::copyFieldsFromForeignPage
	-- use QPDFAcroFormDocumentHelper::fixCopiedAnnotations instead.
	The API for dealing with annotations and form fields around
	copying pages is extremely complex and very hard to get right. It
	is planned for a future version of qpdf to have a higher level
	interface for dealing with copying pages around and preserving
	document-level constructs.

	* Add QPDFAcroFormDocumentHelper::getFieldsWithQualifiedName for
	returning a list of fields by name.

	* Add QPDFAcroFormDocumentHelper::addAndRenameFormFields to add a
	collection of fields while ensuring that, within the collection,
	fields with the same name continue to have the same name, but that
	they don't conflict with exiting fields in the document.

	* Add QPDFAcroFormDocumentHelper::setFormFieldName for changing
	the name of a form field in a manner that preserves
	QPDFAcroFormDocumentHelper's cache.

2021-03-03  Jay Berkenbilt  <ejb@ql.org>

	* Handle /DR properly when copying form fields. This is a
	significant rework of the form field copying from 10.2.0. It
	ensures that when copy fields from different files, we resolve any
	conflicting names in resources.

	* Add QPDFMatrix::operator==

	* Add QPDFObjectHandle::makeResourcesIndirect

2021-03-02  Jay Berkenbilt  <ejb@ql.org>

	* Add an optional resource_names argument to getUniqueResourceName
	for added efficiency.

	* Add conflict detection QPDFObjectHandle::mergeResources.

2021-03-01  Jay Berkenbilt  <ejb@ql.org>

	* Improve code that finds unreferenced resources to ignore names
	in the content stream that are not fonts or XObjects. This should
	reduce the number of cases when qpdf needlessly decides not to
	remove unreferenced resources. Hopefully it doesn't create any new
	bugs where it removes unreferenced resources that it isn't
	supposed to.

	* Add QPDF::numWarnings() -- useful to tell whether any warnings
	were issued by a specific bit of code.

2021-02-26  Jay Berkenbilt  <ejb@ql.org>

	* Bug fix: QPDFFormFieldObjectHelper was mis-handling /DA, /Q, and
	/DR in ways that usually didn't matter but were still wrong. /DA
	and /Q were being found in the field hierarchy, but if not found,
	the default values in the /AcroForm dictionary were not being
	used. /DR was being treated as an inherited field in the field
	dictionary, which is wrong. It is actually supposed to come from
	the /AcroForm dictionary. We were getting away with this since
	many popular form writers seem to copy it to the field as well,
	even though the spec makes no mention of doing this. To support
	this, QPDFFormFieldObjectHelper::getDefaultResources was added.

2021-02-25  Jay Berkenbilt  <ejb@ql.org>

	* Update StreamDataProvider examples to use copyStream() when they
	want to get to the original stream data from the provider. Prior
	to 10.2.0, we had to copy the stream to another QPDF, but now we
	can just use copyStream().

	* Bug fix/behavior change: when QPDF::replaceObject or
	QPDF::swapObjects is called, existing QPDFObjectHandle instances
	will now notice the change. This removes a long-standing source of
	bugs and confusing behavior.

2021-02-23  Jay Berkenbilt  <ejb@ql.org>

	* 10.2.0: release

	* The test for the input and output files being the same wasn't
	implemented correctly for --split-pages since the specified output
	file is really a pattern, not the actual output file.

2021-02-22  Jay Berkenbilt  <ejb@ql.org>

	* From qpdf CLI, --pages and --split-pages will properly preserve
	interactive form functionality. Fixes #340.

	* Add QPDFAcroFormDocumentHelper::copyFieldsFromForeignPage to
	copy form fields from a foreign page into the current file. (This
	method didn't work and was deprecated in 10.3.0.)

	* Add QPDFFormFieldObjectHelper::getTopLevelField to get the
	top-level field for a given form field.

	* Update pdf-overlay-page example to include copying of
	annotations.

	* Add a new version of QPDFPageObjectHelper::placeFormXObject that
	initializes the transformation matrix that was used so you don't
	have to call both placeFormXObject and
	getMatrixForFormXObjectPlacement.

2021-02-21  Jay Berkenbilt  <ejb@ql.org>

	* From qpdf CLI, --overlay and --underlay will copy annotations
	and form fields from overlay/underlay file. Fixes #395.

	* Add QPDFPageObjectHelper::copyAnnotations, which copies
	annotations and, if applicable, associated form fields, from one
	page to another, possibly transforming the rectangles.

	* Bug fix: --flatten-rotation now applies the required
	transformation to annotations on the page.

	* Add QPDFAcroFormDocumentHelper::transformAnnotations to apply a
	transformation to a group of annotations.

	* Add QPDFObjGen::unparse()

	* Add QPDFObjectHandle::copyStream() for making a copy of a stream
	within the same QPDF instance.

	* Allow QPDFObjectHandle::newArray and
	QPDFObjectHandle::newFromMatrix take QPDFMatrix as well as
	QPDFObjectHandle::Matrix

	* Make member variables a--f of QPDFMatrix public

2021-02-20  Jay Berkenbilt  <ejb@ql.org>

	* Allow --rotate=0 to clear rotation from a page.

2021-02-18  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFAcroFormDocumentHelper::addFormField, which adds a new
	form field, initializing the AcroForm dictionary if needed.

	* Add QPDFPageObjectHelper::getMatrixForFormXObjectPlacement,
	which returns the transformation matrix required to map from a
	form field's coordinate system into a specific rectangle within
	the page.

	* Add QUtil::path_basename to get last element of a path.

	* Add examples/pdf-attach-file.cc to illustrate new file
	attachment method and also new parse that takes indirect objects.

2021-02-17  Jay Berkenbilt  <ejb@ql.org>

	* Allow optional numeric argument to --collate. If --collate=n is
	given, pull n pages from the first file, n pages from the second
	file, etc., until we run out of pages.

2021-02-15  Jay Berkenbilt  <ejb@ql.org>

	* Add a version of QPDFObjectHandle::parse that takes a QPDF* as
	context so that it can parse strings containing indirect object
	references.

2021-02-14  Jay Berkenbilt  <ejb@ql.org>

	* Add new versions of QPDFObjectHandle::replaceStreamData that
	take std::function objects for cases when you need something
	between a static string and a full-fledged StreamDataProvider.
	Using this with QUtil::file_provider is a very easy way to create
	a stream from the contents of a file.

2021-02-12  Jay Berkenbilt  <ejb@ql.org>

	* Move formerly internal QPDFMatrix class to the public API. This
	class provides convenience methods for working with transformation
	matrices.

	* QUtil::double_to_string: trim trailing zeroes by default, and
	add option to not trim trailing zeroes. This causes a syntactic
	but semantically preserving change in output when doubles are
	converted to strings. The library uses double_to_string in only a
	few places. In practice, output will be different (trailing zeroes
	removed) in code that creates form XObjects (mostly generation of
	appearance streams for form fields as well as overlay and
	underlay) and in the flatten rotation code that was added in qpdf
	10.1.

2021-02-10  Jay Berkenbilt  <ejb@ql.org>

	* Require a C++-14 compiler.

	* Detect loops when adding when reading outlines dictionary upon
	initialization of QPDFOutlineDocumentHelper (fuzz issue 30507).

	* Add "attachments" as an additional json key, and add some
	information about attachments to the json output.

	* Add new command-line arguments for operating on attachments:
	--list-attachments, --add-attachment, --remove-attachment,
	--copy-attachments-from. See --help and manual for details.

2021-02-09  Jay Berkenbilt  <ejb@ql.org>

	* Add methods to QUtil for working with PDF timestamp strings:
	pdf_time_to_qpdf_time, qpdf_time_to_pdf_time,
	get_current_qpdf_time.

2021-02-08  Jay Berkenbilt  <ejb@ql.org>

	* Add helper classes for file attachments:
	QPDFEmbeddedFileDocumentHelper, QPDFFileSpecObjectHelper,
	QPDFEFStreamObjectHelper. See their header files for details.

2021-02-07  Jay Berkenbilt  <ejb@ql.org>

	* Add new functions QUtil::pipe_file and QUtil::file_provider for
	sending the contents of a file through a pipeline as binary data.

2021-02-04  Jay Berkenbilt  <ejb@ql.org>

	* Add new option --password-file=file for reading the decryption
	password from a file. file may be "-" to read from standard input.
	Fixes #499.

	* By default, give an error if a user attempts to encrypt a file
	with a 256-bit key, a non-empty user password, and an empty owner
	password. Such files are insecure since they can be opened with no
	password. To allow explicit creation of files like this, pass the
	new --allow-insecure option. Thanks to github user RobK88 for a
	detailed analysis and for reporting this issue. Fixes #501.

2021-02-02  Jay Berkenbilt  <ejb@ql.org>

	* Bug fix: if a form XObject lacks a resources dictionary,
	consider any names in that form XObject to be referenced from the
	containing page. This is compliant with older PDF versions. Also
	detect if any form XObjects have any unresolved names and, if so,
	don't remove unreferenced resources from them or from the page
	that contains them. Fixes #494.

2021-01-31  Jay Berkenbilt  <ejb@ql.org>

	* Bug fix: properly handle strings if they appear in inline image
	dictionaries while externalizing inline images.

2021-01-30  Jay Berkenbilt  <ejb@ql.org>

	* Add examples/pdf-name-number-tree.cc to illustrate new
	name/number tree API and new array/dictionary iterator API.

2021-01-29  Jay Berkenbilt  <ejb@ql.org>

	* Add methods to QPDFObjectHandle that provide a C++ iterator API,
	including C++11 range-for iteration, over arrays and dictionaries.
	With this, you can do

	for (auto i: dict_oh.ditems())
	{
	    // i.first is a string, i.second is a QPDFObjectHandle
	}
	for (auto i: array_oh.aitems())
	{
	    // i is a QPDFObjectHandle
	}

	* QPDFObjectHandle::is* methods to check type now return false on
	uninitialized objects rather than crashing or throwing a logic
	error.

2021-01-24  Jay Berkenbilt  <ejb@ql.org>

	* Implement remove for name and number trees as well as exposing
	remove and insertAfter methods for iterators. With this addition,
	qpdf now has robust read/write support for name and number trees.

2021-01-23  Jay Berkenbilt  <ejb@ql.org>

	* Add an insert method to QPDFNameTreeObjectHelper and
	QPDFNumberTreeObjectHelper.

	* QPDFNameTreeObjectHelper and QPDFNumberTreeObjectHelper will
	automatically repair broken name and number trees by default. This
	behavior can be turned off.

	* Change behavior of QPDFObjectHandle::newUnicodeString so that it
	encodes ASCII or PDFDocEncoding if those encodings will support
	all the characters in the string, resorting to UTF-16 only if the
	other encodings are insufficient. This is a cleaner implementation
	of the intention of encoding strings for use outside of contents
	and results in fewer instances of ASCII strings being needlessly
	encoded as UTF-16. This change may cause qpdf to generate
	different output from the same input when form field values are
	set using methods from QPDFFormFieldObjectHelper.

2021-01-16  Jay Berkenbilt  <ejb@ql.org>

	* Add new constructors for QPDFNameTreeObjectHelper and
	QPDFNumberTreeObjectHelper that take a QPDF object so they can
	create indirect objects and issue warnings. The old constructors
	are deprecated and will be removed in qpdf 11. Just pass in the
	owning QPDF of the object handle used to initialize the helpers.

	* Re-implement QPDFNameTreeObjectHelper and
	QPDFNumberTreeObjectHelper to be much more efficient and to have
	an iterator-based API in addition to the existing one. This makes
	it possible to use "range-for" loops over these helpers and to
	iterate through name and number trees without creating a map
	containing all the keys and values, which is slow and potentially
	consumes a lot of memory.

	* Add warn() to QPDF's public API.

2021-01-11  Jay Berkenbilt  <ejb@ql.org>

	* Fix very old error in code that was finding attachment streams.
	Probably this error never mattered, but the code was still not
	exactly right.

2021-01-06  Jay Berkenbilt  <ejb@ql.org>

	* Give warnings instead of segfaulting if a QPDF operation is
	attempted after calling closeInputSource(). Fixes #495.

2021-01-05  Jay Berkenbilt  <ejb@ql.org>

	* 10.1.0: release

2021-01-04  Jay Berkenbilt  <ejb@ql.org>

	* When qpdf CLI extracts pages, it now only attempts to remove
	unreferenced resources from the pages that it is keeping. This
	change dramatically reduces the time it takes to extract a small
	number of pages from a large, complex file.

	* Move getNext()->write() calls in some pipelines to ensure that
	state gates properly reset even if the next pipeline's write
	throws an exception (fuzz issue 28262).

2021-01-03  Jay Berkenbilt  <ejb@ql.org>

	* Don't include -o nospace with zsh completion setup so file
	completion works normally. Fixes #473.

2021-01-02  Jay Berkenbilt  <ejb@ql.org>

	* Make QPDFPageObjectHelper methods pipeContents, parseContents,
	and addContentTokenFilter work with form XObjects.

	* Rename some QPDFPageObjectHelper methods and make them support
	form XObjects as well as pages. The old names will be preserved
	from compatibility.
	- pipePageContents -> pipeContents
	- parsePageContents -> parseContents

	* Add QPDFObjectHandle::parseAsContents to apply ParserCallbacks
	to a form XObject.

	* QPDFPageObjectHelper::externalizeInlineImages can be called with
	form XObjects as well as pages.

	* Bug fix: QPDFPageObjectHelper::externalizeInlineImages was not
	descending into form XObjects on a page. It now does this by
	default. In the extremely unlikely event that anyone was actually
	depending on the old behavior, it is available by passing
	shallow=true to the externalizeInlineImages call.

	* Bug fix: QPDFObjectHandle::filterPageContents was broken for
	pages with an array of content streams. This caused
	externalize-inline-images to also be broken for this case.

2021-01-01  Jay Berkenbilt  <ejb@ql.org>

	* Add methods to QPDFPageObjectHelper: forEachXObject,
	forEachImage, forEachFormXObject to call a function on each
	XObject (or image or form XObject) in a page or form XObject,
	possibly recursing into nested form XObjects.

	* Add method QPDFPageObjectHelper::getFormXObjects to return a map
	of keys to form XObjects (non-recursively) from a page or form
	XObject.

	* Add method QPDFObjectHandle::isImage to test whether an object
	is an image.

2020-12-31  Jay Berkenbilt  <ejb@ql.org>

	* QPDFPageObjectHelper::removeUnreferencedResources can now be
	called with a QPDFPageObjectHelper created from a form XObject.
	The method already recursed into form XObjects.

	* Rename some QPDFPageObjectHelper methods and make them support
	form XObjects as well as pages. The old names will be preserved
	from compatibility.
	- getPageImages -> getImages
	- filterPageContents -> filterContents

	* Add QPDFObjectHandle::isFormXObject to test whether an object is
	a form XObject.

2020-12-30  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFPageObjectHelper::flattenRotation and --flatten-rotation
	option to the qpdf CLI. The flattenRotation method removes any
	/Rotate key from a page dictionary and implements the same
	rotation by modifying the page's contents such that the various
	page boxes are altered and the page renders identically. This can
	be used to work around buggy PDF applications that don't properly
	handle page rotation. The --flatten-rotation option to the qpdf
	CLI calls flattenRotation for every page.

2020-12-26  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFObjectHandle::setFilterOnWrite, which can be used to
	tell QPDFWriter not to filter a stream on output even if it can.
	You can use this to prevent QPDFWriter from touching a stream
	(either uncompressing or compressing) that you have optimized or
	otherwise ensured looks exactly the way you want it, even if
	decode level or stream compression would otherwise cause
	QPDFWriter to modify the stream.

	* Add ostream << for QPDFObjGen. (Don't ask why it took 7.5 years
	for me to decide to do this.)

2020-12-25  Jay Berkenbilt  <ejb@ql.org>

	* Refactor write code to eliminate an extra full traversal of
	objects in the file and to remove assumptions that preclude stream
	references from appearing in /DecodeParms of filterable streams.
	This results in an approximately 8% performance reduction in write
	times.

2020-12-23  Jay Berkenbilt  <ejb@ql.org>

	* Allow library users to provide their own decoders for stream
	filters by deriving classes from QPDFStreamFilter and registering
	them using QPDF::registerStreamFilter. Registered stream filters
	provide code to validate and interpret /DecodeParms for a specific
	/Filter and also to provide a pipeline that will decode. Note that
	it is possible to encode to a filter type that is not supported
	even without this feature. See examples/pdf-custom-filter.cc for
	an example of using custom stream filters.

2020-12-22  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFObjectHandle::makeDirect(bool allow_streams) -- if
	allow_streams is true, preserve indirect references to streams
	rather than throwing an exception. This allows the object to be
	made as direct as possible while preserving stream references.

2020-12-20  Jay Berkenbilt  <ejb@ql.org>

	* Add qpdf_register_progress_reporter method to C API,
	corresponding to QPDFWriter::registerProgressReporter. Fixes #487.

2020-11-28  Jay Berkenbilt  <ejb@ql.org>

	* Add new functions to the C API for manipulating
	QPDFObjectHandles. The new functions allow creation and
	modification of objects, which brings a lot of additional power to
	the C API. See include/qpdf/qpdf-c.h for details and
	examples/pdf-c-objects.c for a simple example.

2020-11-21  Jay Berkenbilt  <ejb@ql.org>

	* 10.0.4: release

	* Fix QIntC::range_check to handle negative numbers properly (fuzz
	issue 26994).

2020-11-11  Jay Berkenbilt  <ejb@ql.org>

	* Treat a direct page object as a runtime error rather than a
	logic error since it is actually possible to create a file that
	has this (fuzz issue 27393).

2020-11-09  Jay Berkenbilt  <ejb@ql.org>

	* Handle "." appearing in --pages not preceded by a numeric range
	as a special case in command-line parsing code.

2020-11-04  Jay Berkenbilt  <ejb@ql.org>

	* Ignore the value of the offset/generation field in an xref entry
	for a deleted object. Also attempt file recovery on lower-level
	exceptions thrown while reading the xref table. Fixes #482.

2020-10-31  Jay Berkenbilt  <ejb@ql.org>

	* 10.0.3: release

	* Don't enter extension initialization in QPDFWriter on a direct
	object. Fixes stack overflow in pathological case of /Root being a
	direct object (fuzz issue 26761).

	* My previous fix to #449 (handling foreign streams with indirect
	objects in /Filter and/or /DecodeParms) was incorrect and caused
	other problems. There is a now a correct fix to the original
	problem. Fixes #478.

2020-10-27  Jay Berkenbilt  <ejb@ql.org>

	* 10.0.2: release

2020-10-25  Jay Berkenbilt  <ejb@ql.org>

	* When signing distribution files, generate sha256 checksums
	instead of md5, sha1, and sha512. sha256 seems to be more widely
	used, and there's no reason to use md5 or sha1 anymore.

	* Official Windows releases are now built using the openssl crypto
	provider. The native provider is still available for selection at
	runtime using the QPDF_CRYPTO_PROVIDER environment variable.

	* Bug fix: --no-warn was not suppressing some warnings that might
	be generated by --split-pages.

2020-10-23  Jay Berkenbilt  <ejb@ql.org>

	* Bug fix: when concatenating content streams, insert a newline if
	needed to prevent the last token from the old stream from being
	merged with the first token of the new stream. Qpdf was mistakenly
	concatenating the streams without regard to the specification that
	content streams are to be broken on token boundaries. Fixes #444.

	* fix-qdf: handle empty streams better with ignore newline by
	treating them as empty even though, technically, a blank line
	would be required inside the Stream. This just makes it easier to
	add place-holder empty streams while editing qdf files by hand.

2020-10-22  Jay Berkenbilt  <ejb@ql.org>

	* Fix memory leak that could occur if objects in object streams
	were resolved more than once and the objects within the object
	streams contained circular references. This leak could be
	triggered when qpdf was run with --object-streams=generate on
	files that already had object streams containing circular
	references (fuzz issue 23642).

	* Add QIntC::range_check for checking to see whether adding two
	numbers together will cause an overflow.

	* Fix loop detection problem when traversing page thumbnails
	during optimization (fuzz issue 23172).

2020-10-21  Jay Berkenbilt  <ejb@ql.org>

	* Bug fix: properly handle copying foreign streams that have
	indirect /Filter or /DecodeParms keys when stream data has been
	replaced. The circumstances leading to this bug are very unusual
	but would cause qpdf to either generate an internal error or some
	other kind of warning situation if it would occur. Fixes #449.

	* Qpdf's build and CI has been migrated from Azure Pipelines
	(Azure DevOps) to GitHub Actions.

	* Remove some fuzz files that triggered Mal/PDFEx-H with some
	virus scanners. There's plenty of coverage in the fuzz corpus
	without these files, and it's a nuisance to have virus checkers
	remove them. Fixes #460.

	* Ensure that numeric conversion is not affected by the user's
	global locale setting. Fixes #459.

	* Add qpdf-<version>-linux-x86_64.zip to the list of built
	distributions. This is a simple zip file that contains just the
	qpdf executables and the dependent shared libraries that would not
	ordinarily be present on a base system. This minimal binary
	distribution works as is when used as a Lambda layer in AWS and
	could be suitable for inclusion in a docker image or other
	standalone Linux/x86_64 environment where you want minimal support
	for running the qpdf executable. Fixes #352.

2020-10-20  Jay Berkenbilt  <ejb@ql.org>

	* Add --warning-exit-0 option to the qpdf command line. When
	specified, qpdf will exit with a status of 0 rather than 3 when
	there are warnings without errors. Combine with --no-warn to
	completely ignore warnings.

	* Bug fix: fix further cases in which errors were written to
	stdout. Fixes #438.

	* Build option: add --disable-rpath option to ./configure, which
	disables passing -rpath to the linker when building shared
	libraries with libtool. Fixes #422.

2020-10-16  Jay Berkenbilt  <ejb@ql.org>

	* Accept pull request that improves how the Windows native crypto
	provider is obtained.

	* Accept pull request that improves performance in processing
	files in memory.

	* Accept pull requests that improve openssl configuration and
	error reporting.

	* Build using GitHub Actions. The intention is that this will
	replace Azure Pipelines as the official CI for qpdf for the next
	release.

2020-10-15  Jay Berkenbilt  <ejb@ql.org>

	* Make many minor improvements to the build process and code
	health, including fixing a lgtm warning and compiler warnings from
	newer version of gcc and MSVC toolchains. Add several cosmetic
	improvements to build output in CI.

	* Added LL_FMT to config.h.in. This is populated automatically by
	autoconf, but if build with your own build system, you may need to
	define it as whatever the format string needed by printf for long
	long is. Usually this is "%lld", but it can be "%I64d" for some
	older Windows-based compilers.

2020-04-29  Jay Berkenbilt  <ejb@ql.org>

	* Bug fix: qpdf --check was writing errors and warnings reported
	by checkLinearization to stdout instead of stderr. Fixes #438.

2020-04-09  Jay Berkenbilt  <ejb@ql.org>

	* 10.0.1: release

2020-04-08  Jay Berkenbilt  <ejb@ql.org>

	* Bug fix: qpdf 10.0.0 introduced a bug in which
	QPDFObjectHandle::getStreamData would return the raw data when
	called on an unfilterable stream instead of throwing an exception
	like it's supposed to. Fixes #425.

2020-04-07  Jay Berkenbilt  <ejb@ql.org>

	* Improve pdf-invert-images example to show a pattern of copying
	streams into another QPDF object to enable a stream data provider
	to access the original stream data.

	* Fix error that caused a compilation error with clang. Fixes
	#424.

2020-04-06  Jay Berkenbilt  <ejb@ql.org>

	* 10.0.0: release

	* Move random number generation into the crypto providers. The old
	os-based secure random number generation with fallback to insecure
	random number generation (only if allowed at build time) has moved
	into the native crypto provider. If using other providers
	(currently gnutls or openssl), random number generation will use
	those libraries. The old interfaces for supplying your own random
	number generator are still in place. Fixes #418.

	* Source-level incompatibility: remove QUtil::srandom. There was
	no reason to ever call this, and it didn't do anything unless
	insecure random number generation was compiled in, which it is not
	by default. If you were calling this, just remove the call because
	it wasn't doing anything anyway.

	* Add openssl crypto provider, contributed by Dean Scarff. This
	provider is implemented using OpenSSL and also works with
	BoringSSL.

2020-04-04  Jay Berkenbilt  <ejb@ql.org>

	* Add a new provideStreamData method for StreamDataProvider that
	allows a success code to be returned and that accepts the
	suppress_warnings and will_retry methods. This makes it possible
	to have a StreamDataProvider call pipeStreamData and propagate its
	results back. This change allows better error handling and
	recovery when objects are copied from other files and when
	"immediate copy from" is enabled.

	* When copying foreign streams, the same type of recovery from
	streams with filtering errors is performed as when dealing with
	streams in the original input. This could happen, for example, if
	you are using the --pages option to take pages from another file
	and that file has errors in it.

	* Add a new version of QPDFObjectHandle::pipeStreamData whose
	return value indicates overall success or failure rather than
	whether nor not filtering was attempted. It should have always
	been this way. This change was done in a backward-compatible
	fashion. Previously existing pipeStreamData methods' return values
	mean the same as always.

	* Add "objectinfo" section to json output. In this release,
	information about whether each object is a stream or not is
	provided. There's otherwise no way to tell conclusively from the
	json output. Over time, other computed information about objects
	may be added here.

	* Add new option --remove-unreferenced-resources that takes auto,
	yes, or no as options. This tells qpdf whether to attempt to
	remove unreferenced resources from pages when doing page splitting
	operations. Prior to this change, the default was to attempt to
	remove unreferenced resources, but this operation was very slow,
	especially for large and complex files. The new default is "auto",
	which tells qpdf to analyze the file for shared resources. This is
	a relatively quick test. If no shared resources are found, then we
	don't attempt to remove unreferenced resources, because
	unreferenced resources never occur in files without shared
	resources. To force qpdf to look for and remove unreferenced
	resources, use --remove-unreferenced-resources=yes. The option
	--preserve-unreferenced-resources is now a synonym for
	--remove-unreferenced-resources=no.

	* Use std::atomic for unique ID generation internally within the
	library. This eliminates the already extremely low chance of a
	collision, improves thread safety, and removes a dependency on a
	random number generator. Thanks to Dean Scarff for the
	contribution.

2020-04-03  Jay Berkenbilt  <ejb@ql.org>

	* Allow qpdf to be built on systems without wchar_t. All "normal"
	systems have wchar_t because it is part of the C++ standard, but
	there are some stripped down environments that don't have it. See
	README.md (search for wchar_t) for instructions and a discussion.
	Fixes #406.

	* Add two extra optional arguments to
	QPDFPageObjectHelper::placeFormXObject to control whether the
	placed item is allowed to be shrunk or expanded to fit within or
	maximally fill the destination rectangle. Prior to this change,
	placeFormXObject might shrink it but would never expand it.

	* When calling the C API, accept any non-zero value as TRUE rather
	than just 1. This appears to resolve issues on Windows when
	calling some versions of the DLL directly from other languages.

2020-04-02  Jay Berkenbilt  <ejb@ql.org>

	* Add method QPDFObjectHandle::unsafeShallowCopy for copying only
	top-level dictionary keys or array items. See comments in
	QPDFObjectHandle.hh for when this should be used.

	* Remove Members class indirection for QPDFObjectHandle. Those are
	copied and assigned too often, and that change caused a very
	substantial performance hit.

2020-03-31  Jay Berkenbilt  <ejb@ql.org>

	* When detecting unreferenced images during page splitting, if any
	XObjects are form XObjects, recursively descend into them and
	remove any unreferenced objects from them too. Fixes #373.

	* Add QPDFObjectHandle::filterAsContents, which filters a stream's
	data as if it were page contents. This can be useful to filter
	form XObjects the same way we would filter page contents.

	* If QPDF_EXECUTABLE is set, use it as the path to qpdf for
	purposes of completion. This variable is only read during the
	execution of `qpdf --completion-zsh` and `qpdf
	--completion-bash`. It is not used during the actual evaluation of
	completions.

2020-02-22  Jay Berkenbilt  <ejb@ql.org>

	* Update pdf-set-form-values.cc to use and mention
	generateAppearance, which hadn't been added when the example was
	originally created.

	* Detect, warn, and correct the case of /Pages in the document
	catalog incorrectly pointing to a page or intermediate node
	instead of the root of the pages tree. Fixes #398.

2020-01-26  Jay Berkenbilt  <ejb@ql.org>

	* 9.1.1: release

	* Bug fix: in qdf mode, do not write out any XRef streams that may
	have appeared in the original file. These are usually
	unreferenced, but with --preserve-unreferenced, they could be
	written out, which breaks fix-qdf's assumption that there is at
	most one XRef stream and that it appears at the end of the file.
	Fixes #386.

	* Bug fix: when externalizing inline images, a colorspace value
	that was a lookup key in the page's /Resource -> /ColorSpace
	dictionary was not properly handled. Fixes #392.

	* Add "encrypt" key to the json output. This contains largely the
	same information as given by --show-encryption but in a
	consistent, parseable format.

	* Add options --is-encrypted and --requires-password. These can be
	used with files, including encrypted files with unknown passwords,
	to determine whether or not a file is encrypted and whether a
	password is required to open the file. The --requires-password
	option can also be used to determine whether a supplied password
	is correct. Information is supplied through exit codes, making
	these options particularly useful for shell scripts. Fixes #390.

2020-01-14  Jay Berkenbilt  <ejb@ql.org>

	* Fix for Windows being unable to acquire crypt context with a new
	keyset. Thanks to Cloudmersive for the fix. Fixes #387.

	* Rewrite fix-qdf in C++. This means fix-qdf is a proper
	executable now, and there is no longer a runtime requirement on
	perl.

	* Add QUtil::call_main_from_wmain, a helper function that can be
	called in the body of wmain to convert UTF-16 arguments to UTF-8
	arguments and then call another main function.

2020-01-13  Jay Berkenbilt  <ejb@ql.org>

	* QUtil::read_lines_from_file: add new versions that use FILE*,
	use FILE* instead if std::ifstream internally to support correct
	handling of Unicode filenames in Windows, and add the option to
	preserve line endings.

2019-11-17  Jay Berkenbilt  <ejb@ql.org>

	* 9.1.0: release

	* This is the first version of qpdf that requires C++-11.

2019-11-09  Jay Berkenbilt  <ejb@ql.org>

	* 9.1.rc1: release

	* Improve behavior of wildcard expansion for msvc executable when
	run from the Windows cmd.exe shell. Unlike in UNIX environments,
	Windows leaves it up to the executable to expand its own
	wildcards. Fixes #224.

	* Allow :even or :odd to be appended to numeric ranges for
	--pages, --rotate, and other options that take page ranges.

	* When reading /P from the encryption dictionary, use static_cast
	instead of QIntC to convert the value to a signed integer. The
	value of /P is a bit field, and PDF files have been found in the
	wild where /P is represented as an unsigned integer even though
	the spec states that it is a signed 32-bit value. By using
	static_cast, we allow qpdf to compensate for writers that
	incorrectly represent the correct bit field as an unsigned value.
	Fixes #382.

2019-11-05  Jay Berkenbilt  <ejb@ql.org>

	* Add support for pluggable crypto providers, enabling multiple
	implementations of the cryptographic functions needed by qpdf.
	This feature was added by request of Red Hat, which recognized the
	use of qpdf's native crypto implementations as a potential
	security liability, preferring instead to get all crypto
	functionality from a third-party library that receives a lot of
	scrutiny. However it was also important to me to not impose any
	unnecessary third party dependencies on my users or packagers,
	some of which build qpdf for lots of environments, some of which
	may not easily support gnutls. Starting in qpdf 9.1.0, it is be
	possible to build qpdf with both the native and gnutls crypto
	providers or with either in isolation. In support of this feature,
	new classes QPDFCryptoProvider and QPDFCryptoImpl have been added
	to the public interface. See QPDFCryptoImpl.hh for details about
	adding your own crypto provider and QPDFCryptoProvider.hh for
	details about choosing which one is used. Note that selection of
	crypto providers is invisible to anyone who doesn't explicitly
	care. Neither end users nor developers have to be concerned about
	it.

	* The environment variable QPDF_CRYPTO_PROVIDER can be used to
	override qpdf's default choice of crypto provider. The
	--show-crypto flag to the qpdf CLI can be used to present a list
	of supported crypto providers with the default provider always
	listed first.

	* Add gnutls crypto provider. Thanks to Zdenek Dohnal for
	contributing the code that I ultimately used in the gnutls crypto
	provider and for engaging in an extended discussion about this
	feature. Fixes #218.

2019-10-22  Jay Berkenbilt  <ejb@ql.org>

	* Incorporate changes from Masamichi Hosoda <trueroad@trueroad.jp>
	to properly handle signature in the following ways:
	  - Always represent /Contents in a signature dictionary as a hex
	    string
	  - Do not compress signature dictionaries when generating object
	    streams
	  - Do not encrypt/decrypt the /Contents field of the signature
	    dictionary when creating or reading encrypted files

	* Incorporate changes from Masamichi Hosoda <trueroad@trueroad.jp>
	to add additional methods for making it possible to gain deeper
	insight into cross reference tables and object renumbering. These
	new API calls make it possible for applications to go into PDF
	files created by qpdf and make changes to them that go beyond
	working with the PDF at the object level. The specific use case
	for these changes was to write an external tool to perform digital
	signature, but there could be other uses as well. New methods
	include the following, all of which are described in their
	respective headers:
	  - QPDF::getXRefTable()
	  - QPDFObjectHandle::getParsedOffset()
	  - QPDFWriter::getRenumberedObjGen(QPDFObjGen)
	  - QPDFWriter::getWrittenXRefTable()

2019-10-12  Jay Berkenbilt  <ejb@ql.org>

	* 9.0.2: release

	* Change the name of the temporary file used by --replace-input to
	work with arbitrary absolute or relative paths without requiring
	path splitting logic. Fixes #365.

2019-09-20  Jay Berkenbilt  <ejb@ql.org>

	* 9.0.1: release

2019-09-19  Jay Berkenbilt  <ejb@ql.org>

	* When converting an array to a Rectangle, ensure that llx <= urx
	and lly <= ury. This prevents flatten-annotations from flipping
	fields whose coordinates are messed up in the input. Fixes #363.

	* Warn when duplicated dictionary keys are found during parsing.
	The behavior remains as before: later keys override earlier ones.
	However, this generates a warning now rather than being silently
	ignored. Fixes #345.

2019-09-17  Jay Berkenbilt  <ejb@ql.org>

	* Fix a few integer warnings for big-endian systems.

	* QIntC tests: don't assume char is signed. Fixes #361.

2019-08-31  Jay Berkenbilt  <ejb@ql.org>

	* 9.0.0: release

	* Add QPDF::anyWarnings() method to find out whether there have
	been any warnings without resetting the list.

	* Add QPDF::closeInputSource() method to release the input source
	so the input file can be deleted or renamed.

	* Add methods rename_file and remove_file to QUtil.

2019-08-24  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDF::userPasswordMatched() and QPDF::ownerPasswordMatched()
	methods so it can be determined separately whether the supplied
	password matched the user password, the owner password, or both.
	Fixes #159.

2019-08-23  Jay Berkenbilt  <ejb@ql.org>

	* Add --recompress-streams option to qpdf and
	QPDFWriter::setRecompressFlate to cause QPDFWriter to recompress
	streams that are already compressed with /FlateDecode.

	* Add option Pl_Flate::setCompressionLevel to globally set the
	zlib compression level used by all Pl_Flate pipelines.

	* Add --compression-level flag to qpdf to set the zlib compression
	level. When combined with --recompress-flate, this will cause most
	of qpdf's streams to use the maximum compression level. This
	results in only a very small amount of savings in size that comes
